TB62709F

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Intelligent, Constant Current, 7 segment LED numeric display decoder/driver. For use with common anode configuration numeric displays. The TB62709N/F is an intelligent Constant Current LED display driver designed specifically for seven segment LED display applications. The stand alone device includes all of the decode, multiplex and driver circuitry necessary to control up to four seven segment LED digits. All of the information required to program up to four LED digits is input serially including a 16 step brightness control. Expansion beyond four digits is possible with a cascade connection to a second device. The device automatically refreshes and maintains the displayed information. TB62709N SDIP24-P-300-1.78 Weight: 1.62g (Typ.) TB62709F Features • • • • • • • • Constant Current segment drivers for consistent display brightness. Single device saves labor and board space. Internal character set simplifies design efforts. Automatically handles multiplex and display refresh tasks. 16 step programmable brightness control. Single device controls up to four digits. Available in thru hole and surface mount packages. Data out cascade port for expansion beyond four digits. SSOP24-P-300-1.00 Weight: 0.32g (Typ.) Performance Characteristics VDD = 4.5V~5.5V Digit enable: 17V / 400mA Segment select: 17V / 0-40mA Max transition frequency: 15Mhz marktech optoelectronics For up-to-date product info visit our web site at www.marktechopto.com 120 Broadway • Menands, New York 12204 Toll Free: (800) 98-4LEDS • Fax: (518) 432-7454 All specifications subject to change. 584 TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Block Diagram: Maximum Ratings: C HAR AC TERISTIC S Supply Voltage LED Supply Voltage Source Output C urrent D igit 0~3 Segment D rive C urrent Segment a~D P Output C urrent Input Voltage C lock Frequency Total Output C urrent SYMBOL VD D VC C ID IG IOUT IOH/IOL VIN FC LK IVD D R ATIN G 7.0 17 -400 50 +/- 5 -0.3 ~ VD D ~+0.3 15 400 TB62709N: 1.78 Power D issipation PD TB62709F: 0.62 Operation Temperature Storage Temperature Topr Tstg -40 ~ +85 -55 ~+150 °C °C W U NIT volts volts mA mA mA volts MHz mA marktech optoelectronics For up-to-date product info visit our web site at www.marktechopto.com 120 Broadway • Menands, New York 12204 Toll Free: (800) 98-4LEDS • Fax: (518) 432-7454 All specifications subject to change. 585 TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Recommended Operating Conditions: CHARACTERISTICS SYMBOL TEST CIRCUIT CONDITION MIN. TYP. MAX. UNIT Output Stage Supply Current ICC1 1 Set normal operation mode, Rext=760Ω, Out a~DP, all ON VCC = 5V, Ta=25°C Set normal operation mode, Rext=760Ω, Out a~DP, all ON VCC = 5V, Ta=25°C Normal operation mode, VDD=4.5 - 5.5V Normal operation mode, VDD=4.5 - 5.5V All off mode, VCC=17V All off mode, VCC=17V Normal operation mode IDIG = 320mA — 300 — mA ICC2 1 — 320 — mA Digit 0~3 Scanning Freq. Out a~DP Output Current Digit 0~3 Leakage Current Out a~DP Leakage Current Digit 0~3 Output Voltage Logic fOSC ISEG ILEAK1 ILEAK2 VOUT 2 3 4 4 5 240 29 — — 3.0 480 34 — — — 960 40 -20 20 — Hz mA µA µA V IDD1 Supply Current IDD2 Operating Supply Current High Level Input Current Low Level Output Current High Level Output Voltage VOH2 VOL1 Low Level Output Voltage VOL2 Clock Frequency FCLK IDD3 IIH IIL VOH1 6 6 6 — — 6 6 6 6 6 Standby Mode, Ta=25°C Blank Mode, Ta=25°C Normal operating mode fCLK=10MHz, Ta=25°C Data-in:output a~DP on Data-in, Load&Clock VIN=5V Data-in, Load&Clock VIN=0V Data out, IOH=-1mA Data-out, IOH=-1µA Data out, IOH=-1mA Data-out, IOH=-1µA CASCADE connected, TA = -40 ~ 85ºC — — — — — 4.6 — — — 10 — — — — — — VDD — 0.1 — 200 12.5 20.5 1 -1 — — 0.4 — — µA mA mA µA µA V V V V MHz marktech optoelectronics For up-to-date product info visit our web site at www.marktechopto.com 120 Broadway • Menands, New York 12204 Toll Free: (800) 98-4LEDS • Fax: (518) 432-7454 All specifications subject to change. 586 TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Switching Characteristics: CHARACTERISTICS Data Hold Time (D-IN Clock) Data Set-up Time (D-IN Clock) Propagation Delay (Clock D-OUT) tPLH-SO High Level Pulse Width Of Clock Low Level Pulse Width Of Clock Pulse Width Of Load Setup Time (Clock-Load) Setup Time (Load-Clock) Out a ~ DP Propagation Delay (Load-Outn) Out a ~ DP Rise Time (OUTn) Out a ~ DP Fall Time (OUTn) Digit 0 ~ 3 Propagation Delay (Load-DIGn) Digit 0 ~ 3 Rise Time (DIGn) Digit 0 ~ 3 Fall Time (DIGn) tCLKH tCLKL tw LD tCLK-LD tLD-CLK tpHL-SEG tpLH-SEG trSEG tfSEG tpHL-DIG tpLH-DIG trDIG tfDIG CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf — — — — — — — — 0.2 0.2 — — 0.4 0.4 25 30 30 100 50 50 — — 1.0 1.0 — — 2.0 2.0 — — — — — — 5.0 5.0 — — 10.0 10.0 — — ns ns ns ns ns ns ns ns µs µs µs µs µs µs SYMBOL tDHO tDST tPHL-SO CL=10pf CONDITION MIN. — — — TYP. 10 20 25 MAX. — — — UNIT ns ns ns marktech optoelectronics For up-to-date product info visit our web site at www.marktechopto.com 120 Broadway • Menands, New York 12204 Toll Free: (800) 98-4LEDS • Fax: (518) 432-7454 All specifications subject to change. 587 TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Recommended Operating Conditions: CHARACTERISTICS SYMBOL CONDITION MIN. TYP. MAX. UNIT Output Stage Supply Voltage Digit 0~3 Output Current Out a~DP Output Current Logic Supply Voltage High Level Input Current Low Level Input Current High Level Input Voltage Low Level Input Voltage Switching Condition Data Hold Time (D-IN Clock) Data Setup Time (D-IN Clock) Propagation Delay (Clock D-Out) High Level Pulse Width Of Clock Low Level Pulse Width Of Clock Pulse Width Of Load Setup Time (Clock-Load) Setup Time (Load-Clock) tDHO tDST tPDSO tCLKH tCLKL twLD tCKLD tLDCLK CL=10pf 30 50 50 30 30 150 100 100 — — — — — — — — — — — — — — — — ns ns ns ns ns ns ns ns VDD IIH IIL VIH VIL Data-In, Load&Clock,VIN=VDD Data-In, Load&Clock,VIN=0V 4.5 — — 0.7 VDD — — — — — — 5.5 1 -1 — 0.3 VDD V µA µA V V VCC IDIG ISEG VOUT=3.0V VCE=0.7V 4.0 — — — — — 6.0 -320 40 V mA mA marktech optoelectronics For up-to-date product info visit our web site at www.marktechopto.com 120 Broadway • Menands, New York 12204 Toll Free: (800) 98-4LEDS • Fax: (518) 432-7454 All specifications subject to change. 588 TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Terminal Description: PIN No. 1 2 3 4 5-12 13 14 15 6,17,19,2 18 21 22 23 24 NAME VDD Serial Data IN (SI) Clock (CK) Load (LD) OUT a~DP P-GND Test In 2 Test In 1 Digit 0~3 VCC P-GND Rext Data Out (DO) L-GND Logic Supply Voltage Serial Data Input To Shift Register Clock Input Terminal Load Input Terminal Output Terminal to Cathodes of Seven Segment Display Power Ground Terminal Test Terminal - Grounded During Normal Operation Test Terminal - Grounded During Normal Operation Output Terminal to Anodes of Seven Segment Display Supply Voltage For LEDs Power Ground Terminal Constant Current Programming Terminal Cascade Connection To Next Display Stage Logic Ground Terminal FUNCTION Timing Diagram: marktech optoelectronics For up-to-date product info visit our web site at www.marktechopto.com 120 Broadway • Menands, New York 12204 Toll Free: (800) 98-4LEDS • Fax: (518) 432-7454 All specifications subject to change. 589 TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Data Input Data is input on the SERIAL-IN terminal. Each 16 bit serial word includes an address (D15 ~ D8) and data (D7 ~ D0). A low to high transition load command on the LOAD terminal loads the data into the appropriate registers following the 16th clock pulse. Operation Serial data is input on the DATA-IN terminal beginning with the most significant bit (MSB). Data is clocked through the 16 bit shift register on the rising edge of the clock. A Low to High transition on the LOAD input following the 16th (LSB) bit latches the 16 bit word into the 16 bit D-type latch. Expansion beyond four digits is possible through the use of a cascade connection from the DATA-OUT terminal. The data-out lags data-in by one bit through the data-out terminal. Each 16 bit word typically includes 8 address bits and 8 data bits. The first four data bits, beginning with D15 (MSB) ~ D12 select the Action mode (see figure 1). These global commands determine the overall function the device is to perform and includes Blank, Normal Operation, Load Register, All On and Stand-by. Data bits D11~D8 select the particular register to be loaded (see figure 2) should the load register function be selected. Data bits D7~D0 (LSB) define the specific commands required to program the display and define the brightness setting (duty cycle). Figure 1. Action Mode REGISTER DATA FUNCTION Blank (OUTn & Digit 0~3 All Off) Normal Operation Load Register (Duty, Decode, Digit & Data) All On (OUTn ALL On) Stand-By D15 D14 D13 D12 D11~D8 D7~D4 D3~D0 Hex Code INITIAL STATE 0 0 0 0 — — — 0 --- H ⇐ 0 0 0 1 — — — 1--- H 0 0 1 0 X X X 2 xxx H 0 0 0 1 1 0 1 0 — — — — — — 3 --- H 4 --- H “x” indicates that data is required in this field to execute the function. “-” indicates that data in this field is not required and not recognized. marktech optoelectronics For up-to-date product info visit our web site at www.marktechopto.com 120 Broadway • Menands, New York 12204 Toll Free: (800) 98-4LEDS • Fax: (518) 432-7454 All specifications subject to change. 590 TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62709N/F Action Mode 1. Blank - Constant current segment drivers are off resulting in an all segments off condition. Data D15 ~ D12 are 0. D11~D0 are not relevent in blank mode. 2. Normal (Operation) - Instructs device to display data loaded during previous steps. D11~ D0 are not relevent in the Normal Operation mode. 3. Load Register - Directs the device to recognize and load D11~ D0. In this mode D11 ~ D8 determines the specific register to be loaded (see figure 2) and D7 ~ D0 serves as the actual data to be loaded for programming the brightness (duty cycle) or the particular digit. 4. All On - All constant current segment drivers are on resulting in an all segments illuminated condition. D11 ~ D0 are not relevent in this mode. 5. Stand By - All display segments off condition. The Stand-By command turns off all internal bias currents and serves as a low power consumption mode (