TC74VCX74FT/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VCX74FT,TC74VCX74FK
Low-Voltage Dual D-Type Flip-Flop with 3.6-V Tolerant Inputs and Outputs
The TC74VCX74FT/FK is a high-performance CMOS D-type flip-flop which is guaranteed to operate from 1.2-V to 3.6-V. Designed for use in 1.5V, 1.8V, 2.5V or 3.3V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with overvoltage tolerant inputs and outputs up to 3.6 V. The signal level applied to the D INPUT is transferred to Q OUTPUT during the positive going transition of the CK pulse. CLR and PR are independent of the CK and are accomplished by setting the appropriate input low. All inputs are equipped with protection circuits against static discharge.
TC74VCX74FT
TC74VCX74FK
Features
• • Low-voltage operation: VCC = 1.2~3.6 V High-speed operation: tpd = 3.5 ns (max) (VCC = 3.0~3.6 V) : tpd = 4.6 ns (max) (VCC = 2.3~2.7 V) : tpd = 9.2 ns (max) (VCC = 1.65~1.95 V) : tpd = 18.4 ns (max) (VCC = 1.4~1.6 V) : tpd = 46.0ns (max) (VCC = 1.2 V) • Output current : IOH/IOL = ±24 mA (min) (VCC = 3.0 V) : IOH/IOL = ±18 mA (min) (VCC = 2.3 V) : IOH/IOL = ±6 mA (min) (VCC = 1.65 V) : IOH/IOL = ±2 mA (min) (VCC = 1.4 V) • • • • Latch-up performance: −300 mA ESD performance: Machine model ≥ ±200 V Human body model ≥ ±2000 V Package: TSSOP and VSSOP (US) Power-down protection provided on all inputs and outputs Weight TSSOP14-P-0044-0.65A VSSOP14-P-0030-0.50 : 0.06 g (typ.) : 0.02 g (typ.)
1
2007-10-19
TC74VCX74FT/FK
Pin Assignment (top view) IEC Logic Symbol
1 PR 1CK 1D 1 CLR 2 PR 2CK 2D 2 CLR 4 3 2 1 10 11 12 13 S C1 1D R 6 9 8 5
1CLR
1 2 3 4 5 6 7 CK Q D Q CK Q D Q
14 13 12 11 10 9 8
VCC
2CLR
1Q 1Q 2Q 2Q
1D 1CK 1PR 1Q
1Q
2D 2CK 2PR 2Q
2Q
GND
Truth Table
Inputs Outputs
CLR
L H L H H H
PR H L L H H H
D X X X L H X
CK X X X
Q L H H L H Qn
Q H L H H L
Function Clear Preset
⎯ ⎯ ⎯
Qn
No change
X: Don’t care
Absolute Maximum Ratings (Note 1)
Characteristics Power supply voltage DC input voltage DC output voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT PD ICC/IGND Tstg Rating
−0.5~4.6 −0.5~4.6 −0.5~4.6 (Note 2) −0.5~VCC + 0.5 (Note 3) −50 ±50 (Note 4) ±50
Unit V V V mA mA mA mW mA °C
180
±100 −65~150
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: VCC = 0 V Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC
2
2007-10-19
TC74VCX74FT/FK
Operating Ranges (Note 1)
Characteristics Power supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 1.2~3.6
−0.3~3.6
Unit V V (Note 2) (Note 3) (Note 4) (Note 5) (Note 6) (Note 7) °C (Note 8) ns/V mA V
0~3.6 0~VCC
±24
Output current
IOH/IOL
±18 ±6 ±2
Operating temperature Input rise and fall time
Topr dt/dv
−40~85
0~10
Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: VCC = 0 V Note 3: High or low state Note 4: VCC = 3.0~3.6 V Note 5: VCC = 2.3~2.7 V Note 6: VCC = 1.65~1.95 V Note 7: VCC = 1.4~1.6 V Note 8: VIN = 0.8~2.0 V, VCC = 3.0 V
Electrical Characteristics
< DC Characteristics (Ta = −40 to 85°C, 2.7 V < VCC = 3.6 V)
Characteristics H-level L-level Symbol VIH VIL Test Condition
⎯ ⎯
VCC (V) 2.7~3.6 2.7~3.6
Min 2.0
⎯
Max
⎯
Unit
Input voltage
0.8
⎯ ⎯ ⎯ ⎯
V
IOH = −100 μA H-level VOH VIN = VIH or VIL IOH = −12 mA IOH = −18 mA Output voltage IOH = −24 mA IOL = 100 μA L-level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA IOL = 24 mA Input leakage current Power off leakage current Quiescent supply current Increase in ICC per input IIN IOFF ICC
ΔICC
2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7 3.0 3.0 2.7~3.6 0 2.7~3.6 2.7~3.6 2.7~3.6
VCC − 0.2 2.2 2.4 2.2
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
V
0.2 0.4 0.4 0.55
±5.0 μA μA
VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = VIH = VCC − 0.6 V
10.0 20.0
±20.0
μA
750
3
2007-10-19
TC74VCX74FT/FK
< < DC Characteristics (Ta = −40 to 85°C, 2.3 V = VCC = 2.7 V)
Characteristics H-level L-level Symbol VIH VIL Test Condition
⎯ ⎯
VCC (V) 2.3~2.7 2.3~2.7
Min 1.6
⎯
Max
⎯
Unit
Input voltage
0.7
⎯ ⎯ ⎯ ⎯
V
IOH = −100 μA H-level Output voltage VOH VIN = VIH or VIL IOH = −6 mA IOH = −12 mA IOH = −18 mA IOL = 100 μA L-level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA Input leakage current Power-off leakage current Quiescent supply current IIN IOFF ICC VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = =
2.3~2.7 2.3 2.3 2.3 2.3~2.7 2.3 2.3 2.3~2.7 0 2.3~2.7 2.3~2.7
VCC − 0.2 2.0 1.8 1.7
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
V
0.2 0.4 0.6
±5.0 μA μA μA
10.0 20.0
±20.0
< DC Characteristics (Ta = −40 to 85°C, 1.65 V = VCC < 2.3 V)
Characteristics Symbol Test Condition
⎯ ⎯
VCC (V) 1.65~2.3 1.65~2.3
Min 0.65 × VCC
⎯
Max
⎯
Unit
H-level Input voltage L-level
VIH VIL
0.2 × VCC
⎯ ⎯
V
H-level Output voltage L-level Input leakage current Power-off leakage current Quiescent supply current
VOH
VIN = VIH or VIL
IOH = −100 μA IOH = −6 mA
1.65~2.3 1.65 1.65~2.3 1.65 1.65~2.3 0 1.65~2.3 1.65~2.3
VCC − 0.2 1.25
⎯ ⎯ ⎯ ⎯ ⎯ ⎯
V
VOL IIN IOFF ICC
VIN = VIH or VIL VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = =
IOL = 100 μA IOL = 6 mA
0.2 0.3
±5.0 μA μA μA
10.0 20.0
±20.0
4
2007-10-19
TC74VCX74FT/FK
< DC Characteristics (Ta = −40 to 85°C, 1.4 V = VCC < 1.65 V)
Characteristics H-level Input voltage L-level VIL
⎯
Symbol VIH
Test Condition
⎯
VCC (V) 1.4~1.65 1.4~1.65
Min 0.65 × VCC
⎯
Max
⎯
Unit
0.05 × VCC
⎯ ⎯
V
H-level Output voltage L-level Input leakage current Power-off leakage current Quiescent supply current
VOH
VIN = VIH or VIL
IOH = −100 μA IOH = −2 mA
1.4~1.65 1.4 1.4~1.65 1.4 1.4~1.65 0 1.4~1.65 1.4~1.65
VCC − 0.2 1.05
⎯ ⎯ ⎯ ⎯ ⎯ ⎯
V
VOL IIN IOFF ICC
VIN = VIH or VIL VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = =
IOL = 100 μA IOL = 2 mA
0.05 0.35
±5.0 μA μA μA
10.0 20.0
±20.0
< DC Characteristics (Ta = −40 to 85°C, 1.2 V = VCC < 1.4 V)
Characteristics H-level Input voltage L-level H-level L-level Input leakage current Power-off leakage current Quiescent supply current VIL VOH VOL IIN IOFF ICC VIN = VIH or VIL VIN = VIH or VIL VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = =
⎯
Symbol VIH
Test Condition
⎯
VCC (V) 1.2~1.4 1.2~1.4
Min 0.8 × VCC
⎯
Max
⎯
Unit
0.05 × VCC
⎯
V
Output voltage
IOH = −100 μA IOL = 100 μA
1.2 1.2 1.2 0 1.2 1.2
VCC − 0.1
⎯ ⎯ ⎯ ⎯ ⎯
V
μA μA μA
0.05
±5.0
10.0 20.0
±20.0
5
2007-10-19
TC74VCX74FT/FK
AC Characteristics (Ta = −40 to 85°C, input: tr = tf = 2.0 ns) (Note)
Characteristics Symbol Test Condition VCC (V) 1.2 1.5 ± 0.1 1.8 ± 0.15 CL = 30 pF, RL = 500 Ω 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Propagation delay time (CK-Q, Q ) tpLH tpHL Figure 1, Figure 2 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Propagation delay time ( CLR , PR -Q, Q ) tpLH tpHL Figure 1, Figure 4 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Minimum pulse width (CK) tW (H) tW (L) Figure 1, Figure 2 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Minimum pulse width ( CLR , PR ) tW (L) Figure 1, Figure 4 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Minimum set-up time ts Figure 1, Figure 2 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Minimum hold time th Figure 1, Figure 2 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Minimum removal time trem Figure 1, Figure 3 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 Min 40 80 100 200 250 3.0 2.0 1.5 0.8 0.6 3.0 2.0 1.5 0.8 0.6 24 8.0 4.0 1.5 1.5 24 8.0 4.0 1.5 1.5 20 7.5 3.0 1.5 1.5 8.0 3.0 1.0 1.0 1.0 24 8.0 3.0 2.0 1.5 Max
⎯ ⎯ ⎯ ⎯ ⎯
Unit
CL = 15 pF, RL = 2 kΩ Maximum clock frequency fmax Figure 1, Figure 2
MHz
46.0 18.4 9.2 4.6 3.5 46.0 18.4 9.2 4.6 3.5
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
ns
ns
ns
ns
ns
ns
ns
Note:
For CL = 50 pF, add approximately 300 ps to the AC maximum specification.
6
2007-10-19
TC74VCX74FT/FK
Dynamic Switching Characteristics (Ta = 25°C, input: tr = tf = 2.0 ns, CL = 30 pF)
Characteristics Symbol Test Condition VIH = 1.8 V, VIL = 0 V Quiet output maximum dynamic VOL VOLP VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOL VOLV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOH VOHV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) VCC (V) 1.8 2.5 3.3 1.8 2.5 3.3 1.8 2.5 3.3 Typ. 0.25 0.6 0.8
−0.25 −0.6 −0.8
Unit
V
V
1.5 1.9 2.2 V
Note:
Parameter guaranteed by design.
Capacitive Characteristics (Ta = 25°C)
Characteristics Input capacitance Power dissipation capacitance Symbol CIN CPD fIN = 10 MHz Test Condition
⎯
VCC (V) 1.8, 2.5, 3.3 (Note) 1.8, 2.5, 3.3
Typ. 6 20
Unit pF pF
Note:
CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD・VCC・fIN + ICC/2 (per F/F)
AC Test Circuit
Output
CL RL
Measure
VCC Symbol 3.3 ± 0.3 V 2.5 ± 0.2 V 1.8 ± 0.15 V 500 Ω 30 pF 1.5 ± 0.1 V 1.2V 2 kΩ 15 pF
RL CL
Figure 1
7
2007-10-19
TC74VCX74FT/FK
AC Waveform
tr 2 ns Input (CK) 90% VM tr 2 ns Input (D) 90% VM ts (H) th (H) ts (L) th (L) tf 2 ns tw (H) tw (L) tf 2 ns VIH GND
10%
VIH GND
10%
Output (Q, Q )
VOH VM tpHL, LH tpLH, HL VOL
Figure 2 tpLH, tpHL, tw, ts, th
tr 2 ns Input ( CLR , PR ) 90% VIH GND tr 2 ns Input (CK) 90% VM VIH GND Input ( PR ) tw (L) Input ( CLR ) tw (L) VIH GND
10%
VM
VIH GND
10% trem
Output (Q, Q )
VOH VOL
Output (Q, Q )
VOH VM tpHL, LH VM tpHL, LH VOL
Figure 3 trem
Figure 4 tpLH, tpHL, tw
Symbol VIH VM
VCC 3.3 ± 0.3 V 2.7 V 1.5 V 2.5 ± 0.2 V VCC VCC/2 1.8 ± 0.15 V VCC VCC/2 1.5 ± 0.1 V VCC VCC/2 1.2 V VCC VCC/2
8
2007-10-19
TC74VCX74FT/FK
Package Dimensions
Weight: 0.06 g (typ.)
9
2007-10-19
TC74VCX74FT/FK
Package Dimensions
Weight: 0.02 g (typ.)
10
2007-10-19
TC74VCX74FT/FK
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN GENERAL
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
11
2007-10-19