RN1701JE~RN1706JE
TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT Process) (Bias Resistor Built-in Transistor)
RN1701JE, RN1702JE, RN1703JE
RN1704JE, RN1705JE, RN1706JE
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications
Unit: mm
•
Two devices are incorporated into an Extreme-Super-Mini (5 pin)
package.
•
Incorporating a bias resistor into a transistor reduces parts count.
Reducing the parts count enables the manufacture of ever more compact
equipment and lowers assembly cost.
•
A wide range of resistor values is available for use in various circuit
designs.
•
Complementary to RN2701JE to RN2706JE
Equivalent Circuit and Bias Resistor Values
C
R1
R2
B
E
Type No.
R1 (kΩ)
R2 (kΩ)
RN1701JE
4.7
4.7
RN1702JE
10
10
RN1703JE
22
22
RN1704JE
47
47
RN1705JE
2.2
47
RN1706JE
4.7
47
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
RN1701JE
to 1706JE
RN1701JE
to 1704JE
RN1705JE
RN1706JE
Collector current
Collector power dissipation
Junction temperature
Storage temperature range
Note:
―
JEITA
―
2-2P1D
Weight: 0.003 g (typ.)
Symbol
Rating
Unit
VCBO
50
V
VCEO
50
V
Equivalent Circuit
(top view)
5
4
Q1
Q2
10
V
VEBO
5
1
IC
RN1701JE
to 1706JE
JEDEC
TOSHIBA
Absolute Maximum Ratings (Ta = 25°C) (Q1, Q2 common)
Characteristics
1.BASE1
(B1)
2.EMITTER
(E)
3.BASE2
(B2)
4.COLLECTOR2 (C2)
5.COLLECTOR1 (C1)
100
mA
100
mW
Tj
150
°C
Tstg
−55 to 150
°C
PC (Note 1)
2
3
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Total rating
Start of commercial production
2000-06
1
2014-03-01
RN1701JE~RN1706JE
Electrical Characteristics (Ta = 25°C) (Q1, Q2 common)
Characteristics
Collector cut-off current
Symbol
Test Condition
⎯
100
ICEO
VCE = 50 V, IB = 0
⎯
⎯
500
0.82
⎯
1.52
0.38
⎯
0.71
0.17
⎯
0.33
0.082
⎯
0.15
0.078
⎯
0.145
0.074
⎯
0.138
RN1701JE
30
⎯
⎯
RN1702JE
50
⎯
⎯
70
⎯
⎯
80
⎯
⎯
RN1705JE
80
⎯
⎯
RN1706JE
80
⎯
⎯
⎯
0.1
0.3
RN1701JE
1.1
⎯
2.0
RN1702JE
1.2
⎯
2.4
1.3
⎯
3.0
1.5
⎯
5.0
RN1705JE
0.6
⎯
1.1
RN1706JE
0.7
⎯
1.3
1.0
⎯
1.5
0.5
⎯
0.8
VCE = 10 V, IC = 5 mA
⎯
250
⎯
MHz
VCB = 10 V, IE = 0,
f = 1 MHz
⎯
3
6
pF
RN1701JE
3.29
4.7
6.11
RN1702JE
7
10
13
15.4
22
28.6
32.9
47
61.1
RN1705JE
1.54
2.2
2.86
RN1706JE
3.29
4.7
6.11
RN1701JE to RN1704JE
0.9
1.0
1.1
RN1703JE
RN1704JE
VEB = 10 V, IC = 0
IEBO
VEB = 5 V, IC = 0
RN1706JE
Input voltage (ON)
Input voltage (OFF)
Transition frequency
Collector output
capacitance
Input resistor
Resistor ratio
Unit
⎯
RN1705JE
Collector-emitter
saturation voltage
Max
VCB = 50 V, IE = 0
RN1702JE
DC current gain
Typ.
ICBO
RN1701JE to RN1706JE
RN1701JE
Emitter cut-off current
Min
RN1703JE
RN1704JE
RN1701JE to RN1706JE
RN1703JE
RN1704JE
RN1701JE to RN1704JE
RN1705JE, RN1706JE
RN1701JE to RN1706JE
RN1701JE to RN1706JE
RN1703JE
RN1704JE
RN1705JE
hFE
VCE (sat)
VI (ON)
VI (OFF)
fT
Cob
R1
R1/R2
RN1706JE
VCE = 5 V, IC = 10 mA
IC = 5 mA,
IB = 0.25 mA
VCE = 0.2 V, IC = 5 mA
VCE = 5 V, IC = 0.1 mA
⎯
⎯
mA
V
V
V
kΩ
0.0421 0.0468 0.0515
0.09
2
nA
0.1
0.11
2014-03-01
RN1701JE~RN1706JE
Q1, Q2 Common
RN1702JE
RN1704JE
RN1703JE
RN1705JE
RN1706JE
3
2014-03-01
RN1701JE~RN1706JE
Q1, Q2 Common
RN1702JE
RN1701JE
RN1703JE
RN1704JE
RN1705JE
RN1706JE
4
2014-03-01
RN1701JE~RN1706JE
RN1701JE
RN1702JE
RN1703JE
RN1704JE
RN1705JE
RN1706JE
5
2014-03-01
RN1701JE~RN1706JE
RN1702JE
RN1701JE
RN1704JE
RN1703JE
RN1705JE
RN1706JE
6
2014-03-01
RN1701JE~RN1706JE
Type Name
Marking
Type name
RN1701JE
XA
Type name
RN1702JE
XB
Type name
RN1703JE
XC
Type name
RN1704JE
XD
Type name
RN1705JE
XE
Type name
RN1706JE
XF
7
2014-03-01
RN1701JE~RN1706JE
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
8
2014-03-01
