TLP504A-2(GB,F)

TLP504A,TLP504A-2 TOSHIBA Photocoupler IRED & Photo-Transistor TLP504A, TLP504A-2 Programmable Controllers AC/DC-Input Module Solid State Relay Unit: mm The TOSHIBA TLP504A and TLP504A-2 consists of a phototransistor optically coupled to an infrared emitting diode. The TLP504A offers two isolated channels in an eight lead plastic DIP package, while the TLP504A-2 provides four isolated channels in a sixteen plastic DIP package. • Collector-emitter voltage: 55 V (min) • Current transfer ratio: 50% (min) • Isolation voltage: 2500 Vrms (min) • UL-recognized: UL 1577, File No.E67349 Rank GB: 100% (min) , TOSHIBA Weight: 0.54 g (typ.) Pin Configurations (top view) TLP504A TLP504A-2 1 8 1 16 2 7 2 15 3 6 3 14 4 5 4 13 5 12 6 11 7 10 8 9 1, 4 : Anode 2, 3 : Cathode 5, 8 : Emitter 6, 7 : Collector 11-10C4 TOSHIBA 11-20A3 Weight: 1.1 g (typ.) 1, 4, 5, 8 : Anode 2, 3, 6, 7 : Cathode 9, 12, 13, 16 : Emitter 10, 11, 14, 15 : Collector Start of commercial production 1981-01 © 2019 Toshiba Electronic Devices & Storage Corporation 1 2019-06-24 TLP504A,TLP504A-2 Absolute Maximum Ratings (Ta = 25°C) Characteristics Forward current LED Forward current derating Unit TLP504A TLP504A-2 IF 60 50 mA ΔIF/°C -0.7 (Ta ≥ 39°C) -0.5 (Ta ≥ 25°C) mA/°C Pulse forward current (100μs pulse, 100pps) IFP 1 A Reverse voltage VR 5 V Diode power dissipation PD 100 mW Diode power dissipation derating Junction temperature Detector Rating Symbol ΔPD/°C -1.2 (Ta ≥ 39°C) -1.0 (Ta ≥ 25°C) mW/°C Tj 125 °C Collector-emitter voltage VCEO 55 V Emitter-collector voltage VECO 7 V Collector current IC 50 mA Collector power dissipation (1 circuit) PC 150 100 mW ΔPC/°C -1.5 -1.0 mW/°C Collector power dissipation derating (1 circuit) (Ta ≥ 25°C) Junction temperature Tj 125 °C Storage temperature range Tstg -55 to 150 °C Operating temperature range Topr -55 to 100 °C Lead soldering temperature (10 s) Tsol 260 °C Total package power dissipation RT 250 150 mW Total package power dissipation derating (Ta ≥ 25°C) ΔPT/°C -2.5 -1.5 mW/°C Isolation voltage (AC, 60 s, R.H.≤ 60 %) (Note 1) 2500 BVS Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two terminal device: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristicss Supply voltage Symbol Min. Typ. Max. Unit VCC ― 5 24 V Forward current IF ― 16 20 mA Collector current IC ― 1 10 mA Topr -25 ― 85 °C Operating temperature Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. © 2019 Toshiba Electronic Devices & Storage Corporation 2 2019-06-24 TLP504A,TLP504A-2 Electrical Characteristics (Ta = 25°C) Detector LED Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V — — 10 μA Capacitance CT V = 0 V, f = 1 MHz — 30 — pF Collector-emitter breakdown voltage V(BR)CEO IC = 0.5 mA 55 — — V Emitter-collector breakdown voltage V(BR)ECO IE = 0.1 mA 7 — — V VCE = 24 V — 10 100 nA VCE = 24 V, Ta = 85 °C — 2 50 μA V = 0 V, f = 1 MHz — 10 — pF Min Typ. Max Unit 50 — 600 100 — 600 — 60 — 30 — — IC = 2.4 mA, IF = 8 mA — — 0.4 IC = 0.2 mA, IF = 1 mA — 0.2 — — — 0.4 Min Typ. Max Unit — 0.8 — pF 10 — Ω — — Vrms Collector dark current ICEO Capacitance collector to emitter CCE Coupled Electrical Characteristics (Ta = 25°C) Characteristics Symbol Current transfer ratio Saturated CTR Collector-emitter saturation voltage IC/IF IC/IF(sat) VCE(sat) Test Condition IF = 5 mA, VCE = 5 V Rank GB IF = 1 mA, VCE = 0.4 V Rank GB Rank GB % % V Isolation Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Capacitance input to output CS VS = 0 V, f = 1 MHz Isolation resistance RS VS = 500 V, R.H.≤ 60 % Isolation voltage © 2019 Toshiba Electronic Devices & Storage Corporation BVS AC, 60 s 3 5×10 10 2500 14 2019-06-24 TLP504A,TLP504A-2 Switching Characteristics (Ta = 25°C) Characteristic Symbol Rise time tr Fall time tf Turn-on time ton Turn-off time toff Turn-on time tON Storage time ts Turn-off time tOFF Test Condition VCC = 10 V, IC = 2 mA RL = 100 Ω RL = 1.9 kΩ VCC = 5 V, IF = 16 mA (Fig.1) Min Typ. Max — 2 — — 3 — — 3 — — 3 — — 2 — — 15 — — 25 — Unit μs μs Fig. 1 Switching time test circuit IF RL IF VCC tS VCE © 2019 Toshiba Electronic Devices & Storage Corporation 4 VCE 4.5V 0.5V tON tOFF VCC 2019-06-24 TLP504A,TLP504A-2 IF – Ta 200 100 80 60 TLP504A TLP504A-2 40 0 -20 160 TLP504A 120 TLP504A-2 80 40 20 0 20 40 Ambient 60 100 80 temperature Ta 0 -20 120 20 Ambient 100 Pulse width ≤ 100μs 3000 0 (°C) IFP – DR 5000 40 60 100 80 temperature Ta 120 (°C) IF – VF Ta = 25°C 50 (mA) Ta = 25°C 1000 500 Forward current IF Allowable pulse forward current IFP (mA) PC – Ta 240 Allowable collector power dissipation PC (mW) Allowable forward current IF (mA) 120 300 100 50 30 30 10 5 3 1 0.5 0.3 10 10-3 10-2 10-1 100 0.1 0.4 Duty cycle ratio DR 0.6 0.8 1.0 Forward voltage -2.8 (mA) 1000 -2.4 Pulse forward current IFP Forward voltage temperature coefficient ΔVF/ΔTa (mV/°C) ΔVF/ΔTa – IF -2.0 -1.6 -1.2 -0.8 -0.4 0.1 0.3 1 Forward 3 10 current IF (mA) VF 1.4 1.6 1.4 1.6 (V) IFP – VFP Pulse width ≤ 10μs 500 Repetitive frequency=100Hz 300 Ta = 25°C 100 50 30 10 5 3 1 0 30 1.2 0.4 0.8 1.0 Pulse forward voltage 1.2 VFP (V) NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. © 2019 Toshiba Electronic Devices & Storage Corporation 5 2019-06-24 TLP504A,TLP504A-2 ICEO – Ta IC – VCE 80 101 10V 5V Collector Collector dark current ICEO (μA) 100 current VCE = 24V 60 50mA IC (mA) Ta = 25°C 10-1 30mA 20mA 40 15mA PC(MAX.) 10mA 20 IF=5mA 0 10-2 0 2 4 8 6 Collector-emitter voltage VCE 10 (V) IC – VCE 10-3 50mA 40 20 80 60 100 120 Ambient temperature Ta (°C) IC – IF 100 Ta = 25°C VCE = 5V VCE = 0.4V 50 20mA 15 10mA 10 5mA IC 0 20 current 10 -4 5 0 0 IF=2mA 0.2 0.4 0.6 0.8 Collector-emitter voltage 10 5 1.0 1.2 VCE 1.4 (V) IC/IF – IF 500 SAMPLE A 300 SAMPLE B 1 SAMPLE A Current transfer ratio IC/IF (%) Collector current IC (mA) 30 3 Ta = 25°C 40mA 30mA Collector (mA) 25 0.5 0.3 0.1 50 SAMPLE B 30 Ta = 25°C VCE = 5V VCE = 0.4V 10 0.05 0.03 0.3 100 1 3 Forward current 10 IF 30 5 0.3 100 (mA) 1 3 10 Forward current IF 30 100 (mA) NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. © 2019 Toshiba Electronic Devices & Storage Corporation 6 2019-06-24 TLP504A,TLP504A-2 VCE (sat) – Ta IC – Ta 100 IF = 5mA VCE = 5V 25mA IC = 1mA 50 0.16 30 10mA IC (mA) 0.12 0.08 Collector current Collector-emitter saturation voltage VCE(sat) (V) 0.20 0.04 0 -20 0 Ambient 20 40 60 temperature Ta 80 100 (°C) 5mA 10 5 3 1mA 1 0.5 IF = 0.5mA 0.3 1000 500 300 Switching Time －RL Ta = 25°C 0.1 IF = 16mA -20 0 20 40 60 80 100 Ambient temperature Ta (°C) VCC = 5V Switching time (μs) tOFF 100 50 ts 30 10 5 3 1 1 tON 3 10 Load 30 100 300 resistance RL (kΩ) NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. © 2019 Toshiba Electronic Devices & Storage Corporation 7 2019-06-24 TLP504A,TLP504A-2 RESTRICTIONS ON PRODUCT USE Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”. Hardware, software and systems described in this document are collectively referred to as “Product”. • TOSHIBA reserves the right to make changes to the information in this document and related Product without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative or contact us via our website. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. https://toshiba.semicon-storage.com/ © 2019 Toshiba Electronic Devices & Storage Corporation 8 2019-06-24