TC7WB125FK

TC7WB125FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7WB125FK Dual Bus Switch The TC7WB125FK is a low on-resistance, high-speed CMOS 2-bit bus switch. This bus switch allows the connections or disconnections to be made with minimal propagation delay while maintaining Low power dissipation which is the feature of CMOS. When output enable (OE) is at low level, the switch is on; when at high level, the switch is off. All inputs are equipped with protector circuits to protect the device from static discharge. Features • • • • • • Operating voltage: VCC = 4.5~5.5 V High speed operation: tpd = 0.25 ns (max) Ultra-low on resistance: RON = 5 Ω (typ.) ESD performance: Machine model ≥ ±200 V Human body model ≥ ±2000 V TTL level input (control input) Package: US8 Weight: 0.01 g (typ.) Pin Assignment (top view) VCC OE2 8 B1 6 7 A2 5 WB 125 1 2 OE1 A1 3 4 B2 GND 1 2007-10-19 TC7WB125FK Truth Table Inputs OE L H Function A port = B port Disconnect System Diagram A1 B1 A2 B2 OE1 OE2 Absolute Maximum Ratings (Note) Characteristics Power supply voltage Control pin input voltage Switch terminal I/O voltage Clump diode current Switch I/O current Power dissipation DC VCC/GND current Storage temperature Symbol VCC VIN VS IIK IS PD ICC/IGND Tstg Rating −0.5~7.0 −0.5~7.0 −0.5~7.0 −50 Unit V V V mA mA mW mA °C 128 200 ±100 −65~150 Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Operating Ranges (Note) Characteristics Power supply voltage Control pin input voltage Switch I/O voltage Operating temperature Control pin input rise/fall time Symbol VCC VIN VS Topr dt/dv Rating 4.5~5.5 0~5.5 0~5.5 −40~85 Unit V V V °C ns/V 0~10 Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. 2 2007-10-19 TC7WB125FK Electrical Characteristics DC Characteristics (Ta = −40~85°C) Characteristics Control pin input “H” level voltage “L” level Input leakage current Power off leakage current Off-state leakage current (switch off) Symbol VIH VIL IIN IOFF ISZ VIN = 0~5.5 V A, B, OE = 0~5.5 V A, B = 0~5.5 V, OE = VCC VIS = 0 V VIS = 2.4 V, IIS = 15 mA Quiescent supply current ICC ΔICC Test Condition ⎯ ⎯ VCC (V) 4.5~5.5 4.5~5.5 4.5~5.5 0 4.5~5.5 4.5 4.5 4.5 5.5 5.5 Min 2.0 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Typ. (Note 1) ⎯ ⎯ ⎯ ⎯ ⎯ Max ⎯ Unit V μA μA μA 0.8 ±1.0 ±1.0 ±1.0 IIS = 64 mA IIS = 30 mA 5 5 10 ⎯ ⎯ 7 7 15 10 2.5 μA Ω ON resistance (Note 2) RON VIN = VCC or GND IOUT = 0 VIN = 3.4 V (one input) mA Note1: The typical values are at VCC = 5 V, Ta = 25°C. Note2: Apply the specified current to the switch, then measure the voltages on pins A and B. The on-resistance is the lower of the two. AC Characteristics (Ta = −40~85°C) Characteristics Propagation delay time (bus to bus) Output enable time Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ Test Condition VCC (V) (Note) 4.5 Min Max Unit Figure 1, Figure 2 ⎯ 0.25 ns Figure 1, Figure 3 4.5 ⎯ 4.0 ns Output disable time Figure 1, Figure 3 4.5 ⎯ 5.0 ns Note: The propagation delay time is calculated by the RC (on-resistance and load capacitance) time constant. Capacitive Characteristics (Ta = 25°C) Characteristics Control pin input capacitance Switch terminal capacitance Symbol CIN CI/O OE = VCC Test Condition (Note) (Note) VCC (V) 5.0 5.0 Typ. 3 10 Unit pF pF Note: This item is guaranteed by design. 3 2007-10-19 TC7WB125FK AC Test Circuit Open 7.0 V GND Measure CL = 50 pF RL = 500 Ω CL RL Switch RL Parameter tpLH, tpHL tpLZ, tpZL tpHZ, tpZH Switch Open 7.0 V Open Output Figure 1 AC Waveform tr 2.5 ns Input (A, B) tf 2.5 ns 90% 1.5 V 10% 3.0 V GND VOH 1.5 V tpLH tpHL VOL Output (B, A) Figure 2 tpLH, tpHL tr 2.5 ns Output Enable ( OE ) tpLZ Output (A, B) Low to Off to Low tpHZ Output (A, B) High to Off to High Outputs enabled tf 2.5 ns 90% 1.5 V 10% tpZL 3.5 V 1.5 V VOL + 0.3 V VOH − 0.3 V tpZH VOL VOH 1.5 V GND Outputs disabled Outputs enabled 3.0 V GND Figure 3 tpLZ, tpHZ, tpZL, tpZH 4 2007-10-19 TC7WB125FK Package Dimensions Weight: 0.01 g (typ.) 5 2007-10-19 TC7WB125FK RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN GENERAL • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-19