RN1101MFV,L3F

  RN1101MFV∼RN1106MFV   TOSHIBA Transistor     Silicon NPN Epitaxial Type (PCT Process)                 RN1101MFV,RN1102MFV,RN1103MFV RN1104MFV,RN1105MFV,RN1106MFV Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications   Unit: mm z Ultra-small package, suited to very high density mounting Equivalent Circuit and Bias Resistor Values               Type No. R1 (kΩ) R2 (kΩ) RN1101MFV 4.7 4.7 RN1102MFV 10 10 RN1103MFV 22 22                 RN1104MFV 47 47   RN1105MFV 2.2 47 RN1106MFV 4.7 47 VESM 1. BASE 2. EMITTER 3. COLLECTOR JEDEC ― JEITA TOSHIBA Absolute Maximum Ratings (Ta = 25°C) 0.32 ± 0.05 3 0.5 ± 0.05   1 2       1 0.4 0.8 ± 0.05   1.2 ± 0.05           z Complementary to the RN2101MFV to RN2106MFV 0.80 ± 0.05 0.4 z A wide range of resistor values is available for use in various circuits. 1.2 ± 0.05 0.22 ± 0.05 z Incorporating a bias resistor into the transistor reduces the number of parts,   so enabling the manufacture of ever more compact equipment and   lowering assembly cost.   0.13 ± 0.05   ― 2-1L1A Weight: 1.5 mg (typ.)   Characteristic Collector-base voltage   Collector-emitter voltage   Rating VCBO 50 V VCEO 50 V RN1101MFV to 1106MFV RN1101MFV to 1104MFV Emitter-base voltage   Collector power dissipation   10 VEBO RN1105MFV, 1106MFV Collector current Junction temperature Symbol RN1101MFV to 1106MFV 5 Unit V IC 100 mA PC(Note 1) 150 mW Tj 150 °C Tstg −55 to 150 °C Storage temperature range Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Mounted on an FR4 board (25.4 mm × 25.4 mm × 1.6 mm)   0.5 Pad Dimension（Reference） unit：mm 0.45       1.15 0.4   0.45   0.4   0.4 1 2010-03-07   RN1101MFV∼RN1106MFV   Electrical Characteristics (Ta = 25°C)     Characteristic   Collector cutoff current         Emitter cutoff current     Test Circuit Symbol ICBO RN1101MFV to 1106MFV ― ICEO RN1102MFV           RN1103MFV     RN1101MFV RN1104MFV IEBO Test Condition       DC current gain RN1102MFV       RN1103MFV   RN1101MFV RN1104MFV     hFE   ― ― 500 0.82 ― 1.52 0.38 ― 0.71     0.17 ― 0.33   0.082 ― 0.15 0.078 ― 0.145 0.074 ― 0.138 30 ― ― 50 ― ― 70 ― ― 80 ― ― 80 ― ― VEB = 10 V, IC = 0   VCE = 5 V, IC = 10 mA         Input voltage (ON) 80 RN1101MFV to 1106MFV RN1101MFV RN1102MFV       RN1103MFV   RN1104MFV VCE (sat)     VI (ON) IC = 5 mA, IB = 0.5 mA ―         ― VCE = 0.2 V, IC = 5 mA RN1105MFV   Input voltage (OFF) Collector output capacitance         Input resistor RN1101MFV to 1104MFV     RN1105MFV, 1106MFV RN1101MFV to 1106MFV   RN1101MFV RN1102MFV       RN1103MFV   RN1104MFV VI (OFF)   Cob   ― R1 VCB = 10 V, IE = 0, f = 1 MHz ―       VCE = 5 V, IC = 0.1 mA     ―   ― RN1105MFV   Resistor ratio RN1101MFV to 1104MFV RN1105MFV     R1/R2   ― RN1106MFV   2   ―   0.3 V 2.0 1.2 ― 2.4     1.3 ― 3.0   1.5 ― 5.0 0.6 ― 1.1 1.0 0.5 ― ―       ― ― 0.7     1.5   ― pF 4.7 6.11 10 13     15.4 22 28.6   32.9 47 61.1 1.54 2.2 2.86 4.7 V 0.8 7 1.0 V 1.3   3.29   mA   ― 0.8 ― 0.1 nA 1.1 3.29 RN1106MFV   ― ―   0.7 RN1106MFV   Unit VCE = 50 V, IB = 0 RN1106MFV Collector-emitter saturation voltage Max 100 RN1105MFV     ―     ― Typ. ― VEB = 5 V, IC = 0 RN1106MFV         VCB = 50 V, IE = 0 ― RN1105MFV Min kΩ 6.11   1.2 0.0376 0.0468 0.0562 0.08 0.1 0.12   2010-03-07   RN1101MFV∼RN1106MFV       RN1101MFV RN1102MFV                             COLLECTOR CURRENT IC (mA) COMMON EMITTER VCE = 0.2V INPUT VOLTAGE VI (ON) (V)       RN1103MFV RN1104MFV                                           RN1105MFV   RN1106MFV 3 2010-03-07   RN1101MFV∼RN1106MFV         RN1101MFV RN1102MFV RN1103MFV RN1104MFV RN1105MFV RN1106MFV                                                                               4 2010-03-07   RN1101MFV∼RN1106MFV         RN1101MFV RN1102MFV RN1103MFV RN1104MFV                                                                             RN1105MFV   RN1106MFV 5 2010-03-07   RN1101MFV∼RN1106MFV       RN1101MFV   RN1103MFV RN1104MFV RN1105MFV RN1106MFV RN1102MFV                                                                               6 2010-03-07   RN1101MFV∼RN1106MFV       Type Name         RN1101MFV         RN1102MFV RN1103MFV RN1104MFV   XB       XC       XD   RN1105MFV                         XA                   Marking                   XE   RN1106MFV       XF 7 2010-03-07   RN1101MFV∼RN1106MFV   RESTRICTIONS ON PRODUCT USE   • Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS. • Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.   8 2010-03-07