JDP2S02S

JDP2S02S TOSHIBA Diode Silicon Epitaxial PIN Type JDP2S02S UHF~VHF Band RF Attenuator Applications Unit: mm · · · Suitable for reducing set’s size as a result from enabling high-density mounting due to 2-pin small packages. Low series resistance: rs = 1.0 Ω (typ.) Low capacitance: CT = 0.3 pF (typ.) Maximum Ratings (Ta = 25°C) Characteristics Reverse voltage Forward current Junction temperature Storage temperature range Symbol VR IF Tj Tstg Rating 30 50 150 −55~150 Unit V mA °C °C JEDEC JEITA TOSHIBA ― ― 1-1K1A Electrical Characteristics (Ta = 25°C) Characteristics Reverse voltage Reverse current Forward voltage Capacitance Series resistance Symbol VR IR VF CT rs Test Condition IR = 10 µA VR = 30 V IF = 50 mA VR = 1 V, f = 1 MHz IF = 10 mA, f = 100 MHz Weight: 0.0011 g Min 30 ¾ ¾ ¾ ¾ Typ. ¾ ¾ 0.9 0.3 1.0 Max ¾ 0.1 0.94 0.5 1.5 Unit V µA V pF Ω Note: Signal level when capacitance is measured. Vsig = 20 mVrms Marking 2 1 2001-12-05 JDP2S02S CT – VR 3 f = 1 MHz Ta = 25°C 100 0.5 f = 0.1 GHz rs – IF Ta = 25°C Tester: HP4291A (pF) 1 (9) Series resistance rs Capacitance CT 1.0 1.5 10 0.5 0.3 1.5 1.0 0.5 1 0.1 1 3 5 10 30 50 f = 0.1 GHz 0.5 0.01 0.1 1 10 Reverse voltage VR (V) Forward current IF (mA) 2 2001-12-05 JDP2S02S RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2001-12-05