RN1412,RN1413
Bipolar Transistors
Silicon NPN Epitaxial Type (PCT Process)(Bias Resistor built-in Transistor)
RN1412,RN1413
1. Applications
•
Switching
•
Inverter Circuits
•
Interfacing
•
Driver Circuits
2. Features
(1)
AEC-Q101 qualified (Please see the orderable part number list)
(2)
The integrated bias resistor reduces the number of external parts required, making it possible to reduce
system size and assembly time.
(3)
Toshiba offers transistors with a wide range of resistance to accommodate various circuit designs.
(4)
Complementary to RN2412,RN2413
3. Equivalent Circuit
4. Packaging and Pin Assignment
1: Base
2: Emitter
3: Collector
S-Mini
Start of commercial production
1994-01
©2021
Toshiba Electronic Devices & Storage Corporation
1
2021-08-30
Rev.1.0
RN1412,RN1413
5. Orderable part number
Orderable part number
AEC-Q101
RN1412
RN1412,LF
RN1413
Note
�
RN1412,LXGF
YES
RN1412,LXHF
YES
RN1413,LF
General Use
(Note 1)
YES
RN1413,LXHF
YES
Unintended Use
(Note 1)
Automotive Use
�
RN1413,LXGF
Note
General Use
(Note 1)
Unintended Use
(Note 1)
Automotive Use
Note 1: For more information, please contact our sales or use the inquiry form on our website.
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, T a = 25 �)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
50
V
Collector-emitter voltage
VCEO
50
Emitter-base voltage
VEBO
5
Collector current
IC
100
mA
Collector power dissipation
PC
200
mW
Junction temperature
Tj
150
�
Storage temperature
Tstg
-55 to 150
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
©2021
Toshiba Electronic Devices & Storage Corporation
2
2021-08-30
Rev.1.0
RN1412,RN1413
7. Electrical Characteristics (Unless otherwise specified, T a = 25 �)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
nA
Collector cut-off current
ICBO
VCB = 50 V, IE = 0 mA
�
�
100
Emitter cut-off current
IEBO
VEB = 5 V, IC = 0 mA
�
�
100
hFE
VCE = 5 V, IC = 1 mA
DC current gain
Collector-emitter saturation
voltage
VCE(sat)
Transition frequency
fT
Collector output capacitance
Input resistance
Cob
RN1412
120
�
700
�
IC = 5 mA, IB = 0.25 mA
�
0.1
0.3
V
VCE = 10 V, IC = 5 mA
�
250
�
MHz
VCB = 10 V, IE = 0 mA, f = 1
MHz
�
3
6
pF
15.4
22
28.6
kΩ
32.9
47
61.1
R1
-
RN1413
8. Marking
Fig. 8.1
Marking RN1412
©2021
Toshiba Electronic Devices & Storage Corporation
Fig. 8.2
3
Marking RN1413
2021-08-30
Rev.1.0
RN1412,RN1413
9. Characteristics Curves (Note)
Fig. 9.1
RN1412 I C -V I(ON)
Fig. 9.2
RN1413 I C -V I(ON)
Fig. 9.3
RN1412 I C -V I(OFF)
Fig. 9.4
RN1413 I C -V I(OFF)
Fig. 9.5
RN1412 h FE -I C
©2021
Toshiba Electronic Devices & Storage Corporation
Fig. 9.6
4
RN1413 h FE -I C
2021-08-30
Rev.1.0
RN1412,RN1413
Fig. 9.7
Note:
RN1412 V CE(sat) -I C
Fig. 9.8
RN1413 V CE(sat) -I C
The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
©2021
Toshiba Electronic Devices & Storage Corporation
5
2021-08-30
Rev.1.0
RN1412,RN1413
Package Dimensions
Unit: mm
Weight: 12 mg (typ.)
Package Name(s)
TOSHIBA: 2-3F1S
Nickname: S-Mini
©2021
Toshiba Electronic Devices & Storage Corporation
6
2021-08-30
Rev.1.0
RN1412,RN1413
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as "TOSHIBA".
Hardware, software and systems described in this document are collectively referred to as "Product".
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE").
Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in
nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, and devices related to power plant.
IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
For details, please contact your TOSHIBA sales representative or contact us via our website.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS,
INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS
OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE,
USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
https://toshiba.semicon-storage.com/
©2021
Toshiba Electronic Devices & Storage Corporation
7
2021-08-30
Rev.1.0
