TLP597GA

TLP597GA TOSHIBA Photocoupler Photo Relay TLP597GA Cordless Telephone PBX Modem The TOSHIBA TLP597GA consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP597GA is a bi-directional switch can replace mechanical relays in many applications. • • • • • • • • 6 pin DIP (DIP6) 1-form-A Peak off-state voltage: 400 V (min) Trigger LED current: 3 mA (max) On-state current: 120 mA (max) On-state resistance: 35 Ω (max) Isolation voltage: 2500 Vrms (min) UL Recognized :UL1577, File No. E67349 JEDEC JEITA TOSHIBA 1 6 Unit: mm Pin Configuration (top view) 11-7A8 Weight: 0.4 g (typ.) 2 5 3 1 : ANODE 2 : CATHODE 4 : DRAIN D1 5 : SOURCE 6 : DRAIN D2 4 Schematic 1 6 2 5 4 1 2007-10-01 TLP597GA Absolute Maximum Ratings (Ta = 25°C) Characteristics Forward current Forward current derating (Ta ≥ 25°C) LED Peak forward current (100 μs pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage A connection On-state current Detector On-state current derating (Ta ≥ 25°C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min, R.H. ≤ 60%) (Note 1) B connection C connection A connection B connection C connection Tj Topr Tstg Tsol BVS ΔION/°C ION Symbol IF ΔIF/°C IFP VR Tj VOFF Rating 50 −0.5 1 5 125 400 120 120 240 −1.2 −1.2 −2.4 125 −55 to 125 −40 to 85 260 2500 °C °C °C °C Vrms mA/°C mA Unit mA mA/°C A V °C V Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device : Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6 are shorted together. Recommended Operating Conditions Characteristics Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min ― 5 ― −20 Typ. ― 7.5 ― ― Max 320 25 120 65 Unit V mA mA °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 6 LOAD AC or DC 1 6 LOAD DC 1 6 LOAD DC 2 5 2 5 2 5 3 4 3 4 3 4 A Connection B Connection C Connection 2 2007-10-01 TLP597GA Individual Electrical Characteristics (Ta = 25°C) Characteristics Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 400 V V = 0, f = 1 MHz Test Condition Min 1.0 ― ― ― ― Typ. 1.15 ― 30 ― 70 Max 1.3 10 ― 1 ― Unit V μA pF μA pF Coupled Electrical Characteristics (Ta = 25°C) Characteristics Trigger LED current Return LED current A connection On-state resistance B connection C connection RON Symbol IFT IFC Test Condition ION = 120 mA IOFF = 100 μA ION = 120 mA, IF = 5 mA ION = 20 to 120 mA, IF = 5 mA ION = 120 mA, IF = 5 mA ION = 240 mA, IF = 5 mA Min ― 0.1 ― ― ― ― Typ. 1 ― 17 20 11 6 Max 3 ― 35 40 20 ― Ω Unit mA mA Isolation Characteristics (Ta = 25°C) Characteristics Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0 V, f = 1 MHz VS = 500 V, R.H. ≤ 60% AC, 1 min Isolation voltage BVS AC, 1 s (in oil) DC, 1 min (in oil) Min ― 5 × 10 10 Typ. 0.8 10 14 Max ― ― ― ― ― Unit pF Ω Vrms Vdc 2500 ― ― ― 5000 5000 Switching Characteristics (Ta = 25°C) Characteristics Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 Ω VDD = 20 V, IF = 5 mA (Note 2) Min ― ― Typ. 0.3 0.1 Max 1 1 Unit ms ms Note 2: Switching time test circuit VDD IF VOUT 4 tON VOUT 90% 10% tOFF IF 1 2 6 RL 3 2007-10-01 TLP597GA IF – Ta 100 280 C CONNECTION 240 ION – Ta IF (mA) (mA) On-state current ION 80 200 160 120 80 40 Allowable forward current 60 A CONNECTION, B CONNECTION 40 20 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 Ambient temperature Ta (°C) Ambient temperature Ta (°C) IF – V F 100 Ta = 25°C 50 30 200 Ta = 25°C, IF = 5 mA A CONNECTION ION – VON (mA) (mA) On-state current ION 0.8 1 1.2 1.4 1.6 1.8 100 10 5 3 Forward current IF 0 1 0.5 0.3 −100 0.1 0.6 −200 −3 −2 −1 0 1 2 3 Forward voltage VF (V) On-state voltage VON (V) RON – Ta 60 ION = 120 mA t