TLP172G(F)

TLP172G TOSHIBA Photocoupler Photorelay TLP172G Modem·Fax Cards, Modems in PC STB PBX Measurement Equipment Unit: mm The Toshiba TLP172G consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a SOP, which is suitable for surface mount assembly. Because of the high-voltage MOSFET used to the output terminals, TLP172G is suitable for a hook relay of a modem, a facsimile, and a dial pulse relay The TLP172G is suitable for the modem applications which require space savings. • 4-pin SOP (2.54SOP4): Height = 2.1 mm, Pitch = 2.54 mm • 1-Form-A • Peak Off-state voltage: 350 V (min) • Trigger LED current: 3 mA (max) • On-state current: 110 mA (max) • On-state resistance: 35 Ω (max t < 1 s) • • JEDEC ― On-state resistance: 50 Ω (max continuous) JEITA ― Isolation voltage: 1500 Vrms (min) TOSHIBA • UL recognized: UL1577, File No. E67349 • cUL recognized: CSA Component Acceptance Service No. 5A 11-5H1 Weight: 0.1 g (typ.) File No.E67349 Pin Configuration (top view) 1 4 2 3 1: Anode 2: Cathode 3: Drain 4: Drain Start of commercial production 2001-12 1 2017-05-24 TLP172G Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit IF 50 mA ΔIF/°C −0.5 mA/°C Forward current Forward current derating (Ta ≥ 25°C) LED Reverse voltage VR 5 V Diode power dissipation PD 50 mW ΔPD /°C -0.5 mW/°C Tj 125 °C VOFF 350 V ION 110 mA ΔION/°C −1.1 mA/°C Diode power dissipation derating (Ta >25°C) Junction temperature Off-state output terminal voltage On-state current Detector On-state current derating (Ta ≥ 25°C) Output power dissipation PO 300 mW ΔPO / °C −3.0 mW / °C Tj 125 °C Storage temperature range Tstg −55 to 125 °C Operating temperature range Topr −40 to 85 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC, 1 minute, R.H. ≤ 60%) (Note 1) BVS 1500 Vrms Output power dissipation derating (Ta ≥ 25°C) Junction temperature Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: LED side pins shorted together, and detector side pins shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage VDD ― ― 280 V Forward current IF 5 7.5 25 mA On-state current ION ― ― 100 mA Operating temperature Topr −20 ― 65 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Electrical Characteristics (Ta = 25°C) Characteristics LED Detector Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V   10 μA Capacitance between terminals CT VF = 0 V, f = 1 MHz  30  pF Off-state current IOFF VOFF = 350 V   1 μA Capacitance between terminals COFF V = 0 V, f = 1 MHz  30  pF 2 2017-05-24 TLP172G Coupled Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Trigger LED current IFT ION = 110 mA  1 3 mA Return LED current IFC IOFF = 100 μA 0.1   mA On-state resistance RON ION = 110 mA, IF= 5 mA, t < 1 s  25 35 ION = 110 mA, IF= 5 mA, continuous  35 50 Min Typ. Max Unit 0.8  pF  Ω Ω Isolation Characteristics (Ta = 25°C) Characteristics Symbol Capacitance input to output VS = 0 V, f = 1 MHz CS Isolation resistance Test Condition  VS = 500 V, R.H. ≤ 60% RS 5 × 10 AC, 1 minute Isolation voltage BVS 10 10 14 1500   AC, 1 second, in oil  3000  DC, 1 minute, in oil  3000  Vdc Min Typ. Max Unit  0.3 1  0.1 1 Vrms Switching Characteristics (Ta = 25°C) Characteristics Symbol Turn-on time tON Turn-off time Test Condition RL = 200 Ω VDD = 20 V, IF = 5 mA tOFF (Note 2) ms Note 2: Switching time test circuit IF 1 4 RL VDD IF VOUT 2 VOUT 3 10% tON 3 90% tOFF 2017-05-24 TLP172G IF – Ta (mA) 80 60 40 20 0 −20 0 20 40 ION – Ta 240 Allowable On-sate current ION Allowable forward current IF (mA) 100 60 80 100 200 160 120 80 40 0 −20 120 0 20 Ambient temperature Ta (°C) 100 IF – V F 200 Ta = 25°C (mA) On-state current ION (mA) Forward current IF 10 3 1 0.3 0.8 1 1.2 1.4 Forward voltage VF 40 1.6 120 ION – VON 0 −100 −3 −2 −1 0 1 2 3 4 On-state voltage VON (V) RON – Ta IFT – Ta 5 ION = 110 mA IF = 5 mA t