RN1701 to RN1706
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) (Bias Resistor built-in Transistor)
RN1701, RN1702, RN1703
RN1704, RN1705, RN1706
Unit: mm
Switching, Inverter Circuit,
Interface Circuit and Driver Circuit
Including two devices in USV (ultra super mini type with 5 leads)
With built-in bias resistors.
Simplify circuit design
Reduce a quantity of parts and manufacturing process and miniaturize
equipment.
Various resistance values are available to suit various circuit designs.
Complementary to RN2701 to RN2706
Equivalent Circuit and Bias Resistor Values
USV
JEDEC
―
JEITA
―
TOSHIBA
2-2L1A
Weight: 6.2mg (typ.)
Part No.
R1 (kΩ)
R2 (kΩ)
RN1701
4.7
4.7
RN1702
10
10
RN1703
22
22
RN1704
47
47
RN1705
2.2
47
RN1706
4.7
47
Start of commercial production
1992-01
© 2019
Toshiba Electronic Devices & Storage Corporation
1
2019-10-17
RN1701 to RN1706
Absolute Maximum Ratings (Ta = 25°C) (Q1, Q2 Common)
Characteristic
Collector-base voltage
RN1701 to 1706
Collector-emitter voltage
Symbol
Rating
Unit
VCBO
50
V
VCEO
50
V
RN1701 to 1704
Emitter-base voltage
RN1705, 1706
Collector current
10
VEBO
IC
Collector power dissipation
RN1701 to 1706
Junction temperature
Storage temperature range
V
5
100
mA
P C*
200
mW
Tj
150
°C
Tstg
−55 to150
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
*: Total rating
Equivalent Circuit (Top View)
© 2019
Toshiba Electronic Devices & Storage Corporation
2
2019-10-17
RN1701 to RN1706
Electrical Characteristics (Ta = 25°C) (Q1, Q2 Common)
Characteristic
Collector cut-off current
Symbol
Test
Circuit
ICBO
―
ICEO
―
RN1701 to 1706
RN1701
―
RN1702
―
RN1703
Emitter cut-off current
RN1704
IEBO
VCB = 50 V, IE = 0 mA
―
―
100
VCE = 50 V, IB = 0 mA
―
―
500
0.82
―
1.52
0.38
―
0.71
0.17
―
0.33
0.082
―
0.15
0.078
―
0.145
0.074
―
0.138
VEB = 10 V, IC = 0 mA
VEB = 5 V, IC = 0 mA
mA
―
30
―
―
RN1702
―
50
―
―
70
―
―
80
―
―
hFE
―
VCE = 5 V, IC = 10 mA
RN1704
―
RN1705
―
80
―
―
RN1706
―
80
―
―
―
0.1
0.3
RN1701 to 1706
VCE (sat)
―
IC = 5 mA, IB = 0.25 mA
RN1701
―
1.1
―
2.0
RN1702
―
1.2
―
2.4
1.3
―
3.0
1.5
―
5.0
RN1703
VI (ON)
―
VCE = 0.2 V, IC = 5 mA
―
RN1705
―
0.6
―
1.1
RN1706
―
0.7
―
1.3
1.0
―
1.5
0.5
―
0.8
RN1701 to 1704
RN1705, 1706
RN1701 to 1706
RN1701 to 1706
VI (OFF)
fT
Cob
―
―
VCE = 5 V, IC = 0.1 mA
―
VCE = 10 V, IC = 5 mA
―
250
―
MHz
―
VCB = 10 V, IE = 0 mA
f = 1 MHz
―
3
6
pF
―
3.29
4.7
6.11
RN1702
―
7
10
13
15.4
22
28.6
32.9
47
61.1
RN1703
R1
―
―
kΩ
RN1704
―
RN1705
―
1.54
2.2
2.86
RN1706
―
3.29
4.7
6.11
RN1701 to 1704
―
0.9
1.0
1.1
RN1705
RN1706
© 2019
Toshiba Electronic Devices & Storage Corporation
R1/R2
V
V
RN1701
Input resistor
―
V
RN1704
Input voltage (OFF)
Unit
nA
RN1701
Input voltage (ON)
Resistor ratio
Max
―
RN1703
Collector output
capacitance
Typ.
RN1706
DC current gain
Transition frequency
Min
―
―
RN1705
Collector-emitter
saturation voltage
―
Test Condition
―
―
3
―
0.0421 0.0468 0.0515
0.09
0.1
―
0.11
2019-10-17
RN1701 to RN1706
(Q1, Q2 Common)
COLLECTOR CURRENT
IC (mA)
RN1701
The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
4
2019-10-17
RN1701 to RN1706
(Q1, Q2 Common)
The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
5
2019-10-17
RN1701 to RN1706
(Q1, Q2 Common)
The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
© 2019
Toshiba Electronic Devices & Storage Corporation
6
2019-10-17
RN1701 to RN1706
Part No.
Marking
Part No.(abbreviation code)
RN1701
Part No.(abbreviation code)
RN1702
Part No.(abbreviation code)
RN1703
Part No.(abbreviation code)
RN1704
Part No.(abbreviation code)
RN1705
Part No.(abbreviation code)
RN1706
© 2019
Toshiba Electronic Devices & Storage Corporation
7
2019-10-17
RN1701 to RN1706
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as “Product”.
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical
equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to
control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative or contact us via our website.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of
Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled
substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
https://toshiba.semicon-storage.com/
© 2019
Toshiba Electronic Devices & Storage Corporation
8
2019-10-17
