TLP523(F)

TLP523,TLP523−2,TLP523−4 TOSHIBA Photocoupler GaAs Ired & Photo−Transistor TLP523, TLP523−2, TLP523−4 Unit: mm Programmable Controllers DC−Output Module Solid State Relay The TOSHIBA TLP523, −2 and −4 consist of a gallium arsenide infrared emitting diode coupled with a silicon, Darlington connected, phototransistor which has an integral base−emitter resistor to optimize switching speed and elevated temperature characteristics. The TLP523−2 offers two isolated channels in an eight lead plastic DIP package, while the TLP523−4 provides four isolated channels per package. • Current transfer ratio: 500% (min) (IF = 1 mA) • Isolation voltage: 2500 Vrms (min) • Collector−emitter voltage: 55 V (min) • Leakage current: 10μA (max) (Ta = 85°C) • UL recognized: UL1577, file no. E67349 11−5B2 TOSHIBA Weight: 0.26 g (typ.) Pin Configurations (top view) TLP523-2 TLP523 TLP523-4 1 4 1 8 1 16 2 3 2 7 2 15 3 6 3 14 4 5 4 13 5 12 6 11 7 10 8 9 TOSHIBA 11−10C4 Weight: 0.54 g (typ.) 1 : Anode 2 : Cathode 3 : Emitter 4 : Collector 1, 3 : Anode 2, 4 : Cathode 5, 7 : Emitter 6, 8 : Collector 1, 3, 5, 7 : Anode 2, 4, 6, 8 : Cathode 9, 11, 13, 15 : Emitter 10, 12, 14, 16 : Collector TOSHIBA 11−20A3 Weight: 1.1 g (typ.) Start of commercial production 1984/08 1 2014-09-22 TLP523,TLP523−2,TLP523−4 Absolute Maximum Ratings (Ta = 25°C) Rating Characteristic LED Forward current Detector TLP523 TLP523−2 TLP523−4 Unit IF 60 50 mA ∆IF /°C −0.7 (Ta ≥ 39°C) −0.5 (Ta ≥ 25°C) mA /°C Symbol Forward current derating Pulse forward current IFP 1 (100μs pulse, 100pps) A Reverse voltage VR 5 V Collector−emitter voltage VCEO 55 V Emitter−collector voltage VECO 0.3 V Collector current IC 150 mA Collector power dissipation (1 circuit) PC 150 100 mW ∆PC /°C −1.5 −1.0 mW /°C Collector power dissipation derating (1 circuit (Ta ≥ 25°C)) Operating temperature range Topr −55 to 100 °C Storage temperature range Tstg −55 to 125 °C Lead soldering temperature (10 s) Tsol 260 °C Total power dissipation PT 250 150 mW ∆PT /°C −2.5 −1.5 mW /°C Total power dissipation derating (Ta ≥ 25°C) Isolation voltage (Note 1) BVS 2500 (AC, 1minute, R.H.≤ 60%) Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two terminal device: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage VCC ― 5 24 V Forward current IF ― 16 20 mA Topr −25 ― 85 °C Operating temperature range Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2014-09-22 TLP523,TLP523−2,TLP523−4 Electrical Characteristics (Ta = 25°C) LED Characteristic Min Typ. Max Unit VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V — — 10 μA Capacitance CT V = 0, f = 1 MHz — 30 — pF IC = 1 mA 55 — — V VCE = 24 V — 10 200 nA VCE = 24 V, Ta = 85°C — 0.5 10 μA — 10 — pF 500 2000 — % IC = 50 mA, IF = 10 mA — — 1 V VS = 0, f = 1 MHz — 0.8 — pF — Ω V(BR) CEO Collector dark current ICEO Capacitance collector to emitter CCE Current transfer ratio Coupled Test Condition Forward voltage Collector−emitter breakdown voltage Detector Symbol V = 0, f = 1 MHz IC / IF Collector−emitter saturation voltage VCE(sat) Capacitance input to output CS Isolation resistance RS IF = 1 mA, VCE = 1 V VS = 500 V, R.H.≤ 60% 5×10 10 10 14 Switching Characteristics (Ta = 25°C) Characteristic Symbol Turn−on time tON Turn−off time tOFF Test Condition VCC = 10 V, RL = 180 Ω IF = 16 mA Min Typ. Max Unit — 3 — μs — 80 — μs Switching Time Test Circuit IF IF RL IF VCC t VCE 9V 1V VCE t 3 OFF ON 2014-09-22 TLP523,TLP523−2,TLP523−4 IF – Ta 80 TLP523 60 TLP523 -2, -4 40 20 0 -20 0 20 40 60 Ambient temperature 100 120 TLP523 -2, -4 80 40 0 20 40 60 80 100 120 Ambient temperature Ta (℃) Ta (℃) IF – VF 100 Ta = 25℃ Pulse width ≤ 100μs 3000 TLP523 160 0 -20 120 50 Ta = 25℃ (mA) 30 1000 500 Forward current IF Pulse forward current IFP (mA) 80 IFP – DR 5000 PC – Ta 200 Allowable collector power dissipation PC (mW) Allowable forward current IF (mA) 100 300 100 50 30 10 5 3 1 0.5 0.3 10 3 10-3 10-2 3 3 10 -1 100 3 0.1 0.6 Duty cycle patio DR 0.8 1.0 1.2 Forward voltage VF ΔVF / ΔTa – IF (V) IFP – VFP 500 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1.8 1000 Pulse forward current IFP (mA) Forward voltage temperature coefficient ΔVF / ΔTa (mV / ℃) -3.2 1.6 1.4 0.3 1 3 Forward current IF 10 300 100 50 30 10 (mA) Repetitive frequency = 100Hz 3 1 0.6 30 Pulse width ≤ 10μs 5 Ta = 25℃ 1.0 1.4 1.8 Pulse forward voltage 4 2.2 2.6 3 VFP (V) 2014-09-22 TLP523,TLP523−2,TLP523−4 IC – IF 300 IC – IF 300 VCE = 1V Ta = 25°C Ta = 25°C (mA) 100 Sample 1 50 Collector current IC (mA) 100 Collector current IC VCE = 1.2V 30 2 3 10 5 3 50 Sample 1 30 2 3 10 5 3 1 1 0.3 3 10 Forward current IF 1 30 1 0.3 (mA) 10 30 (mA) IC – Ta VCE(sat) – Ta Test condition Test condition A : IC=100mA, IF=10mA A : IF =10mA, VCE=1.2V B : IC=50mA, IF=10mA C : IC=10mA, IF=1mA B : IF =10mA, VCE=1.0V C : IF =2mA, VCE=1.2V D : IC=1mA, IF=0.5mA D : IF =2mA, VCE=1.0V E : IF =1mA, VCE=1.2V 1.6 F : IF =1mA, VCE=1.0V 140 1.4 1.2 Test condition Collector current IC (mA) Collector-emitter saturation voltage VCE (sat) (V) 3 Forward current IF A B 1.0 C 0.8 D Test condition A 120 100 B 80 0.6 60 0.4 40 0.2 20 C D E F 0 -40 -20 0 20 40 60 80 0 -40 100 Ambient temperature Ta (℃) -20 0 20 40 Ambient temperature 5 60 80 100 Ta (℃) 2014-09-22 TLP523,TLP523−2,TLP523−4 IC – VCE IC – VCE 500 300 PC Max. Sample 1 Ta = 25℃ IF = 10mA 300 2mA 100 100 2 50 (mA) 3 30 PC Max. Collector current IC Collector current IC (mA) 50 10 5 3 1 1mA 30 10 0.5mA 5 3 1 0.5 0.5 0.3 0.3 IF = 1mA Ta = 25℃ 0.1 0.1 1 0.3 10 3 0.1 0 30 0.4 0.8 Collector-emitter voltage VCE (V) Switching 90% 10% VOUT t ON OFF 100 (mA) 300 t 100 OFF(IF=1mA) 50 t 10ms※ 1s※ Collector current IC (μs) Switching time 3.2 10ms※ 1s※ 500 30 2.8 300 IF VOUT OFF(IF=10mA) 2.4 500 t t 2.0 Safe Operating Area Time RL IF 1.6 Collector-emitter voltage VCE (V) VCC = 10V Ta = 25℃ 1.2 ON(IF=1mA) 10 50 100ms※ 30 100ms※ DC operating Ta=25℃ 10 5 t 5 Single ※ ON(IF=10mA) 3 nonrepetitive 3 pulse Ta=25℃ 1 30 100 300 1k 3k 1 0.5 10k Load resistance RL (Ω) Ta=60℃ 1 3 10 30 Collector-emitter voltage VCE (V) 6 2014-09-22 TLP523,TLP523−2,TLP523−4 RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 7 2014-09-22