TPS610

TPS610(F) TOSHIBA Phototransistor Silicon NPN Epitaxial Planar TPS610(F) Lead(Pb)-Free Photoelectric Counter Various Kinds Of Readers Position Detection • • • φ5mm epoxy resin package High sensitivity: IL = 250μA(typ.) Half value angle: θ1/2 = ±8° (typ.) Unit in mm Absolute Maximum Ratings (Ta = 25°C) Characteristic Collector−emitter voltage Emitter−collector voltage Collector Current Collector power dissipation Collector power dissipation derating (Ta>25°C) Operating temperature range Storage temperature range Symbol VCEO VECO IC PC ΔPC / °C Topr Tstg Rating 30 5 50 −150 −2 −20~75 −30~100 Unit V V mA mW mW / °C °C °C TOSHIBA Weight: 0.3g (typ.) 0−5C1 Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Pin Connection 2 1 1 . Emitter 2 . Collector Opto−Electrical Characteristics (Ta = 25°C) Characteristic Dark current Light current Collector− emitter saturation voltage Switching time Rise time Fall time Symbol ID (ICEO) IL VCE (sat) tr tf λP Test Condition VCE = 24V, E = 0 VCE = 3V, E = 0.1mW / cm 2 Min. ― (Note) 2 Typ. 0.005 250 0.25 6 6 800 ±8 Max. 0.1 ― 0.4 ― ― ― ― Unit μA μA V μs nm ° 100 ― ― ― ― ― IC = 50μA, E = 0.1mW / cm VCC = 5V, IC = 2mA RL = 100Ω ― ― (Note) Peak sensitivity wavelength Half value angle 1 θ 2 Note: Color temperature = 2870K, standard tungsten lamp 1 2007-10-01 TPS610(F) Precaution Please be careful of the followings. 1. Soldering shall be performed at the top portion from the lead stopper. 2. Soldering temperature: 260°C max. Soldering time: 5s max. 3. When the lead is formed, the lead shall be formed at the top portion of the stopper without leaving forming stress to the body of the device. Soldering shall be performed after lead forming. 2 2007-10-01 TPS610(F) Fig.1 Switching time test circuit Input TLN110(F) R VCC TPS610(F) Output RL Output pulse 0 tr tf 10% Input pulse 0 90% PC – Ta 160 10 2 ID – Ta E =0 10 (typ.) VCE = 24 V Allowable collector power dissipation PC (mW) Dark current ID (µA) 20 40 60 80 100 120 1 80 10−1 10−2 40 10−3 0 0 1 0 −4 0 20 40 60 80 Ambient temperature Ta (°C) Ambient temperature Ta (°C) IL – E 50 VCE = 3 V 30 Ta = 25°C Color temperature = 2870K (typ.) 200 100 Spectral Response Ta = 25 °C (typ.) Light current IL (mA) 10 5 3 (%) Relative sensitivity 50 30 10 5 3 1 0.5 0.3 0.1 0.1 0.3 1 3 10 2 30 1 400 600 800 1000 1200 Radiant incidence E (mW/cm ) Wavelength λ (nm) 3 2007-10-01 TPS610(F) Directional Sensitivity Characteristic (typ.) (Ta = 25°C) 12 8 4 0 -4 -8 -12 Frequency Characteristics (typ.) VCC = 5 V Ta = 25°C Light source = TLN110(F) 30° 40° 50° 60° 70° 80° 90° 1.0 0.8 0.6 0.4 0.2 0 30° 40° 50° 60° 70° 80° 90° Relative output 20° 10° 0° 10° 20° (dB) Radiation Angle RL=100Ω 500Ω 1 kΩ -16 -20 1 3 10 30 100 300 1000 Relative sensitivity Frequency f (kHz) Switching Characteristics (typ.) 30 Ta=25°C Input TLN110(F) VCC 10V Output RL tr tf Output pulse Input pulse td 90% 10% Coupling Characteristics With TLN110(F) TLN110(F) IE = 50mW/sr (mA) Collector current IC Switching time (µs) R 10 200 100 50 30 tr (RL=10kΩ) 5 3 10 Ta = 25°C TPS610(F) Using sample 1 :IL = 150μA at VCE = 3V E = 0.1mW/cm2 0.5 0.3 TLN110(F) d 30 tf (RL=10kΩ) tr (RL=1kΩ) 10 td (RL=10kΩ) 3 td (RL=100Ω,1kΩ) tf (RL=100Ω) tr (RL=100Ω) 1 0.02 0.1 0.3 5 tf (RL=1kΩ) IC 3V TPS610(F) 1 3 10 0.1 1 3 5 10 30 50 100 Collector current IC (mA) Distance d (mm) 4 2007-10-01 TPS610(F) RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN GENERAL • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2007-10-01