TLP202G

TLP202G

  • 厂商:

    TOSHIBA(东芝)

  • 封装:

  • 描述:

    TLP202G - Measurement Equipment - Toshiba Semiconductor

  • 详情介绍
  • 数据手册
  • 价格&库存
TLP202G 数据手册
TLP202G TOSHIBA Photocoupler Photorelay TLP202G PC Card Modems PBX STB (Set Top Boxes) Measurement Equipment The Toshiba TLP202G consists of a gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in an 8-pin SOP package. This photorelay has a characteristic of high-withstanding voltage between output pins which enables TLP202G to be applied in hook relays and dial-pulse for modems and facsimiles. Moreover, the TLP202G is used for PCMCIA-compliant card modems because the maximum mounted height of SOP package is as small as 2.1 mm. • • • • • • • • • 8-pin SOP (2.54SOP8): Height = 2.1 mm, Pitch = 2.54 mm Normally open (1-form-A) device Peak Off-state voltage: 350 V (min) Trigger LED current: 3 mA (max) On-state current: 110 mA (max) On-state resistance: 35 Ω (max, t < 1 s) On-state resistance: 50 Ω (max, continuous) Isolation voltage: 1500 Vrms (min) UL recognized: UL1557, File No.E67349 JEDEC JEITA TOSHIBA ― ― 11-10H1 Unit: mm Weight: 0.2 g (typ.) Pin Configuration (top view) 1 8 2 7 1, 3 : Anode 2, 4 : Cathode 3 6 5 6 7 8 : Drain D1 : Drain D2 : Drain D3 : Drain D4 4 5 1 2007-10-01 TLP202G Absolute Maximum Rating (Ta = 25°C) Characteristics Forward current Forward current derating (Ta > 25°C) = Reverse voltage Junction temperature Off-state output terminal voltage On-state current Detector Forward current derating (Ta > 25°C) = Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min, R.H. < 60%) = (Note 1) Symbol IF ΔIF/°C VR Tj VOFF ION ΔION/°C Tj Tstg Topr Tsol BVS Rating 50 −0.5 5 125 350 110 −1.1 125 −55~125 −40~85 260 1500 Unit mA mA/°C V °C V mA mA/°C °C °C °C °C Vrms LED Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: LED pins are shorted together. Detector pins are also shorted together. Recommended Operating Conditions Characteristics Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min ⎯ 5 ⎯ −20 Typ. ⎯ 10 ⎯ ⎯ Max 280 25 100 65 Unit V mA mA °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Electrical Characteristics (Ta = 25°C) Characteristics Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 350 V V = 0, f = 1 MHz Min 1.0 ⎯ ⎯ ⎯ ⎯ Typ. 1.15 ⎯ 30 ⎯ 30 Max 1.3 10 ⎯ 1 ⎯ Unit V μA pF μA pF 2 2007-10-01 TLP202G Coupled Electrical Characteristics (Ta = 25°C) Characteristics Trigger LED current Return LED current On-state resistance Symbol IFT IFC RON Test Condition ION = 110 mA IOFF = 100 μA ION = 110 mA, IF = 5 mA, t < 1 s ION = 110 mA, IF = 5 mA Min ⎯ 0.1 ⎯ ⎯ Typ. 1 ⎯ 25 35 Max 3 ⎯ 35 50 Unit mA mA Ω Isolation Characteristics (Ta = 25°C) Characteristics Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0 V, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 min Isolation voltage BVS AC, 1 s, in oil DC, 1 min, in oil Min ⎯ 5 × 10 10 Typ. 0.8 10 14 Max ⎯ ⎯ ⎯ ⎯ ⎯ Unit pF Ω Vrms Vdc 1500 ⎯ ⎯ ⎯ 3000 3000 Switching Characteristics (Ta = 25°C) Characteristics Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 Ω VDD = 20 V, IF = 5 mA Min ⎯ (Note 2) ⎯ Typ. 0.3 0.1 Max 1 1 Unit ms Note 2: Switching time test circuit IF VDD IF VOUT 2 7 VOUT 10% tON 90% tOFF 1 8 RL 3 2007-10-01 TLP202G IF – Ta 100 240 ION – Ta (mA) Allowable On-sate current ION IF (mA) 80 200 Allowable forward current 160 60 120 40 80 20 40 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 Ambient temperature Ta (°C) Ambient temperature Ta (°C) IF – V F 100 Ta = 25°C 200 Ta = 25°C IF = 5 m A ION – VON On-state current ION (mA) 30 (mA) 100 10 Forward current IF 3 0 1 −100 0.3 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 −200 −4 −3 −2 −1 0 1 2 3 4 Forward voltage VF (V) On-state voltage VON (V) RON – Ta 50 ION = 110 mA IF = 5 m A t
TLP202G
物料型号: - 型号为TLP202G,是东芝公司生产的光继电器。

器件简介: - TLP202G由一个镓砷化物红外发光二极管与一个光MOSFET组成,封装在8脚SOP封装中。该光继电器具有高耐压特性,适用于调制解调器和传真机的钩继电器和拨号脉冲,也适用于符合PCMCIA标准的卡模式调制解调器,因为SOP封装的最大安装高度仅为2.1mm。

引脚分配: - 引脚配置(从顶部视图):1, 3脚为阳极;2, 4脚为阴极;5脚为漏极D1;6脚为漏极D2;7脚为漏极D3;8脚为漏极D4。

参数特性: - 断态峰值电压:350V(最小值) - 触发LED电流:3mA(最大值) - 导通状态电流:110mA(最大值) - 导通状态电阻:35Ω(最大值,t<1s);50Ω(最大值,连续) - 隔离电压:1500Vrms(最小值) - UL认证:UL1557,文件编号E67349

功能详解: - TLP202G光继电器具有高耐压特性,使其可以应用于钩继电器和调制解调器、传真机的拨号脉冲。由于SOP封装的最大安装高度小,也适用于PCMCIA卡模式调制解调器。

应用信息: - 应用领域包括PC卡调制解调器、PBX、单元:毫米、STB(机顶盒)、测量设备。

封装信息: - 封装类型为8脚SOP(2.54SOP8),高度为2.1mm,间距为2.54mm。该器件为常开型(1-form-A)设备。
TLP202G 价格&库存

很抱歉,暂时无法提供与“TLP202G”相匹配的价格&库存,您可以联系我们找货

免费人工找货