TPS622F

TPS622(F) TOSHIBA Phototransistor Silicon NPN Epitaxial Planar TPS622(F) Lead(Pb)-Free Opto-electronic Switch Optical Mouse Optical Touch Switch • • • • • Compact side view epoxy resin package High response speed: tr, tf = 6μs (typ.) Half value angle: θ1/2 = ±15° (typ.) Visible light cut type (black package) Optimum in combination with infrared LED TLN117(F) with identical external dimensions. Unit in : mm Absolute Maximum Ratings (Ta = 25°C) Characteristic Collector−emitter voltage Emitter−collector voltage Collector current Collector power dissipation Collector power dissipation derating (Ta > 25°C) Operating temperature range Storage temperature range Soldering temperature (5s) Symbol VCEO VECO IC PC ΔPC / °C Topr Tstg Tsol Rating 30 5 50 75 −1 −25~85 −40~100 260 (Note 1) Unit V V mA mW mW / °C °C °C °C TOSHIBA 0 – 3G1 Weight: 0.1 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Soldering portion of lead: At least 2mm from the body of the device. Opto-electrical Characteristics (Ta = 25°C) Characteristic Dark current Light current Collector−emitter saturation voltage Peak sensitivity wavelength Half value angle Switching time Rise time Fall time Symbol ID(ICEO) IL VCE(sat) λP Test Condition VCE = 24V, E = 0 E = 0.1mW / cm , VCE = 3V E = 0.1mW / cm , IL = 1 5 μ A ⎯ ⎯ VCC = 5V, IC = 2mA RL = 100Ω 2 2 Min. ⎯ Typ. 0.005 70 0.15 870 ±15 6 6 Max. 0.1 ⎯ 0.4 ⎯ ⎯ ⎯ ⎯ Unit μA μA V nm ° μs (Note 2,3) 27 ⎯ ⎯ ⎯ ⎯ ⎯ 1 θ 2 tr tf 1 2007-10-01 TPS622(F) Note 2: Color temperature = 2870K standard tungsten lamp Note 3: IL classification Pin Connection Rank (A) (B) ⎯ IL (μA) 27~80 55~165 27min. 2. Collector 1. Emitter Precaution Take particular care with the following: 1. Lead forming should be carried out at least 2 mm from the body of the device without applying forming stress to the plastic. Soldering should be performed after lead forming. 2 2007-10-01 TPS622(F) PC - Ta 80 1200 IL - VCE (low voltage region) (typ.) Ta = 25°C 1.0 1000 Allowable power dissipation PC (mW) Light current IL (μA) 60 0.8 800 0.6 600 0.4 400 E=0.2mW/cm2 200 40 20 0 0 20 40 60 80 100 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Ambient temperature Ta (°C) Collector-emitter voltage VCE (V) IL - E 10000 VCE = 3 V Ta = 25°C (typ.) 1200 1.0 1000 0.9 IL - VCE 0 .8 0.7 0.6 0.5 600 0.4 0.3 0.2 200 E=0.1mW/cm2 (typ.) Ta = 25°C Light current IL (μA) 1000 Light current IL (μA) 800 100 400 10 0.01 0.1 1 10 0 0 2 4 6 8 10 12 14 Radiant incidence E (mW/cm ) 2 Collector-emitter voltage VCE (V) Spectral Response 100 Ta = 25°C (typ.) Directional Sensitivity Characteristic (typ.) Ta = 25°C (%) 80 Radiation angle 30° 60 50° 40 60° 70° 20 80° 90° 1.0 200 400 600 800 1000 1200 40° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° Relative sensitivity 0 0 0.8 0.6 0.4 0.2 0 Relative sensitivity Wavelength λ (nm) 3 2007-10-01 TPS622(F) Switching Characteristics (saturated operation) 10000 Ta = 25°C LED : TLN117 VCC = 5V VOUT ≧ 4.6V (typ.) ID(ICEO) – Ta (typ.) 10 5000 3000 1 1000 tf Dark current ID (μA) VCE = 24V -1 5 10 500 300 Switching time (μs) 10 -2 100 ts 10 -3 50 30 10 tr 10 -4 0 20 40 60 80 100 Ambient Temperature Ta (°C) 5 3 td 1 1 3 10 30 100 Switching Time Test Circuit Load Resistance RL (kΩ) IF RL VCC VOUT IF VOUT td tr 90% 10% tf ts Relative IL – Ta 2.0 E = 0.1mW/cm2 VCE = 3V (typ.) 50 30 Coupling Characteristics with TLN117(F) TLN117(F) IE = 4mW/sr (mA) 1.6 Relative light current 10 5 3 Ta = 25°C TPS622(F): IL = 100 μA at E = 0.1mW/cm2 IC 3V 1.2 Collector current IC 0.8 1 0.5 0.3 1 2 0.4 0 -20 0 20 40 60 80 d TLN117(F) 0.1 0.1 0.3 0.5 0 3 5 10 30 50 Ambient Temperature Ta (°C) Distance d (mm) 4 2007-10-01 TPS622(F) RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN GENERAL • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2007-10-01