RN2970FE

RN2970FE,RN2971FE TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) (Bias Resistor built-in Transistor) RN2970FE, RN2971FE Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications. • • Two devices are incorporated into an Extreme-Super-Mini (6 pin) package. Incorporating a bias resistor into a transistor reduces parts count. Reducing the parts count enable the manufacture of ever more compact equipment and save assembly cost. Complementary to RN1970FE, RN1971FE • Equivalent Circuit and Bias Resistor Values C R1 B E Maximum Ratings (Ta = 25°C) (Q1, Q2 common) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature range Symbol VCBO VCEO VEBO IC PC (Note) Tj Tstg Rating −50 −50 −5 −100 100 150 −55~150 Unit V V V mA mW °C °C 1 2 3 Q1 Q2 6 5 4 Equivalent Circuit (top view) Note: Total rating 000707EAA1 • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. • The information contained herein is subject to change without notice. 2000-12-26 1/2 RN2970FE,RN2971FE Electrical Characteristics (Ta = 25°C) (Q1, Q2 common) Characteristics Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Transition frequency Collector output capacitance Input resistor RN2970FE RN2971FE Symbol ICBO IEBO hFE VCE (sat) fT Cob R1 Test Condition VCB = −50 V, IE = 0 VEB = −5 V, IC = 0 VCE = −5 V, IC = −1 mA IC = −5 mA, IB = −0.25 mA VCE = −10 V, IC = −5 mA VCB = −10 V, IE = 0, f = 1 MHz  Min   120    3.29 7 Typ.    −0.1 200 3 4.7 10 Max −100 −100 400 −0.3  6 6.11 13 V MHz pF kΩ Unit nA nA Type Name Marking Type name RN2970FE YYK Type name RN2971FE YYM 2000-12-26 2/2