RN1314 to RN1318
Bipolar Transistors
Silicon NPN Epitaxial Type (PCT Process)(Bias Resistor built-in Transistor)
RN1314/15/16/17/18
1. Applications
•
Switching
•
Inverter Circuits
•
Interfacing
•
Driver Circuits
2. Features
(1)
AEC-Q101 qualified (Please see the orderable part number list)
(2)
The integrated bias resistor reduces the number of external parts required, making it possible to reduce
system size and assembly time.
(3)
Toshiba offers transistors with a wide range of resistance to accommodate various circuit designs.
(4)
Complementary to RN2314 to RN2318
3. Equivalent Circuit
4. Bias Resistor Values
Part No.
R1 (kΩ)
R2 (kΩ)
RN1314
1
10
RN1315
2.2
10
RN1316
4.7
10
RN1317
10
4.7
RN1318
47
10
Start of commercial production
2002-11
©2021
Toshiba Electronic Devices & Storage Corporation
1
2021-08-24
Rev.2.0
RN1314 to RN1318
5. Packaging and Pin Assignment
1: Base
2: Emitter
3: Collector
USM
6. Orderable part number
Orderable part number
RN1314
RN1315
RN1316
RN1317
RN1318
AEC-Q101
RN1314,LF
Note
�
RN1314,LXGF
YES
�
YES
RN1315,LF
General Use
(Note 1)
YES
RN1315,LXHF
YES
RN1316,LF
YES
RN1316,LXHF
YES
RN1317(TE85L,F)
YES
�
YES
RN1318(TE85L,F)
YES
�
YES
(Note 1)
General Use
(Note 1)
Unintended Use
(Note 1)
Automotive Use
General Use
(Note 1)
Unintended Use
(Note 1)
Automotive Use
�
�
Unintended Use
Automotive Use
�
�
(Note 1)
General Use
(Note 1)
�
RN1316,LXGF
Unintended Use
Automotive Use
�
RN1315,LXGF
Note
General Use
(Note 1)
Unintended Use
(Note 1)
Automotive Use
Note 1: For more information, please contact our sales or use the inquiry form on our website.
©2021
Toshiba Electronic Devices & Storage Corporation
2
2021-08-24
Rev.2.0
RN1314 to RN1318
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, T a = 25 �)
Characteristics
Collector-base voltage
RN1314～RN1318
Collector-emitter voltage
Emitter-base voltage
RN1314
Symbol
Rating
Unit
VCBO
50
V
VCEO
50
VEBO
5
RN1315
RN1316
7
RN1317
15
RN1318
Collector current
25
IC
100
mA
Collector power dissipation
PC
100
mW
Junction temperature
Tj
150
�
Storage temperature
Tstg
-55 to 150
Note:
RN1314～RN1318
V
6
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
©2021
Toshiba Electronic Devices & Storage Corporation
3
2021-08-24
Rev.2.0
RN1314 to RN1318
8. Electrical Characteristics (Unless otherwise specified, T a = 25 �)
Characteristics
Collector cut-off current
Emitter cut-off current
Symbol
Input voltage (ON)
nA
�
�
100
VCE = 50 V, IB = 0 mA
�
�
500
RN1314
IEBO
VEB = 5 V, IC = 0 mA
0.35
�
0.65
RN1315
VEB = 6 V, IC = 0 mA
0.37
�
0.71
RN1316
VEB = 7 V, IC = 0 mA
0.36
�
0.68
RN1317
VEB = 15 V, IC = 0 mA
0.78
�
1.46
VEB = 25 V, IC = 0 mA
0.33
�
0.63
VCE = 5 V, IC = 10 mA
50
�
�
30
�
�
RN1314�RN1316,
RN1318
hFE
mA
�
RN1314～
RN1318
VCE(sat)
IC = 5 mA, IB = 0.25 mA
�
0.1
0.3
V
RN1314
VI(ON)
VCE = 0.2 V, IC = 5 mA
V
0.6
�
2.0
RN1315
0.7
�
2.5
RN1316
0.8
�
2.5
RN1317
1.5
�
3.5
2.5
�
10.0
0.3
�
0.9
RN1315
0.3
�
1.0
RN1316
0.3
�
1.1
RN1317
0.3
�
2.3
RN1318
0.5
�
5.7
VCE = 10 V, IC = 5 mA
�
250
�
MHz
VCB = 10 V, IE = 0 mA, f = 1
MHz
�
3.0
6.0
pF
kΩ
RN1314
VI(OFF)
RN1314～
RN1318
fT
Collector output capacitance
RN1314～
RN1318
Cob
RN1314
R1
VCE = 5 V, IC = 0.1 mA
0.7
1.0
1.3
RN1315
-
1.54
2.2
2.86
RN1316
3.29
4.7
6.11
RN1317
7.0
10.0
13.0
32.9
47.0
61.1
�
0.1
�
RN1315
�
0.22
�
RN1316
�
0.47
�
RN1317
�
2.13
�
RN1318
�
4.7
�
RN1318
Resistor ratio
Unit
VCB = 50 V, IE = 0 mA
Transition frequency
Input resistance
Max
ICEO
RN1318
Input voltage (OFF)
Typ.
ICBO
RN1317
Collector-emitter saturation
voltage
Min
RN1314～
RN1318
RN1318
DC current gain
Test Condition
RN1314
©2021
Toshiba Electronic Devices & Storage Corporation
R1/R2
-
4
V
�
2021-08-24
Rev.2.0
RN1314 to RN1318
9. Marking
Fig. 9.1
Marking RN1314
Fig. 9.2
Marking RN1315
Fig. 9.3
Marking RN1316
Fig. 9.4
Marking RN1317
Fig. 9.5
Marking RN1318
©2021
Toshiba Electronic Devices & Storage Corporation
5
2021-08-24
Rev.2.0
RN1314 to RN1318
10. Characteristics Curves (Note)
Fig. 10.1
RN1314 I C -V I(ON)
Fig. 10.2
RN1315 I C -V I(ON)
Fig. 10.3
RN1316 I C -V I(ON)
Fig. 10.4
RN1317 I C -V I(ON)
Fig. 10.5
RN1318 I C -V I(ON)
Fig. 10.6
RN1314 I C -V I(OFF)
©2021
Toshiba Electronic Devices & Storage Corporation
6
2021-08-24
Rev.2.0
RN1314 to RN1318
Fig. 10.7
RN1315 I C -V I(OFF)
Fig. 10.8
RN1316 I C -V I(OFF)
Fig. 10.9
RN1317 I C -V I(OFF)
Fig. 10.10
RN1318 I C -V I(OFF)
Fig. 10.11
RN1314 h FE -I C
©2021
Toshiba Electronic Devices & Storage Corporation
Fig. 10.12
7
RN1315 h FE -I C
2021-08-24
Rev.2.0
RN1314 to RN1318
Fig. 10.13
RN1316 h FE -I C
Fig. 10.15
RN1318 h FE -I C
Fig. 10.16
RN1314 V CE(sat) -I C
RN1315 V CE(sat) -I C
Fig. 10.18
RN1316 V CE(sat) -I C
Fig. 10.17
©2021
Toshiba Electronic Devices & Storage Corporation
Fig. 10.14
8
RN1317 h FE -I C
2021-08-24
Rev.2.0
RN1314 to RN1318
Fig. 10.19
Note:
RN1317 V CE(sat) -I C
Fig. 10.20
RN1318 V CE(sat) -I C
The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
©2021
Toshiba Electronic Devices & Storage Corporation
9
2021-08-24
Rev.2.0
RN1314 to RN1318
Package Dimensions
Unit: mm
Weight: 6.0 mg (typ.)
Package Name(s)
TOSHIBA: 2-2E1S
Nickname: USM
©2021
Toshiba Electronic Devices & Storage Corporation
10
2021-08-24
Rev.2.0
RN1314 to RN1318
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as "TOSHIBA".
Hardware, software and systems described in this document are collectively referred to as "Product".
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE").
Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in
nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, and devices related to power plant.
IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
For details, please contact your TOSHIBA sales representative or contact us via our website.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS,
INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS
OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE,
USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
https://toshiba.semicon-storage.com/
©2021
Toshiba Electronic Devices & Storage Corporation
11
2021-08-24
Rev.2.0
