TA76L431S(T6SOY,AQ

TA76L431FT/S TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA76L431FT,TA76L431S 2.49V Adjustable High-Precision Shunt Regulators These devices are adjustable high-precision shunt regulators whose output voltage (VKA) can be set arbitrarily using two external resistors. The devices have a precise internal reference voltage of 2.49 V, enabling them to operate at low voltage. In addition, they can be used as zener diodes to perform temperature compensation. TA76L431FT Features • Precision reference voltage : VREF = 2.49V ± 1.0% (Ta = 25ºC) • Adjustable output voltage : VREF ≤ VOUT ≤ 19 V • SON5-P-0202-0.65C TA76L431S Minimum cathode current for regulation :Ikmin = 0.5 mA (max.) • Operating temperature: Ta = −40 to 85ºC • The TA76L431FT is housed in an ultra-thin UFV package. (thickness: 0.7 mm typ.) • Packages: UFV (TA76L431FT), LSTM (TA76L431S) Weight SON5-P-0202-0.65C : 0.007 g (typ.) SSIP3-P-1.27 : 0.36 g (typ.) 1 2011-10-11 TA76L431FT/S Pin Assignment/Marking TA76L431FT 5 TA76L431S 4 1: NC 2: ANODE (A) 3: CATHODE (K) 4: REFERENCE (REF) 5: ANODE (A) 1F 1 2 1 TA76L 2 431S 3 1: REFERENCE (REF) 2: ANODE (A) 3: CATHODE (K) Note Lot No 3 Note: A line under a Lot No. identifies the indication of product Labels. Not underlined: [[Pb]]/INCLUDES > MCV Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. How to Order Product No. TA76L431FT (TE85L,F Package Type UFV (surface-mount type) TA76L431S(Q) TA76L431S (TPE6,Q) Packing Type and Capacity Embossed tape: 3000 pcs/reel LSTM Loose in bag: 200 pcs/bag (lead type) Radial tape: 2000 pcs/pack Note: The lead pitch for the TA76L431S(Q) and TA76L431S(TPE6,Q) may vary. Functional Block Diagram Circuit Symbol Cathode (K) Cathode (K) Reference (REF) Reference (REF) 2.49V Anode (A) Anode (A) 2 2011-10-11 TA76L431FT/S Typical Application Circuits (1) 2.49 V Reference (VKA = VREF) (2) Shunt regulator (VKA > VREF) VIN VIN VOUT R1 VOUT = 2.49 V R2 VREF ⎛ R ⎞ VOUT = VREF ⎜⎜ 1 + 1 ⎟⎟ + IREF ⋅ R1 R2 ⎠ ⎝ Usage Precautions 1. TA76L431FT, TA76L431S These products contain MOS elements. Please take care to avoid generating static electricity when handling these devices. 2. TA76L431FT, TA76L431S The oscillation frequency of these devices is determined by the value of the capacitor connected between the anode and the cathode. When establishing maximum operating condition parameters, please derate the absolute maximum rating values specified in these datasheets so as to allow an operational safety margin. Use of a laminated ceramic capacitor is recommended 3. Precautions when handling anode pin of TA76L431FT Pin 2 and pin 5 should normally be shorted together. If only pin 5 is used, pin 2 should either be left open or always kept at a lower potential than pin 5. Do not leave pin 5 open and use pin 2 only. Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Cathode voltage VKA 20 V Cathode current IK 50 mA Cathode-anode reverse current −IK 50 mA Reference voltage VREF 7 V Reference current IREF 50 μA Reference-anode reverse current −IREF 10 mA Power dissipation Thermal resistance TA76L431FT TA76L431S TA76L431FT TA76L431S PD Rth 0.45 (Note 1) 0.8 277 (Note 1) 156 W ºC/W Topr −40 to 85 ºC Junction temperature Tj 150 ºC Storage temperature Tstg −55 to 150 ºC Operating temperature 2 Note 1: Glass epoxy substrate mounting: 30 mm × 30 mm × 0.8 mmt (Cu pad area 35 mm ) Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 3 2011-10-11 TA76L431FT/S Operating Ranges Characteristics Symbol Min Typ. Max Unit Cathode voltage VKA VREF ⎯ 19 V Cathode current IK 0.5 ⎯ 40 mA −40 ⎯ 85 °C Operating temperature Topr Electrical Characteristics (Unless otherwise specified, Ta = 25°C, IK = 10 mA) Characteristics Symbol Reference voltage Test Condition VREF (dev) Ratio of change in reference input voltage to the change in cathode voltage ΔVREF/ΔV Reference Input current IREF Deviation of reference input current over temperature Typ. Max Unit 2.465 2.49 2.515 V 0°C < = Ta < = 70°C, VKA = VREF ⎯ 5 15 mV VREF < = VKA < = 10 V ⎯ 0.8 2.4 10V < = VKA < = 19 V ⎯ 0.8 2.0 VKA = VREF ⎯ 0.6 3 μA 0°C < = Ta < = 70°C, VKA = VREF, R1 = 10 kΩ, R2 = ∞ ⎯ 0.3 1.2 μA VKA = VREF VREF Deviation of reference input voltage over temperature Min IREF (dev) mV/V Minimum cathode current for regulation IKmin VKA = VREF ⎯ 0.2 0.5 mA Off-State cathode current IKoff VKA = 19 V, VREF = 0 V ⎯ ⎯ 1.0 μA ⎪ZKA⎪ VKA = VREF, f < = 1 kHz, 0.5 mA < = IK < = 40 mA ⎯ 0.2 0.5 Ω Dynamic impedance The deviation parameters VREF (dev) and IREF (dev) are defined as the maximum variation of the VREF and IREF over the rated temperature range(Ta=0 to 70ºC). The average temperature coefficient of the VREF is defined as: VREF max 6 ⎛V ⎜ REF (dev) × 10 ⎜⎜ V REF @25°C αVREF = ⎝ ΔTa VREF (dev) min ⎞ ⎟ ⎟⎟ ⎠ (ppm °C ) ΔTa Application Circuit Example Error amplification circuit for switching power supply Photocoupler VOUT GND Shunt regulator This circuit amplifies the difference between the switching power supply’s secondary output voltage and the shunt regulator’s reference voltage. It then feeds the amplified voltage back to the primary input voltage via the photocoupler. 4 2011-10-11 TA76L431FT/S PDmax – Ta Mounted on glass epoxy substate : 30 × 30 × 0.8 mm t 0.5 Cupper pad area: 35 mm2 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 TA76L431S (W) TA76L431FT PDmax – Ta 1.0 Allowable power dissipation PDmax Allowable power dissipation PDmax (W) 0.6 0.8 0.6 0.4 0.2 0 160 0 20 Ambient temperature Ta (°C) 40 VKA Input 140 160 VKA (μA) IK IK 400 VKA = VREF IK VKA = VREF Cathode current IK (mA) 120 600 Input Cathode current 100 IK – VKA IK – VKA 0 −20 85°C IK min 200 85°C Ta = −40°C 0 85°C 25°C Ta = −40°C 25°C Ta = −40°C −50 −1.0 0 1.0 Cathode voltage 2.0 VKA −200 −1.0 3.0 −0 (V) 2.47 2.47 50 50 (V) 100 100 150 Ambient temperature Ta (°C) -10 Input −20 VREF VKA R1 IKIK R2 Change in reference voltage ΔVREF (mV) VV REF REF 00 VKA 3.0 0 VV KA KA 2.49 2.49 2.45 2.45 −50 −50 2.0 1.0 ΔVREF – VKA VV KA REF KA= =VV REF Input Inpu IKIK= =1010mA mA 2.51 2.51 25°C Cathode voltage VREF – Ta 2.53 2.53 Reference voltage VREF (V) 80 Ambient temperature Ta (°C) 50 20 60 −30 0 IK IK = 10 mA Ta = 25°C 5 10 Cathode voltage 5 15 VKA 20 25 (V) 2011-10-11 TA76L431FT/S IREF – Ta ZKA – f 1.0 100 220 Ω eo 0.4 Input VKA IK 0.2 IREF ZKA (Ω) 0.6 30 Dynamic impedance 0.8 10kΩ Reference current IREF (μA) 50 5 IK eo = RS RS ＞ ZKA eo = 10 ei ・ZKA RS + ZKA ei ei ・ZKA RS e ∴ ZKA = o ・RS ei GND 3 Ta = 25°C VKA = VREF 0.5 mA ≤ IK ≤ 50mA 1 0.5 0.3 IK = 10 mA 0 −50 0 50 100 0.1 1k 150 10 k Ambient temperature Ta (°C) 100 k Frequency f AV – f 10 M 1M (Hz) Pulse response Input monitor 0 GND IK = 10 mA Ta = 25°C 30 Input 5 20 220 Ω Output Pulse 50 Ω 40 VOUT Voltage swing (Ｖ) 10 kΩ VIN IK 220 Ω 10 kΩ 10 μF 50 Generator f = 100 kHz GND 3 2 Output 1 10 0 0 1k 10 k 100 k Frequency f 1M 10 M 0 1 2 (Hz) 3 4 5 6 Time t (μs) Stability boundaty conditions IK 40 CL IK (mA) 50 Cathode current Open loop voltage gain AV (dB) 60 30 Unstable Ta = 25°C Stable VKA = VREF(2.49V) to 15V 20 10 0 0.0001 0.001 0.01 0.1 1 10 100 Load capacitance CL (μF) 6 2011-10-11 TA76L431FT/S Package Dimensions SON5-P-0202-0.65C TA76L431FT (UFV) Weight: 0.007 g (typ.) 7 2011-10-11 TA76L431FT/S Package Dimensions Unit : mm TA76L431S (LSTM) Weight: 0.36 g (typ.) 8 2011-10-11 TA76L431FT/S RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS. • Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 9 2011-10-11