TPC8212-H(TE12LQ,M

TPC8212-H TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (Ultra-High-Speed U-MOSIII) TPC8212-H High-Efficiency DC/DC Converter Applications Notebook PC Applications Portable-Equipment Applications • Small footprint due to small and thin package • High-speed switching • Small gate charge: QSW = 5.5 nC (typ.) • Low drain-source ON-resistance: RDS (ON) = 16 mΩ (typ.) • High forward transfer admittance: |Yfs| =14 S (typ.) • Low leakage current: IDSS = 10 μA (max) (VDS = 30 V) • Enhancement mode: Vth = 1.1 to 2.3 V (VDS = 10 V, ID = 1 mA) Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Drain−source voltage VDSS 30 V Drain−gate voltage (RGS = 20 kΩ) VDGR 30 V Gate−source voltage VGSS ±20 V JEDEC ― A JEITA ― Drain current DC (Note 1) ID 6 Pulse (Note 1) IDP 24 PD (1) 1.5 Single-device operation (Note 3a) Drain power dissipation Single-device value (t = 10 s) (Note 2a) at dual operation (Note 3b) TOSHIBA W PD (2) 1.1 PD (1) 0.75 PD 2) 0.45 Single-pulse avalanche energy (Note 4) EAS 46.8 mJ Avalanche current IAR 6 A Repetitive avalanche energy (Note 2a, Note 3b, Note 5) EAR 0.10 mJ Channel temperature Tch 150 ℃ Storage temperature range Tstg −55～150 ℃ Single-device Drain power operation (Note 3a) dissipation Single-device value (t = 10 s) (Note 2b) at dual operation (Note 3b) 2-6J1E Weight: 0.085 g (typ.) Circuit Configuration W Note: For Notes 1 to 5, refer to the next page. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). This transistor is an electrostatic-sensitive device. Handle with care. 1 2006-11-16 TPC8212-H Thermal Characteristics Characteristic Single-device operation (Note 3a) Thermal resistance, channel to ambient (t = 10 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation (Note 3a) Thermal resistance, channel to ambient (t = 10 s) (Note 2b) Single-device value at dual operation (Note 3b) Symbol Max Rth (ch-a) (1) 83.3 Rth (ch-a) (2) 125 Rth (ch-a) (1) 167 Rth (ch-a) (2) 278 Unit °C/W Marking TPC8212 H Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Note 1: The channel temperature should not exceed 150°C during use. Note 2: a) Device mounted on a glass-epoxy board (a) b) Device mounted on a glass-epoxy board (b) FR-4 25.4 × 25.4 × 0.8 (unit: mm) FR-4 25.4 × 25.4 × 0.8 (unit: mm) (a) (b) Note 3: a) The power dissipation and thermal resistance values are shown for a single device (During single-device operation, power is only applied to one device.) b) The power dissipation and thermal resistance values are shown for a single device (During dual operation, power is evenly applied to both devices.) Note 4: VDD = 24 V, Tch = 25°C (Initial), L = 1.0 mH, RG = 25 Ω, IAR = 6.0 A Note 5: Repetitive rating: pulse width limited by maximum channel temperature Note 6: • on the lower left of the marking indicates Pin 1. * Weekly code: (three digits) Week of manufacture (01 for first week of year, continuing up to 52 or 53) Year of manufacture (the last digit of the calendar year) 2 2006-11-16 TPC8212-H Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Gate leakage current IGSS VGS = ±16 V, VDS = 0 V — — ±10 μA Drain cutoff current IDSS VDS = 30 V, VGS = 0 V — — 10 μA V (BR) DSS ID = 10 mA, VGS = 0 V 30 — — V V (BR) DSX Drain-source breakdown voltage ID = 10 mA, VGS = −20 V 15 — — Vth VDS = 10 V, ID = 1 mA 1.1 — 2.3 RDS (ON) VGS = 4.5 V, ID = 3 A — 21 27 RDS (ON) VGS = 10 V , ID = 3 A — 16 21 Forward transfer admittance |Yfs| VDS = 10 V , ID = 3 A 7 14 — Input capacitance Ciss — 840 — Reverse transfer capacitance Crss — 105 — Output capacitance Coss — 385 — tr — 5 — ton — 11 — Gate threshold voltage Drain-source ON-resistance Rise time Turn-on time VDS = 10 V, VGS = 0 V, f = 1 MHz Switching time V mΩ S pF ns Fall time Turn-off time Total gate charge (gate-source plus gate-drain) (Note 7) tf — 7 — toff — 25 — VDD ∼ − 24 V, VGS = 10 V, ID = 6 A ⎯ 16 ⎯ VDD ∼ − 24 V, VGS = 5 V, ID = 6 A ⎯ 9 ⎯ ⎯ 3.1 ⎯ ⎯ 4.1 ⎯ ⎯ 5.5 ⎯ Qg Gate-source charge 1 Qgs1 Gate-drain (“Miller”) charge Qgd Gate switch charge QSW VDD ∼ − 24 V, VGS = 10 V, ID = 6 A nC Source−Drain Ratings and Characteristics (Ta = 25°C) Characteristic Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol Test Condition Min Typ. Max Unit IDRP — — — 24 A — — −1.2 V VDSF IDR = 6 A, VGS = 0 V 3 2006-11-16 TPC8212-H ID – VDS ID – VDS 10 3.4 6 ID Drain current 8 (A) Common source Ta = 25°C Pulse test 3.3 3 3.2 2 1 0 0 10 3.5 (A) 4 4 ID 8 10 Drain current 5 VGS = 3V 0.2 0.4 0.6 0.8 Drain-source voltage VDS Common source Ta =25°C Pulse test 6 3.6 8 3.5 6 4 3.3 2 0 0 1 4 (V) VGS = 3.1V 0.4 0.8 ID – VGS Common source (V) Pulse test VDS (A) 100 Drain-source voltage ID Drain current VDS = 10 V Ta = −55°C 4 25 2 1 2 4 3 Gate-source voltage VGS Ta = 25℃ Pulse test 0.2 ID = 6 A 0.1 3 1.5 0 0 5 (V) 4 6 8 VGS 10 (V) RDS (ON) – ID 100 Drain-source ON-resistance RDS (ON) (mΩ) |Yfs| (S) ⎪Yfs⎪ – ID Forward transfer admittance 2 Gate-source voltage 100 Ta = −55°C 25 100 1 Common source 4.5 10 VGS = 10 V Common source Ta = 25°C VDS = 10 V 0.1 0.1 (V) VDS – VGS 6 10 VDS 2 0.3 Common source 0 0 1.6 Drain-source voltage 10 8 1.2 Pulse test 1 Drain current 10 ID 1 0.1 100 (A) Pulse test 1 Drain current 4 10 ID 100 (A) 2006-11-16 TPC8212-H RDS (ON) – Ta 100 50 Common source Ta = 25°C Pulse test Pulse test 40 Drain reverse current IDR (A) Drain-source ON-resistance RDS (ON) (mΩ) Common source IDR – VDS ID = 1.5A,3A,6A 30 VGS = 4.5 V 20 ID = 1.5A,3A,6A VGS = 10 V 10 10 3 10 4.5 1 VGS = 0 V 0 −80 −40 0 40 80 Ambient temperature 120 Ta 1 0 160 −0.2 (°C) −0.4 Capacitance – VDS VDS (V) 80 120 −1.2 Vth – Ta 2.0 1000 Gate threshold voltage Vth (V) Ciss Coss Crss 100 Common source VGS = 0 V f = 1 MHz 1.5 1.0 Common source VDS = 10 V 0.5 ID = 1 mA Pulse test Ta = 25°C 1 10 Drain-source voltage 0 −80 100 VDS −40 (V) 1.2 0.8 (2) (3) (4) 0.4 0 0 40 80 Ambient temperature (°C) 120 Ta 50 20 40 16 (V) (V) Device mounted on a Glass-epoxy board (a)(Note 2a) (1)Single-device operation (Note 3a) (2)Single-device value at dual operation(Note 3b) Device mounted on a glass-epoxy board(b)(Note 2b) (3)Single-device operation(Note 3a) (4)Single-device value at dual operation(Note 3b) t=10s VDS (1) Ta 160 Dynamic input/output characteristics Drain-source voltage 1.6 40 Ambient temperature PD – Ta 2 0 VDD = 6 V 30 12 VDS 12 24 20 5 8 ID = 6 A VGS Ta = 25°C 4 Pulse test 6 12 Total Gate charge (°C) Common source 10 0 0 160 VGS 10 0.1 18 Qg 24 Gate-source voltage (pF) −1.0 2.5 C Capacitance −0.8 Drain-source voltage 10000 Drain power dissipation PD (W) −0.6 0 30 (nC) 2006-11-16 TPC8212-H rth – tw 1000 Single - pulse (4) Transient thermal impedance rth (℃/W) (3) (2) 100 (1) 10 Device mounted on a glass-epoxy board (a) (note 2a) (1)Single-device opration (Note 3a) (2)Single-device value at dual opration (Note 3b) 1 Device mounted on a glass-epoxy board (b) (Note 2b) (3)Single-device opration (Note 3a) (4)Single-device value at dual opration (Note 3b) 0.1 0.001 0.01 0.1 1 Pulse width 10 tw 100 1000 (s) Safe operating area 100 Single-device value at dual opration (note 3b) Drain current ID (A) ID max (Pulse) * t =1ms * 10 10ms * 1 * Single - pulse Ta=25℃ Curves must be derated linearly with increase in temperature. 0.1 0.1 1 Drain-source voltage VDSS max 10 VDS 100 (V) 6 2006-11-16 TPC8212-H RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2006-11-16