SSM6N48FU
TOSHIBA Field Effect Transistor
Silicon N Channel MOS Type (U-MOSIII)
SSM6N48FU
Load Switching Applications
•
•
•
Unit: mm
2.5-V drive
N-ch 2-in-1
Low ON-resistance: RDS(ON) = 3.2 Ω (max) (@VGS = 4.0 V)
RDS(ON) = 5.4 Ω (max) (@VGS = 2.5 V)
Absolute Maximum Ratings (Ta = 25°C)
(Q1, Q2 Common)
Characteristics
Symbol
Rating
Unit
Drain-Source voltage
VDSS
30
V
Gate-Source voltage
VGSS
±20
V
DC
ID
100
Pulse
IDP
400
Drain current
Power dissipation
PD (Note 1)
mA
300
mW
Channel temperature
Tch
150
°C
Storage temperature range
Tstg
−55 to 150
°C
JEDEC
―
JEITA
SC-88
Using continuously under heavy loads (e.g. the application of
TOSHIBA
2-2J1C
high temperature/current/voltage and the significant change in
Weight: 6.8 mg (typ.)
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Total rating
Mounted on an FR4 board
2
(25.4 mm × 25.4 mm × 1.6 mm, Cu Pad: 0.32mm × 6)
Note:
0.8 mm
0.4 mm
Marking
6
Equivalent Circuit (top view)
5
4
6
2
4
Q1
DZ
1
5
Q2
3
1
2
3
Start of commercial production
2010-08
1
2014-03-01
SSM6N48FU
Electrical Characteristics (Ta = 25°C) (Q1, Q2 Common)
Characteristics
Symbol
Drain-Source breakdown voltage
Test Condition
V (BR) DSS
ID = 0.1 mA, VGS = 0 V
V (BR) DSX
ID = 0.1 mA, VGS = -10 V
Min
(Note 3)
Typ.
Max
30
⎯
⎯
16
⎯
⎯
Unit
V
Drain cut-off current
IDSS
VDS = 30 V, VGS = 0 V
⎯
⎯
1
μA
Gate leakage current
IGSS
VGS = ±12 V, VDS = 0 V
⎯
⎯
±1
μA
Vth
VDS = 3 V, ID = 0.1 mA
0.8
⎯
1.5
V
Forward transfer admittance
⎪Yfs⎪
VDS = 3 V, ID = 10 mA
(Note 2)
33
⎯
⎯
mS
Drain-Source ON resistance
RDS (ON)
ID = 10 mA, VGS = 4 V
(Note 2)
⎯
2.0
3.2
ID = 10 mA, VGS = 2.5 V
(Note 2)
⎯
3.0
5.4
⎯
15.1
⎯
⎯
7.8
⎯
⎯
12.4
⎯
Gate threshold voltage
Input capacitance
Ciss
Reverse transfer capacitance
Crss
Output capacitance
Coss
Switching time
VDS = 3 V, VGS = 0 V, f = 1 MHz
Turn-on time
ton
VDD = 5 V, ID = 10 mA,
⎯
35
⎯
Turn-off time
toff
VGS = 0 to 5 V, RG = 50 Ω
⎯
180
⎯
⎯
-0.83
-1.2
Drain-source forward voltage
VDSF
ID = -100 mA, VGS = 0 V
(Note 2)
Ω
pF
ns
V
Note 2: Pulse test
Note 3: If a reverse bias is applied between gate and source, this device enters V(BR)DSX mode. Note that the
drain-source breakdown voltage is lowered in this mode.
Switching Time Test Circuit
(a) Test circuit
(b) VIN
5V
OUT
5V
90%
RG
0
10 μs
RL
IN
VDD
0V
(c) VOUT
VDD = 5 V
RG= 50 Ω
Duty ≤ 1%
VIN: tr, tf < 5 ns
Common Source
Ta = 25°C
10%
VDD
VDS (ON)
90%
10%
tr
ton
tf
toff
Precaution
Vth can be expressed as voltage between gate and source when low operating current value is ID = 0.1 mA for this
product. For normal switching operation, VGS (on) requires higher voltage than Vth and VGS (off) requires lower voltage
than Vth. (Relationship can be established as follows: VGS (off) < Vth < VGS (on) )
Please take this into consideration for using the device.
Do not use this device under avalanche mode. It may cause the device to break down.
Handling Precaution
When handling individual devices (which are not yet mounting on a circuit board), be sure that the environment is
protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects
that come into direct contact with devices should be made of anti-static materials.
2
2014-03-01
SSM6N48FU
ID – VDS
ID – VGS
400
1000
3.0 V
300
100
2.7 V
ID
2.5 V
200
2.3 V
VGS = 2.1 V
100
0
Common Source
Ta = 25 °C
Pulse test
0
0.2
0.4
0.6
0.8
Drain-source voltage
VDS
10
Ta = 100 °C
Drain current
Drain current
(mA)
4.0 V
ID
(mA)
10 V
− 25 °C
1
25 °C
0.1
Common Source
VDS = 3 V
Pulse test
0.01
0
1.0
(V)
1.0
2.1 V
Drain-source ON-resistance
RDS (ON) (Ω)
Drain-source ON-resistance
RDS (ON) (Ω)
2.7 V
3.0 V
4
3
4.0 V
2
VGS = 10 V
1
Common Source
Ta = 25°C
Pulse test
200
Drain current
300
ID
5
4
Ta = 100 °C
2
1
0
400
25 °C
3
− 25 °C
0
2
Gate-source voltage
(mA)
10 m A / 4.0 V
10 m A / 10 V
2
1
0
−50
0
50
Ambient temperature
VGS
10
(V)
100
Ta
Common Source
VDS = 3 V
Vth (V)
ID = 10 m A / VGS = 2.5 V
Gate threshold voltage
Drain-source ON-resistance
RDS (ON) (Ω)
5
3
8
Vth – Ta
2.0
Common Source
Pulse test
4
6
4
RDS (ON) – Ta
6
(V)
ID = 10 mA
Common Source
Pulse test
2.3 V
100
4.0
RDS (ON) – VGS
2.5 V
0
VGS
6
5
0
3.0
Gate-source voltage
RDS (ON) – ID
6
2.0
ID = 0.1 mA
1.0
0
−50
150
(°C)
0
50
Ambient temperature
3
100
Ta
150
(°C)
2014-03-01
1000
IDR
(mA)
Common Source
VDS = 3 V
Ta = 25°C
Pulse test
100
Drain reverse current
Forward transfer admittance
IDR – VDS
|Yfs| – ID
1000
⎪Yfs⎪
(mS)
SSM6N48FU
10
1
100
10
1
Drain current
ID
100
25 °C
10
Common Source
1
S
–0.5
–1.0
Drain-source voltage
(mA)
C – VDS
VDS
–1.5
(V)
t – ID
1000
100
IDR
G
−25 °C
0.1
0
1000
VGS = 0 V
Pulse test
D
Ta =100 °C
toff
(ns)
30
tf
100
Switching time
Capacitance
C
t
(pF)
50
Ciss
10
Coss
5
Crss
Common Source
3
ton
tr
10
Common Source
VDD = 5 V
VGS = 0 to 5 V
Ta = 25 °C
RG = 50Ω
Ta = 25°C
f = 1 MHz
VGS = 0 V
1
0.1
1
10
Drain-source voltage
1
100
VDS
(V)
1
10
Drain current
100
ID
1000
(mA)
PD* – Ta
500
Power dissipation PD* (mW)
Mounted on FR4 board.
2
(25.4 mm × 25.4 mm × 1.6 mm, Cu Pad: 0.32 mm × 6)
400
300
200
100
0
0
*:Total Rating
40
80
120
160
Ambient temperature Ta (°C)
4
2014-03-01
SSM6N48FU
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
5
2014-03-01
