TA2078P

TA2078P

  • 厂商:

    TOSHIBA(东芝)

  • 封装:

  • 描述:

    TA2078P - Bipolar Linear Integrated Circuit Silicon Monolithic Preset Equalizer IC - Toshiba Semicon...

  • 详情介绍
  • 数据手册
  • 价格&库存
TA2078P 数据手册
TA2078P TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA2078P Preset Equalizer IC TA2078P is a 3 mode preset equalizer IC. This IC have built-in one middle boost and two type high/low boost equalizers and flat mode. These operation mode are controled by internal switch. Features · · Dual channel 3 mode preset equalizer 1) Middle boost 2) High/Low boost-1 3) High/Low boost-2 4) Flat (No equalizing) · · · Few external parts Dual inline package 16 pin Operating supply voltage range : VCC (opr) = 7.5~14.0 V (Ta = 25°C) Weight: 1.00 g (typ.) 1 2002-03-05 TA2078P Block Diagram 2 2002-03-05 TA2078P Maximum Ratings (Ta = 25°C) Characteristics Supply voltage Power dissipation Operating temperature Storage temperature Symbol VCC PD (Note) Topr Tstg Rating 14 750 −25~75 −55~150 Unit V mW °C °C Note: Derated above Ta = 25°C in the proportion of 6 mW/°C. Electrical Characteristics (unless otherwise specified, VCC = 10 V, Rg = 620 Ω, RL = 10 kΩ, f = 1 kHz, Normal Mode, Ta = 25°C) Characteristics Operating voltage Symbol VCC ICCQ1 Quiescent current ICCQ2 ICCQ3 ICCQ4 Voltage gain Maximum output voltage Total harmonic distortion Ripple rejection ratio Cross talk Output noise voltage GV Vom THD R.R. C.T. Vno Test Circuit ― ― ― ― ― ― ― ― ― ― ― THD = 1% Vin = 200 mVrms Vrip = 300 mVrms, frip = 100 Hz Vin = 350 mVrms Rg = 620 Ω, DIN AUDIO filter Normal mode Rock mode Classic mode Pop mode ― Test Condition ― (A = L, B = L) (A = H, B = L) (A = L, B = H) (A = H, B = H) Min 7.5 ― ― ― ― 12.0 2.5 ― ― ― ― Typ. ― 2.5 4.2 4.6 4.5 14.0 3.0 0.01 −56 −70 20 Max 14.0 5.0 9.0 9.0 9.0 16.0 ― 0.1 ― −60 30 dB Vrms % dB dB µVrms mA Unit V Control Switch Voltage Control Voltage for 10/9 pin “H” Input “L” Input 2.0 V~VCC 0~0.8 V or Open Operation Mode A (10 pin) Normal Rock Classic Pop L H L H B (9 pin) L L H H Boost Frequency Flat (No equalizing) High/Low boost-1 High/Low boost-2 Mid boost 3 2002-03-05 TA2078P Test Circuit 4 2002-03-05 TA2078P 5 2002-03-05 TA2078P Package Dimensions Weight: 1.00 g (typ.) 6 2002-03-05 TA2078P RESTRICTIONS ON PRODUCT USE 000707EBA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 7 2002-03-05
TA2078P
文档中的物料型号是SN74LS194AN,它是一款集成电路。

器件简介表明它为4位二进制计数器,常用于数字电路设计中,用于计数、分频等功能。

引脚分配如下:1-GND,2-CLK1,3-CLK2,4-MR,5-CP,6-Q0,7-Q1,8-Q2,9-Q3,10-RCO/Q4,11-Q4,12-Q3',13-Q2',14-Q1',15-Q0',16-Vcc。

参数特性包括工作电压范围为4.75V至5.25V,工作温度范围为0至70摄氏度。

功能详解说明了其作为同步4位二进制计数器的工作原理,具有清零、预置和计数使能功能。

应用信息描述了其在数字电路设计中的多种用途,如分频、计数等。

封装信息指出该器件采用双列直插式封装(DIP)。
TA2078P 价格&库存

很抱歉,暂时无法提供与“TA2078P”相匹配的价格&库存,您可以联系我们找货

免费人工找货