TLP747GF_07

TLP747GF TOSHIBA Photocoupler GaAs Ired & Photo−Thyristor TLP747GF Office Machine Switching Power Supply The TOSHIBA TLP747GF consists of a photo−thyristor optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP. All parameters are tested to the specification of TLP747G. (both condition and limits) • • • • • Peak off−state voltage: 400V min. Trigger LED current: 15mA max. On−state current: 150mA max. UL recognized: UL1577, file no. E67349 BSI approved: BS EN60065: 2002 Certificate no. 7364 BS EN60950-1: 2002 Certificate no. 7365 • • • SEMCO approved:EN60065,EN60950-1,EN60335-1 Certificate no.302586 Isolation voltage: 4000Vrms min. Option (D4) type VDE approved: DIN EN 60747-5-2, Certificate no.40009373 Maximum operating insulation voltage: 890, 1130VPK Highest permissible over voltage: 6000, 8000VPK TOSHIBA Weight: 0.42 g 11−7A802 Unit in mm (Note) When an EN 60747-5-2 approved type is needed, please designate the “ Option (D4) ” • Creepage distance: 8.0mm (min.) Clearance: 8.0mm (min.) Internal creepage path: 4.0mm (min.) Insulation thickness: 0.5mm (min.) • Conforming safety standards: DIN 57 804. VDE0804 / 1.83 DIN IEC65 / VDE0860 / 8.81 DIN IEC380 / VDE0806 / 8.81 DIN IEC435 / VDE0805 / draft nov. 84 DIN IEC601T1 / VDE0750T1 / 5.82 BS7002: 1989 (EN60950) Pin Configuration (top view) 1 2 3 6 5 4 1 : ANODE 2 : CATHODE 3 : NC 4 : CATHODE 5 : ANODE 6 : GATE 1 2007-10-01 RESTRICTIONS ON PRODUCT USE 20070701-EN TLP747GF • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA2007-10-01 for any infringements of patents or other rights of the third parties which may result from its use. No license is 2