TPC6102

TPC6102 TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOSII) TPC6102 Notebook PC Applications Portable Equipment Applications • • • • Low drain-source ON resistance: RDS (ON) = 48 mΩ (typ.) High forward transfer admittance: |Yfs| = 6 S (typ.) Low leakage current: IDSS = −10 μA (max) (VDS = −30 V) Enhancement mode: Vth = −0.8 to −2.0 V (VDS = −10 V, ID = −1 mA) Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 kΩ) Gate-source voltage Drain current Drain power dissipation Drain power dissipation DC (Note 1) Symbol VDSS VDGR VGSS ID IDP PD PD EAS IAR (Note 4) EAR Tch Tstg Rating −30 −30 ±20 −4.5 −18 2.2 0.7 3.3 −2.25 0.22 150 −55 to 150 Unit V V V A W W mJ A mJ °C °C Pulse (Note 1) (t = 5 s) (Note 2a) (t = 5 s) (Note 2b) JEDEC JEITA TOSHIBA ― ― 2-3T1A Single pulse avalanche energy (Note 3) Avalanche current Repetitive avalanche energy Channel temperature Storage temperature range Weight: 0.011 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristics Thermal resistance, channel to ambient (t = 5 s) (Note 2a) Thermal resistance, channel to ambient (t = 5 s) (Note 2b) Symbol Rth (ch-a) Rth (ch-a) Max 56.8 178.5 Unit °C/W °C/W Circuit Configuration 6 5 4 Note: (Note 1), (Note 2), (Note 3), (Note 4) and (Note 5): See the next page. This transistor is an electrostatic- ensitive device. Please handle with caution. 1 2 3 1 2006-11-16 TPC6102 Electrical Characteristics (Ta = 25°C) Characteristics Gate leakage current Drain cut-OFF current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-ON time Switching time Fall time Turn-OFF time Total gate charge (gate-source plus gate-drain) Gate-source charge Gate-drain (“miller”) charge tf toff Qg Qgs Qgd Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth RDS (ON) RDS (ON) |Yfs| Ciss Crss Coss tr VGS ton 0V −10 V 4.7 Ω VDS = −10 V, VGS = 0 V, f = 1 MHz Test Condition VGS = ±16 V, VDS = 0 V VDS = −30 V, VGS = 0 V ID = −10 mA, VGS = 0 V ID = −10 mA, VGS = 20 V VDS = −10 V, ID = −1 mA VGS = −4.5 V, ID = −2.2 A VGS = −10 V, ID = −2.2 A VDS = −10 V, ID = −2.2 A Min ⎯ ⎯ −30 −15 −0.8 ⎯ ⎯ 3.0 ⎯ ⎯ ⎯ ⎯ ID = −2.2 A VOUT RL = 6.8 Ω ⎯ ⎯ ⎯ ⎯ VDD ∼ −24 V, VGS = −10 V, − ID = −4.5 A ⎯ ⎯ Typ. ⎯ ⎯ ⎯ ⎯ ⎯ 78 48 6.0 500 110 150 3 7 31 79 11 8.5 2.5 Max ±10 −10 ⎯ ⎯ −2.0 100 60 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ns ⎯ ⎯ ⎯ ⎯ ⎯ nC pF Unit μA μA V V mΩ S VDD ∼ −15 V − < 1%, tw = 10 μs Duty = Source-Drain Ratings and Characteristics (Ta = 25°C) Characteristics Pulse drain reverse current Forward voltage (diode) (Note 1) Symbol IDRP VDSF Test Condition ⎯ IDR = −4.5 A, VGS = 0 V Min ⎯ ⎯ Typ. ⎯ ⎯ Max −18 1.2 Unit A V 2 2006-11-16 TPC6102 Marking (Note 5) Lot code (month) Lot No. Part No. (or abbreviation code) S3B Product-specific code Lot code (year) A line indicates lead (Pb)-free package or lead (Pb)-free finish. Pin #1 Note 1: Ensure that the channel temperature does not exceed 150°C. Note 2: (a) Device mounted on a glass-epoxy board (a) (t = 5 s) (b) Device mounted on a glass-epoxy board (b) (t = 5 s) FR-4 25.4 × 25.4 × 0.8 Unit: (mm) FR-4 25.4 × 25.4 × 0.8 Unit: (mm) (a) (b) Note 3: VDD = −24 V, Tch = 25°C (initial), L = 0.5 mH, RG = 25 Ω, IAR = −2.25 A Note 4: Repetitive rating: pulse width limited by maximum channel temperature Note 5: • on lower left of the marking indicates Pin 1. 3 2006-11-16 TPC6102 ID – VDS −5 −10 −4 −4.5 −4 −3.5 −3 −3 −10 −10 −6 −8 −4 −3.5 ID – VDS −3 Drain current ID (A) Drain current ID (A) −2.8 −6 −2.6 −4 −2.4 VGS = −2.2 V Common source Ta = 25°C Pulse test −1 −2 −3 −4 −5 −2.8 −2.6 −2 −2.4 VGS = −2.2 V Common source Ta = 25°C Pulse test −0.1 −0.2 −0.3 −0.4 −0.5 −1 −2 0 0 0 0 Drain-source voltage VDS (V) Drain-source voltage VDS (V) ID – VGS −12 Common source VDS = −10 V Pulse test −0.8 −0.7 −0.6 −0.5 −0.4 −0.3 −0.2 −0.1 0 0 VDS – VGS Common source Ta = 25°C Pulse test Drain current ID (A) −8 Ta = −55°C 100°C −6 25°C Drain-source voltage VDS (V) −10 ID = −4.5 A −4 −2 −2.2 A −1.1 A −2 −4 −6 −8 −10 0 0 −0.5 −1 −1.5 −2 −2.5 −3 −3.5 Gate-source voltage VGS (V) Gate-source voltage VGS (V) |Yfs| – ID 100 Common source VDS = −10 V Pulse test 1000 Common source Ta = 25°C Pulse test RDS (ON) – ID Forward transfer admittance ⎪Yfs⎪ (S) 30 Drain-source on resistance RDS (ON) (mΩ) 300 10 Ta = −55°C 25°C 100°C 100 −4.5 V VGS = −10 V 30 3 1 −1 −3 −5 −10 −30 −50 −100 10 −0.1 −0.3 −1 −3 −10 −30 −100 Drain current ID (A) Drain current ID (A) 4 2006-11-16 TPC6102 RDS (ON) – Ta 140 120 Common source Pulse test −2.2 A −4.5 A ID = −1.1 A 80 60 40 VGS = −10 V 20 0 −80 ID = −1.1 A −2.2 A VGS = −4.5 V −4.5 A −100 IDR – VDS Common source Ta = 25°C Pulse test −5 V −10 −10 V Drain-source on resistance RDS (ON) (mΩ) Drain reverse current IDR 100 (A) −30 −3 −3 V −1 −1 V −0.3 VGS = −0 V −40 0 40 80 120 160 −0.1 0 0.2 0.4 0.6 0.8 1 1.2 Ambient temperature Ta (°C) Drain-source voltage VDS (V) Capacitance – VDS 1000 −2 Vth – Ta Common source VGS = −10 V ID = −1 mA Pulse test Ciss Vth (V) Gate threshold voltage −1.6 (pF) 300 Capacitance C −1.2 100 Coss Crss −0.8 30 Common source VGS = 0 V f = 1 MHz Ta = 25°C 10 −0.1 −0.3 −3 −30 −0.4 −1 −10 −100 0 −80 −40 0 40 80 120 160 Drain-source voltage VDS (V) Ambient temperature Ta (°C) PD – Ta 2.5 (1) t = 5 s (1) Device mounted on a glass-epoxy board (a) (Note 2a) (2) Device mounted on a glass-epoxy board (b) (Note 2b) (1) DC 1 (2) t = 5 s 0.5 (2) DC 0 0 −40 Dynamic input/output characteristics Common source ID = −4.5 A Ta = 25°C Pulse test VDD = −24 V VDS −16 −12 V −6 V −12 VDD = −24 V Drain power dissipation PD (W) VDS (V) 2 −30 Drain-source voltage −20 −12 V −10 −8 VGS −4 −6 V 40 80 120 160 0 0 4 8 12 16 0 20 Ambient temperature Ta (°C) Total gate charge Qg (nC) 5 2006-11-16 Gate-source voltage 1.5 VGS (V) TPC6102 rth − tw 1000 Transient thermal impedance rth (°C/W) 300 100 Device mounted on a glassepoxy board (b) (Note 2b) 30 10 Device mounted on a glassepoxy board (a) (Note 2a) 3 1 0.3 Single pulse 0.1 0.001 0.01 0.1 1 10 100 1000 Pulse tw (s) Safe operating area −100 −30 ID max (pulse)* −10 −3 10 ms* 1 m s* Drain current ID (A) −1 −0.3 −0.1 −0.03 −0.01 *: Single pulse Ta = 25°C −0.003 Curves must be derated linearly with increase in temperature −0.001 −0.01 −0.03 −0.1 −0.3 −1 VDSS max −3 −10 −30 −100 Drain-source voltage VDS (V) 6 2006-11-16 TPC6102 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2006-11-16