RN1313

RN1312,RN1313 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) RN1312,RN1313 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications l With built-in bias resistors l Simplify circuit design l Reduce a quantity of parts and manufacturing process l Complementary to RN2312, RN2313 Unit: mm Equivalent Circuit Maximum Ratings (Ta = 25°C) Characteristic Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 50 50 5 100 100 150 125 −55~125 Unit V V V mA mA mW °C °C JEDEC EIAJ TOSHIBA Weight: 0.006g ― SC-70 2-2E1A Electrical Characteristics (Ta = 25°C) Characteristic Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Transition frequency Collector output capacitance Input resistor RN1312 RN1313 Symbol ICBO IEBO hFE VCE (sat) fT Cob R1 Test Circuit ― ― ― ― ― ― ― Test Condition VCB = 50V, IE = 0 VEB = 5V, IC = 0 VCE = 5V, IC = 1mA IC = 5mA, IB = 0.25mA VCE = 10V, IC = 5mA VCB = 10V, IE = 0, f = 1MHz ― Min ― ― 120 ― ― ― 15.4 32.9 Typ. ― ― ― 0.1 250 3 22 47 Max 100 100 700 0.3 ― 6 28.6 61.1 V MHz pF kΩ Unit nA nA 1 2001-06-07 RN1312,RN1313 2 2001-06-07 RN1312,RN1313 3 2001-06-07 RN1312,RN1313 Type Name Marking RN1312 RN1313 4 2001-06-07 RN1312,RN1313 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 5 2001-06-07