TLP281,TLP281-4
TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR
TLP281, TLP281-4
PROGRAMMABLE CONTROLLERS
AC/DC-INPUT MODULE
PC CARD MODEM(PCMCIA)
Unit: mm
TLP281 and TLP281-4 is a very small and thin coupler, suitable
for surface mount assembly in applications such as PCMCIA Fax
modem, programmable controllers.
TLP281 and TLP281-4 consist of photo transistor, optically coupled
to a gallium arsenide infrared emitting diode.
Collector-Emitter Voltage
: 80 V (min)
Current Transfer Ratio
Rank GB
: 50% (min)
: 100% (min)
Isolation Voltage
: 2500 Vrms (min)
UL Recognized
: UL1577, File No. E67349
BSI Approved
: BS EN 60065: 2002,
: BS EN 60950-1: 2002
Certificate No. 8143, 8144
TOSHIBA
11-3A1
Weight: 0.05 g (typ.)
Pin Configuration (top view)
Unit: mm
TLP281
TLP281-4
1
4
1
16
2
3
2
15
3
14
4
13
5
12
6
11
7
10
8
9
1:ANODE
2:CATHODE
3:EMITTER
4:COLLECTOR
TOSHIBA
11-10F1
Weight: 0.19 g (typ.)
1,3,5,7
:ANODE
2,4,6,8
:CATHODE
9,11,13,15 :EMITTER
10,12,14,16 :COLLECTOR
Start of commercial production
1996/03
1
2014-09-08
TLP281,TLP281-4
Current Transfer Ratio
TYPE
TLP281
TLP281-4
Classification(*1)
Current Transfer Ration (%)
(IC / IF)
IF = 5 mA, VCE = 5 V, Ta = 25°C
Min
Max
Marking of Classification
■
■
Blank
50
600
Blank,Y ,YE,G,G ,GR,B,BL,GB
Rank Y
50
150
YE
Rank GR
100
300
GR
Rank BL
200
600
BL
Rank GB
100
600
GB
Rank YH
75
150
Y
Rank GRL
100
200
G
Rank GRH
150
300
G
Rank BLL
200
400
B
Blank
50
600
Blank, GB
Rank GB
100
600
GB
■
■
*1: Ex. rank GB: TLP281 (GB)
(Note): Application type name for certification test, please use standard product type name, i.e.
TLP281 (GB): TLP281, TLP281−4 (GB): TLP281−4
2
2014-09-08
TLP281,TLP281-4
Absolute Maximum Ratings (Ta = 25°C)
CHARACTERISTIC
SYMBOL
Forward Current
LED
TLP281−4
IF
Forward Current Derating
UNIT
50
∆IF /°C
−0.7 (Ta≥53°C)
mA
−0.5 (Ta≥25°C)
mA /°C
Pulse Forward Current (Note 1)
IFP
1
A
Reverse Voltage
VR
5
V
Junction Temperature
DETECTOR
RATING
TLP281
Tj
125
°C
Collector-Emitter Voltage
VCEO
80
V
Emitter-Collector Voltage
VECO
7
V
IC
50
mA
Collector Current
Collector Power Dissipation
(1 Circuit)
Collector Power Dissipation
Derating(Ta≥25°C) (1 Circuit)
PC
150
100
mW
∆PC /°C
−1.5
−1.0
mW /°C
Junction Temperature
Tj
125
°C
Operating Temperature Range
Topr
−55 to 100
°C
Storage Temperature Range
Tstg
−55 to 125
°C
Lead Soldering Temperature
Tsol
260 (10s)
°C
Total Package Power Dissipation
(1 Circuit)
Total Package Power Dissipation
Derating (Ta≥25°C) (1 Circuit)
Isolation Voltage
(Note 2)
PT
200
170
mW
∆PT /°C
−2.0
−1.7
mW /°C
BVS
2500(AC,1min,R.H.≤60%)
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note 1) Pulse width ≤ 100μs, frequency 100Hz
(Note 2) AC, 1 minute, R.H.≤60%,Device considered a two terminal device : LED side pins shorted together and
DETECTOR side pins shorted together.
Individual Electrical Characteristics (Ta = 25°C)
DETECTOR
LED
CHARACTERISTIC
SYMBOL
TEST CONDITION
MIN
TYP.
MAX
UNIT
Forward Voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse Current
IR
VR = 5 V
—
—
10
μA
Capacitance
CT
V = 0, f = 1 MHz
—
30
—
pF
Collector-Emitter Breakdown Voltage
V(BR) CEO
IC = 0.5 mA
80
—
—
V
Emitter-Collector Breakdown Voltage
V(BR) ECO
IE = 0.1 mA
7
—
—
V
VCE = 48 V
—
0.01
0.1
—
2
10
—
2
50
—
4
50
—
10
—
Collector Dark Current
(Note 3)
ICEO
Ambient Light Below (100 ℓx)
(Note 4)
VCE = 48 V, Ta = 85°C
Ambient Light Below (100 ℓx)
(Note 4)
Capacitance (Collector to Emitter)
CCE
V = 0, f = 1 MHz
μA
μA
pF
(Note 3) Because of the construction,leak current might be increased by ambient light.
Please use photocoupler with less ambient light.
(Note 4) Irradiation to marking side using standard light bulb.
3
2014-09-08
TLP281,TLP281-4
Coupled Electrical Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
Current Transfer Ratio
Saturated CTR
Collector-Emitter
Saturation Voltage
IC / IF
IC / IF (sat)
VCE (sat)
TEST CONDITION
MIN
TYP.
MAX
50
—
600
100
—
600
—
60
—
30
—
—
IC = 2.4 mA, IF = 8 mA
—
—
0.4
IC = 0.2 mA, IF = 1 mA
—
0.2
—
—
—
0.4
—
—
10
μA
MIN
TYP.
MAX
UNIT
—
0.8
—
pF
—
Ω
IF = 5 mA, VCE = 5 V
Rank GB
IF = 1 mA, VCE = 0.4 V
Rank GB
Rank GB
Off-State Collector Current
IC (off)
VF = 0.7 V, VCE = 48 V
UNIT
%
%
V
Isolation Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
Capacitance
(Input to Output)
CS
Isolation Resistance
RS
TEST CONDITION
VS = 0 V, f = 1 MHz
VS = 500 V, R.H. ≤ 60%
AC, 1 minute
Isolation Voltage
BVS
5×10
10
10
14
2500
—
—
AC, 1 second, in oil
—
5000
—
DC, 1 minute, in oil
—
5000
—
Vdc
MIN
TYP.
MAX
UNIT
—
2
—
—
3
—
—
3
—
—
3
—
—
2
—
—
25
—
—
40
—
Vrms
Switching Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
Rise Time
tr
Fall Time
tf
Turn-On Time
ton
Turn-Off Time
toff
Turn-On Time
tON
Storage Time
ts
Turn-Off Time
tOFF
TEST CONDITION
VCC = 10 V, IC = 2 mA
RL = 100Ω
RL = 1.9 kΩ (Fig.1)
VCC = 5 V, IF = 16 mA
μs
μs
(Fig.1) SWITCHING TIME TEST CIRCUIT
4
2014-09-08
TLP281,TLP281-4
TLP281
TLP281-4
TLP281
TLP281-4
*The above graphs show typical characteristic.
5
2014-09-08
TLP281,TLP281-4
IC / IF – IF
1000
Current transfer ratio
IC / IF (%)
VCE = 10V
VCE = 5V
Sample A
VCE = 0.4V
100
Sample B
10
0.1
1
10
100
Forward current IF (mA)
*The above graphs show typical characteristic.
6
2014-09-08
TLP281,TLP281-4
*The above graphs show typical characteristic.
7
2014-09-08
TLP281,TLP281-4
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for
the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,
programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.
Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export
laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export
Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in
compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
8
2014-09-08