RN2115MFV,L3F

RN2114MFV to RN2118MFV TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)(Bias Resistor built-in Transistor) RN2114MFV, RN2115MFV, RN2116MFV RN2117MFV, RN2118MFV Unit: mm Switching Applications Inverter Circuit Applications Interface Circuit Applications Driver Circuit Applications  Ultra-small package, suited to very high density mounting  Incorporating a bias resistor into the transistor reduces the number of parts, so enabling the manufacture of ever more compact equipment and lowering assembly cost.  A wide range of resistor values is available for use in various circuits.  Complementary to the RN1114MFV to RN1118MFV Equivalent Circuit and Bias Resistor Values Type No. R1 (kΩ) R2 (kΩ) RN2114MFV 1 10 RN2115MFV 2.2 10 RN2116MFV 4.7 10 RN2117MFV 10 4.7 RN2118MFV 47 10 VESM 1.BASE 2.EMITTER 3.COLLECTOR JEDEC ― JEITA ― TOSHIBA 1-1Q1S Weight: 1.5 mg (typ.) Absolute Maximum Ratings (Ta = 25°C) Characteristic Collector-base voltage Collector-emitter voltage Emitter-base voltage RN2114MFV to RN2118MFV Symbol Rating Unit VCBO −50 V VCEO −50 V RN2114MFV −5 RN2115MFV −6 RN2116MFV VEBO RN2117MFV −15 RN2118MFV −25 Junction temperature Storage temperature range RN2114MFV to RN2118MFV V IC −100 mA PC(Note1) 150 mW Tj 150 °C Tstg −55 to 150 °C Collector current Collector power dissipation −7 Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Mounted on an FR4 board (25.4 mm × 25.4 mm × 1.6 mm) Start of commercial production 2005-02 © 2016-2019 Toshiba Electronic Devices & Storage Corporation 1 2019-01-07 RN2114MFV to RN2118MFV Land Pattern Dimensions (for reference only) unit: mm 0.5 0.45 1.15 0.4 0.45 0.4 0.4 Electrical Characteristics (Ta = 25°C) Characteristic Collector cut-off current Emitter cut-off current DC current gain Symbol Test Condition Input voltage (ON) Input voltage (OFF) Collector output capacitance Input resistor Resistor ratio Typ. Max Unit ICBO VCB = −50 V, IE = 0 A ― ― −100 ICEO VCE = −50 V, IB = 0 A ― ― −500 RN2114MFV VEB = −5 V, IC = 0 A −0.35 ― −0.65 RN2115MFV VEB = −6 V, IC = 0 A −0.37 ― −0.71 VEB = −7 V, IC = 0 A −0.36 ― −0.68 RN2117MFV VEB = −15 V, IC = 0 A −0.78 ― −1.46 RN2118MFV VEB = −25 V, IC = 0 A −0.33 ― −0.63 50 ― ― 30 ― ― ― −0.1 −0.3 RN2114MFV −0.5 ― −2.0 RN2115MFV −0.6 ― −2.5 −0.7 ― −2.5 RN2117MFV −1.5 ― −3.5 RN2118MFV −2.5 ― −10.0 RN2114MFV −0.3 ― −0.9 RN2115MFV −0.3 ― −1.0 −0.3 ― −1.1 RN2117MFV −0.3 ― −3.0 RN2118MFV −0.5 ― −5.7 ― 0.9 ― RN2114MFV 0.7 1.0 1.3 RN2115MFV 1.54 2.2 2.86 3.29 4.7 6.11 RN2117MFV 7.0 10.0 13.0 RN2118MFV 32.9 47 61.1 RN2114MFV ― 0.1 ― RN2115MFV ― 0.22 ― ― 0.47 ― RN2117MFV ― 2.13 ― RN2118MFV ― 4.7 ― RN2114MFV to 2118MFV RN2116MFV RN2114MFV to 16MFV, 18MFV IEBO hFE VCE = −5 V, IC = −10 mA RN2117MFV Collector-emitter saturation voltage Min RN2114MFV to 2118MFV RN2116MFV RN2116MFV RN2114MFV to 2118MFV RN2116MFV RN2116MFV © 2016-2019 Toshiba Electronic Devices & Storage Corporation VCE(sat) VI (ON) VI (OFF) Cob IC = −5 mA, IB = −0.5 mA VCE = −0.2 V, IC = −5 mA VCE = −5 V, IC = −0.1 mA VCB = −10 V, IE = 0 A, f = 1 MHz ― R1 ― R1/R2 2 nA mA ― V V V pF kΩ ― 2019-01-07 RN2114MFV to RN2118MFV © 2016-2019 Toshiba Electronic Devices & Storage Corporation 3 2019-01-07 RN2114MFV to RN2118MFV © 2016-2019 Toshiba Electronic Devices & Storage Corporation 4 2019-01-07 RN2114MFV to RN2118MFV 1000 1000 100 100 10 10 1000 1000 100 100 10 10 10 1000 100 10 © 2016-2019 Toshiba Electronic Devices & Storage Corporation 5 2019-01-07 RN2114MFV to RN2118MFV © 2016-2019 Toshiba Electronic Devices & Storage Corporation 6 2019-01-07 RN2114MFV to RN2118MFV Marking Type Name Marking RN2114MFV RN2115MFV RN2116MFV RN2117MFV RN2118MFV © 2016-2019 Toshiba Electronic Devices & Storage Corporation 7 2019-01-07 RN2114MFV to RN2118MFV RESTRICTIONS ON PRODUCT USE Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”. Hardware, software and systems described in this document are collectively referred to as “Product”. • TOSHIBA reserves the right to make changes to the information in this document and related Product without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative or contact us via our website. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. https://toshiba.semicon-storage.com/ © 2016-2019 Toshiba Electronic Devices & Storage Corporation 8 2019-01-07