RN2427

RN2421~RN2427 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) RN2421,RN2422,RN2423,RN2424 RN2425,RN2426,RN2427 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications l l l l l l High current type (IC(MAX) = −800mA) With built-in bias resistors Simplify circuit design Reduce a quantity of parts and manufacturing process Low VCE (sat) Complementary to RN1421~RN1427 Unit: mm Equivalent Circuit and Bias Resistor Values Type No. RN2421 RN2422 RN2423 RN2424 RN2425 RN2426 RN2427 R1 (kΩ) 1 2.2 4.7 10 0.47 1 2.2 R2 (kΩ) 1 2.2 4.7 10 10 10 10 JEDEC JEITA TOSHIBA ― SC-59 2-3F1A Weight: 0.012 g (typ.) Maximum Ratings (Ta = 25°C) Characteristics Collector-Base voltage Collector-Emitter voltage RN2421~2427 RN2421~2424 Emitter-Base voltage RN2425, 2426 RN2427 Collector current Collector power dissipation Junction temperature Storage temperature range RN2421~2427 Ic Pc Tj Tstg VEBO Symbol VCBO VCEO Rating −50 −50 −10 −5 −6 −800 200 150 −55~150 mA mW °C °C V Unit V V 1 2001-11-29 RN2421~RN2427 Electrical Characteristics (Ta = 25°C) Characteristics Collector cut-off current RN2421~2427 RN2421 RN2422 RN2423 Emitter cut-off current RN2424 RN2425 RN2426 RN2427 RN2421 RN2422 RN2423 DC current gain RN2424 RN2425 RN2426 RN2427 Collector-Emitter saturation voltage RN2421 RN2422~2427 RN2421 RN2422 RN2423 Input voltage (ON) RN2424 RN2425 RN2426 RN2427 RN2421~2424 Input voltage (OFF) Transition frequency Collector output capacitance RN2425, 2426 RN2427 RN2421~2427 RN2421~2427 RN2421 RN2422 RN2423 Input resistor RN2424 RN2425 RN2426 RN2427 RN2421~2424 Resistor ratio RN2425 RN2426 RN2427 R1/R2 R1 fT Cob VI (OFF) VI (ON) VCE (sat) hFE IEBO Symbol ICBO ICEO Test Circuit ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― VCE = −5V, IC = −0.1mA VCE = −5V, IC = −20mA VCB = −10V, IE = 0 f = 1MHz VCE = −0.2V IC = −100mA IC = −50mA, IB = −2mA IC = −50mA, IB = −1mA VCE = −1V, IC = −100mA VEB = −5V, IC = 0 VEB = −6V, IC = 0 VEB = −10V, IC = 0 Test Condition VCB = −50V, IE = 0 VCE = −50V, IB = 0 Min ― ― −3.85 −1.75 −0.82 −0.38 −0.365 −0.35 −0.378 60 65 70 90 90 90 90 ― −1.0 −1.4 −2.0 −3.0 −0.6 −0.7 −1.0 −0.8 −0.4 −0.5 ― ― 0.7 1.54 3.29 7 0.329 0.7 1.54 0.9 0.0423 0.09 0.2 Typ. ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― 200 13 1.0 2.2 4.7 10 0.47 1.0 2.2 1.0 0.047 0.1 0.22 Max −100 −500 −7.14 −3.25 −1.52 −0.71 −0.682 −0.65 −0.703 ― ― ― ― ― ― ― −0.25 −3.5 −4.5 −6.5 −12.0 −2.0 −2.5 −3.0 −1.3 −0.8 −1.0 ― ― 1.3 2.86 6.11 13 0.61 1.3 2.86 1.1 0.0517 0.11 0.24 kΩ MHz pF V V V mA Unit nA 2 2001-11-29 RN2421~RN2427 Marking Type No. Marking Type name RN2421 RA Type name RN2422 RB Type name RN2423 RC Type name RN2424 RD Type name RN2425 RE Type name RN2426 RF Type name RN2427 RG 3 2001-11-29 RN2421~RN2427 4 2001-11-29 RN2421~RN2427 5 2001-11-29 RN2421~RN2427 6 2001-11-29 RN2421~RN2427 7 2001-11-29 RN2421~RN2427 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 8 2001-11-29