SSM3K7002BS
TOSHIBA Field-Effect Transistor Silicon N Channel MOS Type (U-MOSⅣ)
SSM3K7002BS
High-Speed Switching Applications
Analog Switch Applications
•
Small package
•
Low ON-resistance
Unit: mm
: RDS(ON) = 3.3 Ω (max) (@VGS = 4.5 V)
: RDS(ON) = 2.6 Ω (max) (@VGS = 5 V)
: RDS(ON) = 2.1 Ω (max) (@VGS = 10 V)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Drain-source voltage
VDSS
60
V
Gate-source voltage
VGSS
±20
V
DC
ID
200
Pulse
IDP
800
PD (Note 1)
200
mW
Channel temperature
Tch
150
°C
2. Source
Storage temperature range
Tstg
−55 to 150
°C
3. Drain
Drain current
Power dissipation
mA
1. Gate
JEDEC
SOT-23
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
JEITA
temperature, etc.) may cause this product to decrease in the
TOSHIBA
2-3AA1A
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
Weight: 8.0 mg (typ.)
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and
individual reliability data (i.e. reliability test report and estimated failure rate, etc).
2
Note 1: Mounted on FR4 board. (25.4 mm × 25.4 mm × 1.6 mm, Cu Pad: 645 mm )
Electrical Characteristics (Ta = 25°C)
Characteristics
Gate leakage current
Drain-source breakdown voltage
Drain cutoff current
Symbol
Forward transfer admittance
Drain-source ON-resistance
Unit
µA
±10
60
V (BR) DSX
ID = 0.1 mA, VGS = -10 V
45
Vth
Yfs
RDS (ON)
Ciss
Crss
V
VDS = 60 V, VGS = 0 V
1
µA
VDS = 10 V, ID = 0.25 mA
1.0
2.5
V
mS
VDS = 10 V, ID = 200 mA
(Note 2)
225
ID = 500 mA, VGS = 10 V
(Note 2)
1.62
2.1
ID = 100 mA, VGS = 5 V
(Note 2)
1.77
2.6
ID = 100 mA, VGS = 4.5 V
(Note 2)
1.81
3.3
17.0
1.9
3.6
2.5
5.0
18
55
-0.84
-1.2
VDS = 25 V, VGS = 0 V, f = 1 MHz
Coss
Turn-on delay time
td(on)
Turn-off delay time
td(off)
VDD = 30 V, ID = 200 mA ,
VGS = 0 to 10 V
VDSF
ID = -200 mA, VGS = 0 V
Drain-source forward voltage
Max
VGS = ± 20 V, VDS = 0 V
Reverse transfer capacitance
Switching time
Typ
ID = 0.1 mA, VGS = 0 V
IGSS
Input capacitance
Output capacitance
Min
V (BR) DSS
IDSS
Gate threshold voltage
Test Condition
(Note 2)
Ω
pF
ns
V
Note2: Pulse test
1
2010-12-10
SSM3K7002BS
Switching Time Test Circuit
10 V
(b) VIN
(a) Test circuit
90 %
OUT
10 V
10 %
IN
50 Ω
0V
0
10 µs
VDD = 30 V
Duty ≤ 1%
VIN: tr, tf < 2 ns
(Zout = 50 Ω)
Common Source
Ta = 25 °C
Marking
RL
VDD
(c) VOUT
90 %
VDD
10 %
VDS (ON)
tr
tf
td(on)
td(off)
Equivalent Circuit (top view)
3
3
NM
1
2
1
2
Precaution
Let Vth be the voltage applied between gate and source that causes the drain current (ID) to be low (0.25 mA for the
SSM3K7002BS). Then, for normal switching operation, VGS(on) must be higher than Vth, and VGS(off) must be lower
than Vth. This relationship can be expressed as: VGS(off) < Vth < VGS(on).
Take this into consideration when using the device.
Handling Precaution
When handling individual devices that are not yet mounted on a circuit board, make sure that the environment is
protected against electrostatic discharge. Operators should wear antistatic clothing, and containers and other objects that
come into direct contact with devices should be made of antistatic materials.
2
2010-12-10
SSM3K7002BS
ID – VDS
ID – VGS
1000
Common Source
Ta = 25 °C
Common Source
VDS = 10 V
5.0 V
7.0 V
4.5 V
(mA)
800
4.0 V
10 V
Drain current ID
Drain current ID
(mA)
1000
600
3.5 V
3.3 V
400
VGS = 2.5
200
2.8V
100
Ta = 100 °C
10
25 °C
1
-25 °C
0
0
0.8
0.4
1.2
1.6
Drain–source voltage VDS
0.1
0
2.0
1.0
(V)
2.0
Drain–source ON-resistance
RDS (ON) (Ω)
Drain–source ON-resistance
RDS (ON) (Ω)
4
3
4.0V
4.5 V
2
VGS = 10 V
1
5.0 V
ID = 100 mA
Common Source
Ta = 25°C
4
3
Ta = 100 °C
2
25 °C
1
-25 °C
0
30
100
Drain current ID
300
0
1000
10
RDS (ON) – Ta
Vth – Ta
Gate threshold voltage Vth (V)
Drain–source ON-resistance
RDS (ON) (Ω)
4
100 mA / 4.5 V
2
ID = 500 mA / VGS = 10 V
1
100 mA / 5.0V
0
(V)
3.0
Common Source
0
−50
20
Gate–source voltage VGS
(mA)
5
3
(V)
RDS (ON) – VGS
5
Common Source
Ta = 25°C
0
10
5.0
4.0
Gate–source voltage VGS
RDS (ON) – ID
5
3.0
50
100
Common Source
VDS = 10 V
ID = 0.25 mA
2.0
1.0
0
−50
150
Ambient temperature Ta (°C)
0
50
100
150
Ambient temperature Ta (°C)
3
2010-12-10
IDR – VDS
|Yfs| – ID
1
1000
0.3
(mA)
Common Source
VDS = 10 V
Ta = 25°C
Drain reverse current IDR
Forward transfer admittance Yfs
(S)
SSM3K7002BS
0.1
0.03
0.01
0.003
100
10
Drain current ID
1000
IDR
G
600
S
400
200
-0.2
(mA)
-0.4
-0.6
-0.8
(ns)
Switching time t
Capacitance C (pF)
30
10
5
Coss
1
0.1
Common Source
Ta = 25°C
f = 1 MHz
VGS = 0 V
(V)
Common Source
VDD = 30 V
VGS = 0 to 10 V
Ta = 25 °C
50
Ciss
-1.2
t – ID
1000
tf
3
-1.0
Drain–source voltage VDS
C – VDS
100
800
0
0
0.001
1
Common Source
VGS = 0 V
Ta = 25°C
D
td(off)
100
10
td(on)
Crss
tr
1
1
10
100
Drain–source voltage VDS
1
(V)
10
100
Drain current ID
1000
(mA)
PD – Ta
Mounted on FR4 board.
2
(25.4 mm × 25.4 mm × 1.6 mm, Cu Pad: 645 mm )
200
Drain power dissipation
PD
(mW)
250
150
100
50
0
0
40
80
120
160
Ambient temperature Ta (°C)
4
2010-12-10
SSM3K7002BS
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2010-12-10