TC74LVX240FTEL

TC74LVX240,244F/FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74LVX240F, TC74LVX240FT TC74LVX244F, TC74LVX244FT Octal Bus Buffer TC74LVX240 Inverted, 3-State Outputs TC74LVX244 Non-Inverted, 3-State Outputs The TC74LVX240,244F/ FT is a high-speed CMOS OCTAL BUS BUFFER fabricated using silicon gate CMOS technology. Designed for use in 3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. This device is suitable for low-voltage and battery operated systems. The TC74LVX240 is an inverting 3-state buffer while the TC74LVX244 is non-inverting. Both devices have two active-low output enables. These devices are designed to be used in such applications as 3-state memory address drivers. An input protection circuit ensures that 0 to 5.5V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages. Features • High-speed: tpd = 4.7 ns (typ.) (VCC = 3.3 V) • Low power dissipation: ICC = 4 μA (max) (Ta = 25°C) • Input voltage level: VIL = 0.8 V (max) (VCC = 3 V) TC74LVX240F, TC74LVX244F TC74LVX240FT, TC74LVX244FT Weight SOP20-P-300-1.27A TSSOP20-P-0044-0.65A : 0.22 g (typ.) : 0.08 g (typ.) VIH = 2.0 V (min) (VCC = 3 V) • • Power-down protection provided on all inputs Balanced propagation delays: tpLH ∼ − tpHL • Low niose: VOLP = 0.8 V (max) • Pin and function compatible with 74HC240/244 Start of commercial production 1993-01 1 2014-03-01 TC74LVX240,244F/FT Pin Assignment (top view) TC74LVX240 TC74LVX244 1G 1 20 VCC 1G 1 20 VCC 1A1 2 19 2G 1A1 2 19 2G 2Y 4 3 18 1Y1 2Y4 3 18 1Y1 1A2 4 17 2A4 1A2 4 17 2A4 2Y3 5 16 1Y 2 2Y3 5 16 1Y2 1A3 6 15 2A3 1A3 6 15 2A3 2Y2 7 14 1Y 3 2Y2 7 14 1Y3 1A4 8 13 2A2 1A4 8 13 2A2 2 Y1 9 12 1Y 4 2Y1 9 12 1Y4 GND 10 11 2A1 GND 10 11 2A1 IEC Logic Symbol 1G 1A1 1A2 1A3 1A4 2G 2A1 2A2 2A3 2A4 (1) TC74LVX240 EN 1G (2) (4) (6) (18) (16) (14) (12) (8) (19) 1Y1 1Y 2 1A1 1A2 1Y 3 1Y 4 1A3 1A4 EN 2G (11) (13) (15) (17) (9) (7) (5) (3) 2A1 2A2 2A3 2A4 2 Y1 2Y2 2Y3 2Y 4 (1) TC74LVX244 EN (2) (4) (6) (18) (16) (14) (12) (8) (19) (11) (13) (15) (17) 1Y1 1Y2 1Y3 1Y4 EN (9) (7) (5) (3) 2Y1 2Y2 2Y3 2Y4 Truth Table Inputs Outputs G An Yn (244) Y n ( 240 ) L L L H L H H L H X Z Z X: Don’t care Z: High impedance 2 2014-03-01 TC74LVX240,244F/FT Absolute Maximum Ratings (Note) Characteristics Symbol Rating Unit Supply voltage range VCC −0.5 to 7.0 V DC input voltage VIN −0.5 to 7.0 V VOUT −0.5 to VCC + 0.5 V Input diode current IIK −20 mA Output diode current IOK ±20 mA DC output current IOUT ±25 mA DC VCC/ground current ICC ±75 mA Power dissipation PD 180 mW Storage temperature Tstg −65 to 150 °C DC output voltage Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Operating Ranges (Note) Characteristics Symbol Rating Unit Supply voltage VCC 2.0 to 3.6 V Input voltage VIN 0 to 5.5 V VOUT 0 to VCC V Operating temperature Topr −40 to 85 °C Input rise and fall time dt/dv 0 to 100 ns/V Output voltage Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. 3 2014-03-01 TC74LVX240,244F/FT Electrical Characteristics DC Characteristics Characteristics H-level Symbol VIH ⎯ Input voltage L-level H-level VIL VOH Output voltage ⎯ IOH = −50 μA VIN = VIH IOH = −50 μA or VIL IOH = −4 mA IOL = 50 μA L-level VOL Ta = −40 to 85°C Ta = 25°C Test Condition VIN = VIH IOL = 50 μA or VIL IOL = 4 mA VCC (V) Min Typ. Max Min Max 2.0 1.5 ⎯ ⎯ 1.5 ⎯ 3.0 2.0 ⎯ ⎯ 2.0 ⎯ 3.6 2.4 ⎯ ⎯ 2.4 ⎯ 2.0 ⎯ ⎯ 0.5 ⎯ 0.5 3.0 ⎯ ⎯ 0.8 ⎯ 0.8 3.6 ⎯ ⎯ 0.8 ⎯ 0.8 2.0 1.9 2.0 ⎯ 1.9 ⎯ 3.0 2.9 3.0 ⎯ 2.9 ⎯ 3.0 2.58 ⎯ ⎯ 2.48 ⎯ 2.0 ⎯ 0 0.1 ⎯ 0.1 3.0 ⎯ 0 0.1 ⎯ 0.1 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 Unit V V 3-State output Off-state current IOZ VIN = VIH or VIL VOUT = VCC or GND 3.6 ⎯ ⎯ ±0.25 ⎯ ±2.5 μA Input leakage current IIN VIN = 5.5 V or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA Quiescent supply current ICC VIN = VCC or GND 3.6 ⎯ ⎯ 4.0 ⎯ 40.0 μA 4 2014-03-01 TC74LVX240,244F/FT AC Characteristics (input: tr = tf = 3 ns) Characteristics Symbol VCC (V) Propagation delay time (TC74LVX240) Propagation delay time (TC74LVX244) Min Typ. Max Min Max 15 ⎯ 5.7 10.1 1.0 12.5 50 ⎯ 8.2 13.6 1.0 16.0 15 ⎯ 4.3 6.2 1.0 7.5 50 ⎯ 6.8 9.7 1.0 11.0 15 ⎯ 6.1 11.4 1.0 13.5 50 ⎯ 8.6 14.9 1.0 17.0 15 ⎯ 4.7 7.1 1.0 8.5 50 ⎯ 7.2 10.6 1.0 12.0 15 ⎯ 7.1 13.8 1.0 16.5 50 ⎯ 9.6 17.3 1.0 20.0 15 ⎯ 5.5 8.8 1.0 10.5 50 ⎯ 8.0 12.3 1.0 14.0 2.7 50 ⎯ 11.6 16.0 1.0 19.0 3.3 ± 0.3 50 ⎯ 9.7 11.4 1.0 13.0 2.7 50 ⎯ ⎯ 1.5 ⎯ 1.5 3.3 ± 0.3 50 ⎯ ⎯ 1.5 ⎯ 1.5 (Note 2) ⎯ 4 10 ⎯ 10 pF ⎯ 6 ⎯ ⎯ ⎯ pF TC74LVX240 ⎯ 17 ⎯ ⎯ ⎯ TC74LVX244 ⎯ 19 ⎯ ⎯ ⎯ 2.7 ⎯ tpHL 3.3 ± 0.3 tpLH 2.7 ⎯ tpHL 3.3 ± 0.3 tpZL 2.7 RL = 1 kΩ 3.3 ± 0.3 tpZH Output disable time Output to output skew Input capacitance Output capacitance Power dissipation capacitance (Note 3) tpLZ tpHZ RL = 1 kΩ tosLH (Note 1) tosHL CIN ⎯ COUT CPD Unit CL (pF) tpLH Output enable time Ta = −40 to 85°C Ta = 25°C Test Condition ns ns ns ns ns pF Note 1: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) Note 2: Parameter guaranteed by design. Note 3: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC/8 (per bit) 5 2014-03-01 TC74LVX240,244F/FT Noise Characteristics (Ta = 25°C, input: tr = tf = 3 ns, CL = 50 pF) Characteristics Typ. Limit Unit 3.3 0.5 0.8 V ⎯ 3.3 −0.5 −0.8 V VIHD ⎯ 3.3 ⎯ 2.0 V VILD ⎯ 3.3 ⎯ 0.8 V Symbol Test Condition Quiet output maximum dynamic VOL VOLP ⎯ Quiet output minimum dynamic VOL VOLV Minimum high level dynamic input voltage VIH Maximum low level dynamic input voltage VIL VCC (V) Input Equivalent Circuit INPUT 6 2014-03-01 TC74LVX240,244F/FT Package Dimensions Weight: 0.22 g (typ.) 7 2014-03-01 TC74LVX240,244F/FT Package Dimensions Weight: 0.08 g (typ.) 8 2014-03-01 TC74LVX240,244F/FT RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 9 2014-03-01