TC74VCX257FT/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VCX257FT, TC74VCX257FK
Low Voltage Quad 2-Channel Multiplexer with 3.6 V Tolerant Inputs and Outputs
The TC74VCX257 is a high performance CMOS multiplexer which is guaranteed to operate from 1.2-V to 3.6-V. Designed for use in 1.5 V, 1.8 V, 2.5 V or 3.3 V systems, it achieves high speed operation while maintaining the CMOS low power dissipation. It is also designed with over voltage tolerant inputs and outputs up to 3.6 V. It consists of four 2-input digital multiplexers with common SELECT and OUTPUTENABLE ( OE ). If OE is set high the outputs are held in a high-impedance state. The SELECT decoding determines whether the A or B inputs get routed to their corresponding Y outputs. All inputs are equipped with protection circuits against static discharge.
TC74VCX257FT
TC74VCX257FK
Features
• • Low voltage operation: VCC = 1.2~3.6 V High speed operation: tpd = 3.0 ns (max) (VCC = 3.0~3.6 V) tpd = 4.0 ns (max) (VCC = 2.3~2.7 V) tpd = 8.0 ns (max) (VCC = 1.65~1.95 V) tpd = 16.0 ns (max) (VCC = 1.4~1.6 V) tpd = 40.0 ns (max) (VCC = 1.2 V) • • 3.6 V tolerant inputs and outputs. Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V) IOH/IOL = ±18 mA (min) (VCC = 2.3 V) IOH/IOL = ±6 mA (min) (VCC = 1.65 V) IOH/IOL = ±2 mA (min) (VCC = 1.4 V) • • • • Latch-up performance: −300 mA ESD performance: Machine model ≥ ±200 V Human body model ≥ ±2000 V Package: TSSOP and VSSOP (US) Power down protection is provided on all inputs and outputs. Weight TSSOP16-P-0044-0.65A VSSOP16-P-0030-0.50 : 0.06 g (typ.) : 0.02 g (typ.)
1
2007-10-19
TC74VCX257FT/FK
Pin Assignment (top view) IEC Logic Symbol
(15) (1) (2) (3) (5) (6) (11) (10) (14) (13)
SELECT 1A 1B 1Y 2A 2B 2Y GND
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
VCC OE 4A 4B 4Y 3A 3B 3Y
OE
SELECT 1A 1B 2A 2B 3A 3B 4A 4B
EN G1
1 1 MUX (4) (7) (9) (12)
1Y
2Y 3Y 4Y
Truth Table
Inputs Outputs
OE H L L L L
SELECT X L L H H
A X L H X X
B X X X L H
Y Z L H L H
X: Don’t care Z: High impedance
System Diagram
SELECT 1
1A 1B
2 3 4 1Y
2A 5 6 2B 3A 3B 4A 4B 11 10 14 13
7
2Y
9
3Y
12
4Y
OE
15
2
2007-10-19
TC74VCX257FT/FK
Absolute Maximum Ratings (Note 1)
Characteristics Power supply voltage DC input voltage DC output voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT PD ICC/IGND Tstg Rating
−0.5~4.6 −0.5~4.6 −0.5~4.6
Unit V V (Note 2) V mA (Note 4) mA mA mW mA °C
−0.5~VCC + 0.5 (Note 3) −50 ±50 ±50
180
±100 −65~150
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Off-state Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC
Operating Ranges (Note 1)
Characteristics Supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 1.2~3.6
−0.3~3.6
Unit V V (Note 2) (Note 3) (Note 4) (Note 5) (Note 6) (Note 7) °C (Note 8) ns/V mA V
0~3.6 0~VCC
±24
Output current
IOH/IOL
±18 ±6 ±2
Operating temperature Input rise and fall time
Topr dt/dv
−40~85
0~10
Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: Off-state Note 3: High or low state Note 4: VCC = 3.0~3.6 V Note 5: VCC = 2.3~2.7 V Note 6: VCC = 1.65~1.95 V Note 7: VCC = 1.4~1.6 V Note 8: VIN = 0.8~2.0 V, VCC = 3.0 V
3
2007-10-19
TC74VCX257FT/FK
Electrical Characteristics
< DC Characteristics (Ta = −40~85°C, 2.7 V < VCC = 3.6 V)
Characteristics High level Low level Symbol VIH VIL Test Condition
⎯ ⎯
VCC (V) 2.7~3.6 2.7~3.6 2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7~3.6 0 2.7~3.6 2.7~3.6 2.7~3.6
Min 2.0
⎯
Max
⎯
Unit
Input voltage
0.8
⎯ ⎯ ⎯ ⎯
V
IOH = −100 μA High level VOH VIN = VIH or VIL IOH = −12 mA IOH = −18 mA Output voltage IOH = −24 mA IOL = 100 μA Low level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA IOL = 24 mA Input leakage current 3-state output off-state current Power off leakage current Quiescent supply current Increase in ICC per input IIN IOZ IOFF ICC
ΔICC
VCC − 0.2 2.2 2.4 2.2
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
V
0.2 0.4 0.4 0.55
±5.0 ±10.0 μA μA μA
VIN = 0~3.6 V VIN = VIH or VIL VOUT = 0~3.6 V VIN, VOUT = 0~3.6 V VIN = VCC or GND VCC < (VIN, VOUT) < 3.6 V = = VIH = VCC − 0.6 V
10.0 20.0
±20.0
μA
750
< < DC Characteristics (Ta = −40~85°C, 2.3 V = VCC = 2.7 V)
Characteristics High level Low level Symbol VIH VIL Test Condition
⎯ ⎯
VCC (V) 2.3~2.7 2.3~2.7 2.3~2.7 2.3 2.3 2.3 2.3~2.7 2.3 2.3 2.3~2.7 2.3~2.7 0 2.3~2.7 2.3~2.7
Min 1.6
⎯
Max
⎯
Unit
Input voltage
0.7
⎯ ⎯ ⎯ ⎯
V
IOH = −100 μA High level Output voltage VOH VIN = VIH or VIL IOH = −6 mA IOH = −12 mA IOH = −18 mA IOL = 100 μA Low level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA Input leakage current 3-state output off-state current Power off leakage current Quiescent supply current IIN IOZ IOFF ICC VIN = 0~3.6 V VIN = VIH or VIL VOUT = 0~3.6 V VIN, VOUT = 0~3.6 V VIN = VCC or GND VCC < (VIN, VOUT) < 3.6 V = =
VCC − 0.2 2.0 1.8 1.7
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
V
0.2 0.4 0.6
±5.0 ±10.0 μA μA μA μA
10.0 20.0
±20.0
4
2007-10-19
TC74VCX257FT/FK
< DC Characteristics (Ta = −40~85°C, 1.65 V = VCC
很抱歉,暂时无法提供与“TC74VCX257FK”相匹配的价格&库存,您可以联系我们找货
免费人工找货