TC7MA157FK

TC7MA157FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MA157FK Low Voltage Quad 2-Channel Multiplexer with 3.6 V Tolerant Inputs and Outputs The TC7MA157FK is a high performance CMOS multiplexer which is guaranteed to operate from 1.2-V to 3.6-V. Designed for use in 1.5 V, 1.8 V, 2.5 V or 3.3 V systems, it achieves high. speed operation while maintaining the CMOS low power dissipation. It is also designed with over voltage tolerant inputs and outputs up to 3.6 V. It consists of four 2-input digital multiplexers with common select and strobe inputs. When the ST input is held “H” level, selection of data is inhibited and all the outputs become “L” level. The SELECT decoding determines whether the A or B inputs get routed to their corresponding Y outputs. All inputs are equipped with protection circuits against static discharge. Weight: 0.02 g (typ.) Features · · Low voltage operation: VCC = 1.2~3.6 V High speed operation: tpd = 3.0 ns (max) (VCC = 3.0~3.6 V) tpd = 3.5 ns (max) (VCC = 2.3~2.7 V) tpd = 7.0 ns (max) (VCC = 1.65~1.95 V) tpd = 14.0 ns (max) (VCC = 1.4~1.6 V) tpd = 35.0 ns (max) (VCC = 1.2 V) · · 3.6 V tolerant inputs and outputs. Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V) IOH/IOL = ±18 mA (min) (VCC = 2.3 V) IOH/IOL = ±6 mA (min) (VCC = 1.65 V) IOH/IOL = ±2 mA (min) (VCC = 1.4 V) · · · · Latch-up performance: ±300 mA ESD performance: Machine model > ±200 V Human body model > ±2000 V Package: VSSOP (US16) Power down protection is provided on all inputs and outputs. 1 2003-03-01 TC7MA157FK Pin Assignment (top view) IEC Logic Symbol (15) (1) (2) (3) (5) (6) (11) (10) (14) (13) SELECT 1A 1B 1Y 2A 2B 2Y GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC ST ST EN G1 1 1 SELECT 1A 1B 2A 2B 3A 3B 4A 4B 4A 4B 4Y 3A 3B 3Y MUX (4) (7) (9) (12) 1Y 2Y 3Y 4Y Truth Table Inputs ST Outputs A X L H X X B X X X L H Y L L H L H SELECT X L L H H H L L L L X: Don’t care 2 2003-03-01 TC7MA157FK System Diagram 2 3 5 6 11 10 14 13 12 4Y 9 3Y 7 2Y 4 1Y 1A 1B 2A 2B 3A 3B 4A 4B SELECT 1 ST 15 Maximum Ratings Characteristics Power supply voltage DC input voltage DC output voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT PD ICC/IGND Tstg Rating -0.5~4.6 -0.5~4.6 -0.5~4.6 (Note1) Unit V V V mA (Note3) mA mA mW mA °C -0.5~VCC + 0.5 (Note2) -50 ±50 ±50 180 ±100 -65~150 Note1: VCC = 0 V Note2: High or low state. IOUT absolute maximum rating must be observed. Note3: VOUT < GND, VOUT > VCC 3 2003-03-01 TC7MA157FK Recommended Operating Range Characteristics Supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 1.2~3.6 -0.3~3.6 0~3.6 0~VCC ±24 Output current IOH/IOL ±18 ±6 ±2 Operating temperature Input rise and fall time Topr dt/dv -40~85 0~10 (Note10) (Note4) (Note5) (Note6) (Note7) (Note8) (Note9) °C ns/V mA Unit V V V Note4: VCC = 0 V Note5: High or low state Note6: VCC = 3.0~3.6 V Note7: VCC = 2.3~2.7 V Note8: VCC = 1.65~1.95 V Note9: VCC = 1.4~1.6 V Note10: VIN = 0.8~2.0 V, VCC = 3.0 V Electrical Characteristics < DC Characteristics (Ta = -40~85°C, 2.7 V < VCC = 3.6 V) Characteristics High level Low level Symbol VIH VIL Test Condition ¾ ¾ IOH = -100 mA High level VOH VIN = VIH or VIL IOH = -12 mA IOH = -18 mA Output voltage IOH = -24 mA IOL = 100 mA Low level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA IOL = 24 mA Input leakage current Power off leakage current Quiescent supply current Increase in ICC per input IIN IOFF ICC DICC VIN = 0~3.6 V VIN, VOUT = 0~3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = VIH = VCC - 0.6 V VCC (V) 2.7~3.6 2.7~3.6 2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7 3.0 3.0 2.7~3.6 0 2.7~3.6 2.7~3.6 2.7~3.6 Min 2.0 ¾ VCC - 0.2 2.2 2.4 2.2 ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ Max ¾ 0.8 ¾ ¾ ¾ ¾ 0.2 0.4 0.4 0.55 ±5.0 10.0 20.0 ±20.0 750 mA mA mA V Unit Input voltage V 4 2003-03-01 TC7MA157FK < < DC Characteristics (Ta = -40~85°C, 2.3 V = VCC = 2.7 V) Characteristics High level Low level Symbol VIH VIL Test Condition ¾ ¾ IOH = -100 mA High level Output voltage VOH VIN = VIH or VIL IOH = -6 mA IOH = -12 mA IOH = -18 mA IOL = 100 mA Low level VOL VIN = VIH or VIL IOL = 12 mA IOL = 18 mA Input leakage current Power off leakage current Quiescent supply current IIN IOFF ICC VIN = 0~3.6 V VIN, VOUT = 0~3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = VCC (V) 2.3~2.7 2.3~2.7 2.3~2.7 2.3 2.3 2.3 2.3~2.7 2.3 2.3 2.3~2.7 0 2.3~2.7 2.3~2.7 Min 1.6 ¾ VCC - 0.2 2.0 1.8 1.7 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Max ¾ 0.7 ¾ ¾ ¾ ¾ 0.2 0.4 0.6 ±5.0 10.0 20.0 ±20.0 mA mA mA V Unit Input voltage V < DC Characteristics (Ta = -40~85°C, 1.65 V = VCC < 2.3 V) Characteristics Symbol Test Condition ¾ ¾ IOH = -100 mA IOH = -6 mA Low level Input leakage current Power off leakage current Quiescent supply current VOL IIN IOFF ICC VIN = VIH or VIL VIN = 0~3.6 V VIN, VOUT = 0~3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = IOL = 100 mA IOL = 6 mA VCC (V) 1.65~2.3 1.65~2.3 1.65~2.3 1.65 1.65~2.3 1.65 1.65~2.3 0 1.65~2.3 1.65~2.3 Min 0.65 ´ VCC ¾ VCC - 0.2 1.25 ¾ ¾ ¾ ¾ ¾ ¾ Max ¾ 0.2 ´ VCC ¾ ¾ 0.2 0.3 ±5.0 10.0 20.0 ±20.0 mA mA mA V V Unit High level Input voltage Low level VIH VIL High level Output voltage VOH VIN = VIH or VIL 5 2003-03-01 TC7MA157FK < < DC Characteristics (Ta = -40~85°C, 1.4 V = VCC = 1.65 V) Characteristics High level Input voltage Low level VIL ¾ IOH = -100 mA IOH = -2 mA Low level Input leakage current Power off leakage current Quiescent supply current VOL IIN IOFF ICC VIN = VIH or VIL VIN = 0~3.6 V VIN, VOUT = 0~3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = IOL = 100 mA IOL = 2 mA 1.4~1.65 1.4~1.65 1.4 1.4~1.65 1.4 1.4~1.65 0 1.4~1.65 1.4~1.65 Symbol VIH Test Condition ¾ VCC (V) 1.4~1.65 Min 0.65 ´ VCC ¾ VCC - 0.2 1.05 ¾ ¾ ¾ ¾ ¾ ¾ Max ¾ 0.05 ´ VCC ¾ ¾ 0.05 0.35 ±5.0 10.0 20.0 ±20.0 mA mA mA V V Unit High level Output voltage VOH VIN = VIH or VIL < DC Characteristics (Ta = -40~85°C, 1.2 V = VCC < 1.4 V) Characteristics High level Input voltage Low level High level Low level Input leakage current Power off leakage current Quiescent supply current VIL VOH VOL IIN IOFF ICC VIN = VIH or VIL VIN = VIH or VIL VIN = 0~3.6 V VIN, VOUT = 0~3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = ¾ IOH = -100 mA IOL = 100 mA 1.2~1.4 1.2 1.2 1.2 0 1.2 1.2 ¾ VCC - 0.1 ¾ ¾ ¾ ¾ ¾ Symbol VIH Test Condition ¾ VCC (V) 1.2~1.4 Min 0.8 ´ VCC Max ¾ 0.05 ´ VCC ¾ 0.05 ±5.0 10.0 20.0 ±20.0 mA mA mA V Unit Output voltage V 6 2003-03-01 TC7MA157FK AC Characteristics (Ta = -40~85°C, Input: tr = tf = 2.0 ns) Characteristics Symbol Test Condition VCC (V) 1.2 1.5 ± 0.1 1.8 ± 0.15 CL = 30 pF, RL = 500 Ω 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Propagation delay time (SELECT-Y) tpLH tpHL Figure 1, Figure 2 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Propagation delay time ( ST -Y) tpLH tpHL Figure 1, Figure 2 CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Output to output skew tosLH tosHL (Note11) CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 Min 3.0 2.0 1.5 0.8 0.6 3.0 2.0 1.5 0.8 0.6 3.0 2.0 1.5 0.8 0.6 ¾ ¾ ¾ ¾ ¾ Max 35.0 14.0 7.0 3.5 3.0 45.0 18.0 9.0 4.5 3.5 45.0 18.0 9.0 4.5 3.5 1.5 1.5 0.5 0.5 0.5 ns ns ns ns Unit CL = 15 pF, RL = 2 kΩ Propagation delay time (A, B-Y) tpLH tpHL Figure 1, Figure 2 For CL = 50 pF, add approximately 300 ps to the AC maximum specification. Note11: This parameter is guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 7 2003-03-01 TC7MA157FK Dynamic Switching Characteristics (Ta = 25°C, Input: tr = tf = 2.0 ns, CL = 30 pF) Characteristics Symbol Test Condition VIH = 1.8 V, VIL = 0 V Quiet output maximum dynamic VOL VOLP VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOL VOLV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOH VOHV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V (Note12) (Note12) (Note12) (Note12) (Note12) (Note12) (Note12) (Note12) (Note12) VCC (V) 1.8 2.5 3.3 1.8 2.5 3.3 1.8 2.5 3.3 Typ. 0.25 0.6 0.8 -0.25 -0.6 -0.8 1.5 1.9 2.2 V V V Unit Note12: This parameter is guaranteed by design. Capacitive Characteristics (Ta = 25°C) Characteristics Input capacitance Power dissipation capacitance Symbol CIN CPD fIN = 10 MHz Test Condition ¾ (Note13) VCC (V) 1.8, 2.5, 3.3 1.8, 2.5, 3.3 Typ. 6 20 Unit pF pF Note13: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC 8 2003-03-01 TC7MA157FK AC Test Circuit Output CL RL VCC Symbol 3.3 ± 0.3 V 2.5 ± 0.2 V 1.8 ± 0.15 V 500 Ω 30 pF 1.5 ± 0.1 V 1.2V 2 kΩ 15 pF Measure RL CL Figure 1 AC Waveform tr 2.0 ns Input tf 2.0 ns 90% VM VIH 10% GND VOH VM tpLH Inverting Output tpHL tpHL VOL VOH VM tpLH VOL Non-Inverting Output Symbol VIH VM VCC 3.3 ± 0.3 V 2.7 V 1.5 V 2.5 ± 0.2 V VCC VCC/2 1.8 ± 0.15 V VCC VCC/2 1.5 ± 0.1 V VCC VCC/2 1.2 V VCC VCC/2 Figure 2 tpLH, tpHL 9 2003-03-01 TC7MA157FK Package Dimensions Weight: 0.02 g (typ.) 10 2003-03-01 TC7MA157FK RESTRICTIONS ON PRODUCT USE 000707EBA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 11 2003-03-01