TLP630(GB,F)

TLP630 TOSHIBA Photocoupler IRED & Photo-Transistor TLP630 Unit: mm Programmable Controllers AC / DC-Input Module Telecommunication The TOSHIBA TLP630 consists of a photo-transistor optically coupled to two infrared emitting diode connected inverse parallel in a six lead plastic DIP package. • Collector-emitter voltage: 55 V (min) • Current transfer ratio: 50% (min) • Isolation voltage: 5000 Vrms (min) • UL-recognized: UL1577, File No.E67349 Rank GB: 100% (min) TOSHIBA 11-7A8S Weight: 0.4 g (typ.) Pin Configurations (top view) Start of commercial production 1983-05 © 2019 Toshiba Electronic Devices & Storage Corporation 1 2019-06-24 TLP630 Absolute Maximum Ratings (Ta = 25°C) LED Characteristic Symbol Rating Unit Forward current IF(RMS) 60 mA Forward current derating (Ta ≥ 39°C) ΔIF / °C -0.7 mA / °C IFPT ±1 A Peak forward current (100 μs pulse, 100 pps) PD 100 mW ΔPD /°C -1.2 mW/°C Collector-emitter voltage VCEO 55 V Collector-base voltage VCBO 80 V Emitter-collector voltage VECO 7 V Emitter-base voltage VEBO 7 V Collector current IC 50 mA Power dissipation PC 150 mW ΔPC / °C -1.5 mW / °C Operating temperature range Topr -55 to 100 °C Storage temperature range Tstg -55 to 125 °C Lead soldering temperature (10 s) Tsol 260 °C Junction temperature Tj 125 °C Total package power dissipation PT 250 mW ΔPT / °C -2.5 mW / °C BVS 5000 Vrms Diode power dissipation Detector Diode power dissipation derating (Ta ≥ 39 °C) Power dissipation derating (Ta ≥ 25°C) Total package power dissipation derating (Ta ≥ 25°C) Isolation voltage (AC, 60 s, R.H. ≤ 60 %) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two terminal device: LED side pins Shorted together and DETECTOR side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage VCC ― 5 24 V Forward current IF(RMS) ― 16 25 mA Collector current IC ― 1 10 mA Topr -25 ― 85 °C Operating temperature Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. © 2019 Toshiba Electronic Devices & Storage Corporation 2 2019-06-24 TLP630 Electrical Characteristics (Ta = 25°C) Detector LED Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Forward current IF VF = 0.7 V ― 2.5 10 μA Capacitance CT V = 0 V, f = 1 MHz ― 60 ― pF Collector-emitter breakdown voltage V(BR)CEO IC = 0.5 mA 55 ― ― V Emitter-collector breakdown voltage V(BR)ECO IE = 0.1 mA 7 ― ― V Collector-base breakdown voltage V(BR)CBO IC = 0.1 mA 80 ― ― V Emitter-base breakdown voltage V(BR)EBO IE = 0.1 mA 7 ― ― V VCE = 24 V ― 10 100 nA VCE = 24 V, Ta = 85 °C ― 2 50 μA Collector dark current ICEO Collector dark current ICBO VCB = 10 V ― 0.1 ― nA Capacitance (collector to emitter) CCE V = 0 V, f = 1MHz ― 10 ― pF Unit Coupled Electrical Characteristics (Ta = 25°C) Characteristic Current transfer ratio Saturated CTR Symbol Test Condition Min Typ. Max IC / IF IF = ±5 mA, VCE = 5 V Rank GB 50 ― 600 100 ― 600 IC / IF(sat) IF = ±1 mA, VCE = 0.4 V Rank GB ― 60 ― 30 ― ― IF = ±5 mA, VCB = 5 V  10 ― μA VCE(sat) IC = 2.4 mA, IF = ±8 mA ― ― 0.4 V IC(off) VF = ±0.7 V, VCE = 24 V ― 1 10 μA 0.33 1 3 ― Base photo-current IPB Collector-emitter saturation voltage Off-state collector current CTR symmetry Note 1: IC(ratio) IC(IF = -5 mA) / IC(IF = +5 mA) (Note 1) % % I (I = I V = 5V) IC(ratio) = C2 F F2, CE IC1(IF = IF1, VCE = 5V) © 2019 Toshiba Electronic Devices & Storage Corporation 3 2019-06-24 TLP630 Isolation Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Capacitance (input to output) CS VS = 0 V, f = 1 MHz Isolation resistance RS VS = 500 V, R.H. ≤ 60 % Isolation voltage BVS AC, 60 s Min Typ. Max Unit ― 0.8 ― pF 10 ― Ω 5000 ― ― Vrms Min Typ. Max Unit ― 2 ― ― 3 ― ― 3 ― ― 3 ― 5×10 10 14 Switching Characteristics (Ta = 25°C) Characteristic Symbol Rise time tr Fall time tf Turn-on time tON Turn-off time tOFF Turn-on time tON Storage time tS Turn-off time tOFF Turn-on time tON Storage time tS Turn-off time tOFF Test Condition VCC = 10V, IC = 2mA RL = 100 Ω (Fig. 1) RL = 1.9 kΩ RBE = OPEN VCC = 5 V, IF = ±16 mA ― 2 ― ― 15 ― ― 25 ― (Fig. 1) RL = 1.9 kΩ RBE = 220 kΩ, VCC = 5 V IF = ±16 mA ― 2 ― ― 12 ― ― 20 ― μs μs μs Fig. 1: Switching time test circuit © 2019 Toshiba Electronic Devices & Storage Corporation 4 2019-06-24 TLP630 ≤ ≤ NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. © 2019 Toshiba Electronic Devices & Storage Corporation 5 2019-06-24 TLP630 NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. © 2019 Toshiba Electronic Devices & Storage Corporation 6 2019-06-24 TLP630 ICEO (μA) ICEO NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. © 2019 Toshiba Electronic Devices & Storage Corporation 7 2019-06-24 TLP630 SWITCHING TIME - RBE NOTE: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. © 2019 Toshiba Electronic Devices & Storage Corporation 8 2019-06-24 TLP630 RESTRICTIONS ON PRODUCT USE Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”. Hardware, software and systems described in this document are collectively referred to as “Product”. • TOSHIBA reserves the right to make changes to the information in this document and related Product without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative or contact us via our website. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. https://toshiba.semicon-storage.com/ © 2019 Toshiba Electronic Devices & Storage Corporation 9 2019-06-24