RN1414∼RN1418
TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT Process)
RN1414, RN1415, RN1416, RN1417, RN1418
Switching, Inverter Circuit, Interface Circuit
and Driver Circuit Applications
Unit: mm
z With built-in bias resistors
z Simplified circuit design
z Reduced number of parts and simplified manufacturing process
z Complementary to RN2414 to RN2418
Equivalent Circuit and Bias Resistor Values
Type No.
R1 (kΩ)
R2 (kΩ)
RN1414
1
10
RN1415
2.2
10
RN1416
4.7
10
RN1417
10
4.7
RN1418
47
10
JEDEC
TO-236MOD
JEITA
SC-59
TOSHIBA
2-3F1A
Weight: 0.012g (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
RN1414 to 1418
Junction temperature
Storage temperature range
Rating
Unit
VCBO
50
V
VCEO
50
V
RN1414
5
RN1415
6
RN1416
VEBO
7
RN1417
15
RN1418
25
Collector current
Collector power dissipation
Symbol
RN1414 to 1418
V
IC
100
mA
PC
200
mW
Tj
150
°C
Tstg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Start of commercial production
1994-08
1
2014-03-01
RN1414∼RN1418
Electrical Characteristics (Ta = 25°C)
Characteristic
Collector cut-off
current
Emitter cut-off current
DC current gain
Collector-emitter
saturation voltage
Input voltage (ON)
Input voltage (OFF)
Symbol
Test
Circuit
Min
Typ.
Max
Unit
VCB = 50V, IE = 0
―
―
100
nA
VCE = 50V, IB = 0
―
―
500
nA
RN1414
VEB = 5V, IC = 0
0.35
―
0.65
RN1415
VEB = 6V, IC = 0
0.37
―
0.71
VEB = 7V, IC = 0
0.36
―
0.68
RN1417
VEB = 15V, IC = 0
0.78
―
1.46
RN1418
VEB = 25V, IC = 0
0.33
―
0.63
50
―
―
30
―
―
―
0.1
0.3
RN1414
0.6
―
2.0
RN1415
0.7
―
2.5
0.8
―
2.5
RN1417
1.5
―
3.5
RN1418
2.5
―
10.0
RN1414
0.3
―
0.9
RN1415
0.3
―
1.0
0.3
―
1.1
RN1417
0.3
―
2.3
RN1418
0.5
―
5.7
RN1414 to 1418
ICBO
RN1414 to 1418
ICEO
RN1416
RN1414 to 16,18
RN1417
RN1414 to 1418
RN1416
RN1416
IEBO
―
―
Test Condition
hFE
―
VCE = 5V, IC = 10mA
VCE (sat)
―
IC = 5mA, IB = 0.25mA
VI (ON)
VI (OFF)
―
―
VCE = 0.2V, IC = 5mA
VCE = 5V, IC = 0.1mA
mA
V
V
V
Transition frequency
RN1414 to 1418
fT
―
VCE = 10V, IC = 5mA
―
250
―
MHz
Collector Output
capacitance
RN1414 to 1418
Cob
―
VCB = 10V, IE = 0,
f = 1MHz
―
3.0
6.0
pF
RN1414
0.7
1.0
1.3
RN1415
1.54
2.2
2.86
3.29
4.7
6.11
RN1417
7.0
10.0
13.0
RN1418
32.9
47.0
61.1
RN1414
―
0.1
―
RN1415
―
0.22
―
―
0.47
―
RN1417
―
2.13
―
RN1418
―
4.7
―
Input resistor
Resistor ratio
RN1416
RN1416
R1
R1/R2
―
―
2
―
―
kΩ
2014-03-01
RN1414∼RN1418
IC - VI (ON)
RN1414
100
COMMON EMITTER
VCE = 0.2V
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
100
10
Ta = 100°C
25
1
-25
0.1
COMMON EMITTER
VCE = 0.2V
10
Ta = 100°C
25
1
-25
0.1
0.1
1
10
0.1
1
INPUT VOLTAGE VI (ON) (V)
IC - VI (ON)
RN1416
100
COMMON EMITTER
VCE = 0.2V
10
Ta = 100°C
25
1
-25
0.1
1
10
COMMON EMITTER
VCE = 0.2V
10
Ta = 100°C
25
1
-25
0.1
INPUT VOLTAGE VI (ON) (V)
COLLECTOR CURRENT IC (mA)
IC - VI (ON)
RN1417
0.1
0.1
100
10
INPUT VOLTAGE VI (ON) (V)
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
100
IC - VI (ON)
RN1415
1
10
100
INPUT VOLTAGE VI (ON) (V)
IC - VI (ON)
RN1418
COMMON EMITTER
VCE = 0.2V
10
Ta = 100°C
25
1
-25
0.1
0.1
1
10
100
INPUT VOLTAGE VI (ON) (V)
3
2014-03-01
RN1414∼RN1418
COMMON EMITTER
VCE = 5V
1000
25
Ta = 100°C
-25
100
10
COMMON EMITTER
VCE = 5V
1000
Ta = 100°C
-25
100
0.2
0.4
0.6
0.8
1
1.2
1.4
0
0.2
INPUT VOLTAGE VI (OFF) (V)
10000
COLLECTOR CURRENT IC(μA
(uA)
）
COMMON EMITTER
VCE = 5V
1000
Ta = 100°C
25
0.4
0.6
0.8
1
1.2
1.4
INPUT VOLTAGE VI (OFF) (V)
IC - VI (OFF)
RN1416
10000
COLLECTOR CURRENT IC (μA
(uA)）
25
10
0
-25
100
IC - VI (OFF)
RN1417
COMMON EMITTER
VCE = 5V
1000
Ta = 100°C
25
-25
100
10
10
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
0.8
1.8
1.6
2
2.4
2.8
3.2
IC - VI (OFF)
RN1418
10000
1.2
INPUT VOLTAGE VI (OFF) (V)
INPUT VOLTAGE VI (OFF) (V)
COLLECTOR CURRENT IC (uA)
(μA）
IC - VI (OFF)
RN1415
10000
(μA）
COLLECTOR CURRENT IC (uA)
COLLECTOR CURRENT IC (uA)
(μA）
IC - VI (OFF)
RN1414
10000
COMMON EMITTER
VCE = 5V
1000
Ta = 100°C
25
-25
100
10
1
2
3
4
5
6
INPUT VOLTAGE VI (OFF) (V)
4
2014-03-01
RN1414∼RN1418
1000
hFE - IC
RN1414
RN1415
1000
COMMON EMITTER
VCE = 5V
DC CURRENT GAIN hFE
DC CURRENT GAIN hFE
COMMON EMITTER
VCE = 5V
Ta = 100°C
100
25
-25
10
Ta = 100°C
100
-25
25
10
1
10
100
1
10
COLLECTOR CURRENT IC (mA)
RN1416
1000
hFE - IC
1000
RN1417
DC CURRENT GAIN hFE
25
-25
hFE - IC
COMMON EMITTER
VCE = 5V
Ta = 100°C
100
100
COLLECTOR CURRENT IC (mA)
COMMON EMITTER
VCE = 5V
DC CURRENT GAIN hFE
hFE - IC
10
100
Ta = 100°C
25
-25
10
1
1
10
100
1
COLLECTOR CURRENT IC (mA)
RN1418
1000
10
100
COLLECTOR CURRENT IC (mA)
hFE - IC
DC CURRENT GAIN hFE
COMMON EMITTER
VCE = 5V
Ta = 100°C
100
25
-25
10
1
10
100
COLLECTOR CURRENT IC (mA)
5
2014-03-01
RN1414∼RN1418
RN1414
VCE(sat) - IC
COMMON EMITTER
IC / IB = 20
Ta = 100°C
0.1
-25
25
0.01
10
COLLECTOR CURRENT IC (mA)
RN1416
1
COMMON EMITTER
IC / IB = 20
Ta = 100°C
0.1
-25
100
1
VCE(sat) - IC
25
COMMON EMITTER
IC / IB = 20
Ta = 100°C
0.1
-25
25
0.01
10
COLLECTOR CURRENT IC (mA)
RN1417
1
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) ( V)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) ( V)
VCE(sat) - IC
0.01
1
100
VCE(sat) - IC
COMMON EMITTER
IC / IB = 20
Ta = 100°C
0.1
-25
25
0.01
1
10
COLLECTOR CURRENT IC (mA)
RN1418
1
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) ( V)
RN1415
1
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) ( V)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) ( V)
1
100
1
10
COLLECTOR CURRENT IC (mA)
100
VCE(sat) - IC
COMMON EMITTER
IC / IB = 20
Ta = 100°C
0.1
-25
25
0.01
1
10
COLLECTOR CURRENT IC (mA)
100
6
2014-03-01
RN1414∼RN1418
Type Name
Marking
RN1414
RN1415
RN1416
RN1417
RN1418
7
2014-03-01
RN1414∼RN1418
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
8
2014-03-01
