TVR4N

TVR4J,TVR4N TOSHIBA Fast Recovery Diode Silicon Diffused Type TVR4J,TVR4N High Speed Rectifier Applications (fast recovery) Unit: mm Repetitive Peak Reverse Voltage: VRRM = 600, 1000 V Average Forward Current: IF (AV) = 1.2 A (Ta = 55°C) Reverse Recovery Time: trr = 20 µs Plastic Mold Type. · · · · Maximum Ratings (Ta = 25°C) Characteristics Repetitive peak reverse voltage TVR4J TVR4N Symbol VRRM IF (AV) IFSM Tj Tstg Rating 600 1000 1.2 100 (50 Hz) -40 to 150 -40 to 150 Unit V A A °C °C Average forward current (Ta = 55°C ) Peak one cycle surge forward current (non repetitive) Junction temperature Storage temperature range JEDEC JEITA TOSHIBA ― ― 3-4B1A Electrical Characteristics (Ta = 25°C) Characteristics Peak forward voltage Repetitive peak reverse current Reverse recovery time Thermal resistance (junction to ambient) Symbol VFM IRRM trr Rth (j-a) IFM = 5 A VRRM = Rated IF = 20 mA, IR = 1 mA DC Test Condition Weight: 0.47 g (typ.) Min ¾ ¾ ¾ ¾ Typ. ¾ ¾ ¾ ¾ Max 1.2 10 20 80 Unit V mA ms °C/W Note1: Soldering: 5 mm is the minimum to be kept between case and soldering part. Note2: Lead bending: 5 mm is the minimum to be kept from the case when bend the lead wire. Marking Type Code Lot No. Code VR 4J Month (starting from alphabet A) Year (last number of the christian era) Cathode Mark Color: Silver VR4J VR4N Type TVR4J TVR4N 1 2002-09-18 TVR4J,TVR4N iF – vF 30 rth (j-a) – t Ta = 25°C 100 (A) 10 5 3 150 Tj = 25°C Instantaneous forward current Transient thermal impedance rth (j-a) (°C /W) 1.6 1.8 2.0 iF 10 1 1 0.5 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.0001 0.001 0.01 0.1 1 10 100 Instantaneous forward voltage vF (V) Time t (s) Surge forward current (non-repetitive) 100 160 Tj = 25°C f = 50 Hz 80 Ta max – IF (AV) Maximum allowable temperature Ta max (°C) 140 120 ① 100 80 ① 60 ② 40 ③ 20 ④ ② ③ 5 mm a Resistive and inductive load a ´ a: solder land 5 mm a 5 mm 5 mm a a 1.4 1.6 1.8 2.0 Peak surge forward current IFSM (A) 60 Solder land 30 ´ 30 mm Solder land 20 ´ 20 mm Solder land 10 ´ 10 mm Solder land less full lead 0.2 0.4 0.6 0.8 1.0 ④ Sine wave 40 20 0 1 3 5 10 30 100 0 0 1.2 Number of cycles Average forward current IF (AV) (A) Ta max – IF (AV) 160 Capacitive load a ´ a: solder land 5 mm a 120 100 ② 80 60 40 20 0 0 ③ ④ Sine wave ① ② ③ ④ ① a a 5 mm 5 mm a Maximum allowable temperature Ta max (°C) 140 Solder land 30 ´ 30 mm Solder land 20 ´ 20 mm Solder land 10 ´ 10 mm Solder land less full lead 0.2 0.4 0.6 0.8 Average forward current IF (AV) (A) 2 2002-09-18 TVR4J,TVR4N RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2002-09-18