TPCF8302

TPCF8302 TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOS IV) TPCF8302 Notebook PC Applications Portable Equipment Applications • • • • Low drain-source ON resistance: RDS (ON) = 44 mΩ (typ.) High forward transfer admittance: |Yfs| = 6.2 S (typ.) Low leakage current: IDSS = −10 μA (max) (VDS = −20 V) Enhancement mode: Vth = −0.5 to −1.2 V (VDS = −10 V, ID = −200 μA) Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 kΩ) Gate-source voltage Drain current DC Pulse (Note 1) (Note 1) Symbol VDSS VDGR VGSS ID IDP PD (1) PD (2) PD (1) PD (2) EAS IAR EAR Tch Tstg Rating −20 −20 ±10 −3.0 −12 1.35 1.12 W 0.53 0.33 0.58 −1.5 0.11 150 −55~150 mJ A mJ °C °C Unit V V V A JEDEC JEITA TOSHIBA ― ― 2-3U1B Drain power dissipation (t = 5 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation (Note 3a) Weight: 0.011 g (typ.) Circuit Configuration 8 7 6 5 Single-device operation Drain power (Note 3a) dissipation (t = 5 s) (Note 2b) Single-device value at dual operation (Note 3b) Single pulse avalanche energy Avalanche current Repetitive avalanche energy Single-device value at dual operation (Note 2a, 3b, 5) Channel temperature Storage temperature range (Note 4) 1 2 3 4 Note: (Note 1), (Note 2), (Note 3), (Note 4), (Note 5) and (Note 6): See the next page. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). This transistor is an electrostatic-sensitive device. Please handle with caution. 1 2006-11-16 TPCF8302 Thermal Characteristics Characteristics Single-device operation Thermal resistance, (Note 3a) channel to ambient (t = 5 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation Thermal resistance, (Note 3a) channel to ambient (t = 5 s) (Note 2b) Single-device value at dual operation (Note 3b) Symbol Rth (ch-a) (1) Rth (ch-a) (2) Rth (ch-a) (1) Rth (ch-a) (2) Max 92.6 °C/W 111.6 235.8 °C/W 378.8 Unit Marking (Note 6) Lot code (month) Lot No. Part No. (or abbreviation code) F5B Product-specific code Lot code (year) A line indicates lead (Pb)-free package or lead (Pb)-free finish. Pin #1 Note 1: Ensure that the channel temperature does not exceed 150℃. Note 2: (a) Device mounted on a glass-epoxy board (a) 25.4 (b) Device mounted on a glass-epoxy board (b) FR-4 25.4 × 25.4 × 0.8 (unit: mm) FR-4 25.4 × 25.4 × 0.8 (unit: mm) (a) 25.4 (b) Note 3: a) The power dissipation and thermal resistance values are shown for a single device (During single-device operation, power is only applied to one device.). b) The power dissipation and thermal resistance values are shown for a single device (During dual operation, power is evenly applied to both devices.). Note 4: VDD = −16 V, Tch = 25°C (initial), L = 0.5 mH, RG = 25 Ω, IAR = −1.5 A Note 5: Repetitive rating: pulse width limited by maximum channel temperature Note 6: ● on the lower left of the marking indicates Pin 1. 2 2006-11-16 TPCF8302 Electrical Characteristics (Ta = 25°C) Characteristics Gate leakage current Drain cut-off current Drain-source breakdown voltage Gate threshold voltage Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth RDS (ON) Drain-source ON resistance RDS (ON) RDS (ON) Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-on time Switching time Fall time Turn-off time Total gate charge (gate-source plus gate-drain) Gate-source charge1 Gate-drain (“miller”) charge tf toff Qg Qgs1 Qgd |Yfs| Ciss Crss Coss tr VGS ton 0V −5 V 4.7 Ω ID = −1.5 A VOUT RL = 6.7 Ω VDS = −10 V, VGS = 0 V, f = 1 MHz Test Condition VGS = ±10V, VDS = 0 V VDS = −20 V, VGS = 0 V ID = −10 mA, VGS = 0 V ID = −10 mA, VGS = 10 V VDS = −10 V, ID = −200 μA VGS = −2.0 V, ID = −1.5 A VGS = −2.5 V, ID = −1.5 A VGS = −4.5 V, ID = −1.5 A VDS = −10 V, ID = −1.5 A Min ⎯ ⎯ −20 −10 −0.5 ⎯ ⎯ ⎯ 3.1 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Typ. ⎯ ⎯ ⎯ ⎯ ⎯ 100 68 44 6.2 800 120 160 6.2 15 17 51 11 1.1 3.3 Max ±10 −10 ⎯ ⎯ −1.2 200 95 59 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ns ⎯ ⎯ ⎯ ⎯ ⎯ nC pF S mΩ Unit μA μA V V VDD ∼ −10 V − < 1%, tw = 10 μs Duty = VDD ∼ −16 V, VGS = −5 V, − ID = −3 A Source-Drain Ratings and Characteristics (Ta = 25°C) Characteristics Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol IDRP VDSF Test Condition ⎯ IDR = −3.0 A, VGS = 0 V Min ⎯ ⎯ Typ. ⎯ ⎯ Max −12 1.2 Unit A V 3 2006-11-16 TPCF8302 ID – VDS -5 -10 -4 -6 -2.5 -3.0 -2.0 -1.8 -10 -10 -2.5 -3.0 -8 ID – VDS Common source Ta = 25°C Pulse Test -2.0 -6 -1.8 -4 -1.6 -2 VGS = -1.4 VGS = -1.4 V 0 0 ID (A) -3 Common source Ta = 25°C Pulse Test Drain current -2 -1.6 -1 0 0 -0.2 -0.4 -0.6 -0.8 Drain current ID (A) -6 -1.0 -1.0 -2.0 -3.0 -4.0 -5.0 Drain-source voltage VDS (V) Drain-source voltage VDS (V) ID – VGS -5 Common source -4 -2.0 VDS – VGS Common source (V) VDS = -10 V Pulse Test Ta = 25℃ -1.6 Pulse Test (A) ID -2 Ta = −55°C -1 100 25 0 0 Drain-source voltage -3 VDS -1.2 -0.8 Drain current -0.4 -0.75 -1.5 ID = -3A -1 -2 -3 0 0 -2 -4 -6 -8 -10 Gate-source voltage VGS (V) Gate-source voltage VGS (V) ⎪Yfs⎪ – ID 100 1000 Common Source Ta = 25°C Pulse Test RDS (ON) – ID Forward transfer admittance ⎪Yfs⎪ (S) 10 Ta = −55°C Drain-source ON resistance RDS (ON) (mΩ) VGS = -2.0V 100 -2.5 -4.5 100 25 1 Common Source VDS = -10 V 0.1 0.1 Pulse Test -1 -10 10 0.1 -1 -10 Drain current ID (A) Drain current ID (A) 4 2006-11-16 TPCF8302 RDS (ON) – Ta 160 Common Source Pulse Test ID = -3A -10 -10 IDR – VDS -3.0 -5.0 -3 Drain reverse current IDR (A) -5 -1.0 VGS = 0 V -1 -0.5 -0.3 Common Source Ta = 25°C Pulse Test -0.1 0 Drain-source ON resistance RDS (ON) (m Ω) 120 VGS = -2.0V -1.5A,-0.75A 80 VGS = -2.5V ID = -3A,-1.5A,-0.75A 40 ID = -3A,-1.5A,-0.75A VGS = -4.5V 0 −80 −40 0 40 80 120 160 0.2 0.4 0.6 0.8 1.0 1.2 Ambient temperature Ta (°C) Drain-source voltage VDS (V) Capacitance – VDS 10000 -2.0 Vth – Ta -1.6 (pF) 1000 Ciss Gate threshold voltage Vth (V) Capacitance C -1.2 Coss 100 Common Source VGS = 0 V f = 1 MHz Ta = 25°C 10 -0.1 -1 -3 -5 -10 -30 -50 -100 Crss -0.8 Common Source -0.4 VDS = -10 V ID = -200μA Pulse Test 0 −80 −40 0 40 80 120 160 Drain-source voltage VDS (V) Ambient temperature Ta (°C) PD – Ta 2.0 Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) Dynamic input / output characteristics -20 -10 (V) 1.6 Device mounted on a glass-epoxy board (b) (Note 2b) -16 Drain power dissipation PD (W) (4) Single-device value at dual operation (Note 3b) Drain-source voltage (2) 0.8 (3) 0.4 (4) 0 0 -8 -8 -16 -8 Common source -4 -4 -4 ID = -3 A Ta = 25°C Pulse Test -2 40 80 120 160 200 0 0 4 8 12 0 16 Ambient temperature Ta (°C) Total gate charge Qg (nC) 5 2006-11-16 Gate-source voltage 1.2 ｔ＝5S VDS (1) (3) Single-device operation (Note 3a) VDD = -16V -12 VDD=-4V VGS -8 -6 VGS (V) (2) Single-device value at dual operation (Note 3b) VDS TPCF8302 rth – tw 1000 Single pulse (4) (3) (2) Transient thermal impedance rth (°C/W) 100 (1) 10 Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) 1 0.001 0.01 0.1 1 10 100 1000 Pulse width tw (s) Safe Operating Area 100 (A) ID max (pulse) * 10 1 ms * 100 μs * Drain current ID 1 ※ Single pulse Ta=25℃ Curves must be derated linearly with increase in temperature. 0.1 0.1 VDSS max 10 100 1 Drain-source voltage VDS (V) 6 2006-11-16 TPCF8302 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2006-11-16