HES12-090130-1

厂商：
TOTAL-POWER
封装：
描述：
HES12-090130-1 - UNIVERSAL OR U.S. INPUT RANGE AC TO DC EXTERNAL WALLMOUNT ADAPTERS SINGLE OUTPUT 12...

数据手册：

下载HES12-090130-1.pdf

立即购买

详情介绍
数据手册
价格&库存

HES12-090130-1 数据手册

H HiTRON UNIVERSAL OR U.S. INPUT RANGE AC TO DC EXTERNAL WALLMOUNT ADAPTERS SINGLE OUTPUT 12 WATTS SWITCHING POWER SUPPLIES HES12 OR HES12B SERIES FEATURES: 04/22/2002 LOW COST WALLMOUNT ADAPTER DIVERSE AC PLUGS AVAILABLE MEET DIVERSE SAFETY STANDARDS EMI MEET EN 55022 OR FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: HES12 typ. 90-264Vac, rating 100-240Vac. HES12B typ. 90-132Vac, rating 120Vac. Input Connector: HES12: WM1 (U.S.2-blade)/WM3 (Euro-stecker)/ DT8(IEC320-2P). HES12B: WM1 (U.S.2-blade). Input Frequency: 47-63Hz. Inrush Current: HES12: Typ. 28A @ 230Vac by adding thermister. HES12B: Typ. 22.5A @ 115Vac. Input Current: HES12 Typ. 0.15A @ 230Vac. HES12B Typ. 0.24A @ 115Vac. Dielectric Withstand: Meet IEC950. EMI: Meet EN 55022 or FCC Class B. Hold-up Time: Typ. 13.2mS@115Vac/42.0mS@230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 12 Watts. Output Connector: Optional. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ±2-3%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in. By Zener diode clamping. Adjustability: Factory set. Overload Protection (OLP): Fully protected against output overload or short circuit. Typ. 120-150% max. load. Consult the factory for special OLP setting Operating Temperature: 0 to +40°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Free air convection. Construction: Impact resistant thermo-plastic enclosure case. Wallmount or Desktop format. GENERAL SPECIFICATION Efficiency: Typ. 80.5%. Switching Frequency: Typ. 56-76K Hz.@ full load. Circuit Topology: Free-running flyback circuit. Transient Response: Output voltage returns typ. 1mS following a 25% load change. Safety Standard: UL1950/EN60950.Class II. Power Density: 2.3 Watts. / Cubic Inch. Notes: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 230Vac or 120Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. MODEL NO. DESCRIPTION: HES12 or B - XXX YYY – S HES12B: WM1 OUTPUT CURRENT OUTPUT VOLTAGE SERIES NAME (Hitron External Switcher): About 12W. 04/22/2002 INPUT AC PLUG: HES12: [1]WM1, [3]WM3, [8]DT8 OUTPUT VOLTAGE/CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HES12-033240-1,3,8 HES12B-033240 HES12-050240-1,3,8 HES12B-050240 HES12-060200-1,3,8 HES12B-060200 HES12-065180-1,3,8 HES12B-065180 HES12-075160-1,3,8 HES12B-075160 HES12-090130-1,3,8 HES12B-090130 HES12-120100-1,3,8 HES12B-120100 HES12-150080-1,3,8 HES12B-150080 HES12-240050-1,3,8 HES12B-240050 HES12-480025-1,3,8 HES12B-480025 AC INPUT 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac 90-264Vac 120Vac AC PLUG WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 WM1/WM3/DT8 WM1 O/P VOLTAGE 3.3V 3.3V 5.0V 5.0V 6.0V 6.0V 6.5V 6.5V 7.5V 7.5V 9.0V 9.0V 12.0V 12.0V 15.0V 15.0V 24.0V 24.0V 48.0V 48.0V O/P CURRENT 2.40A 2.40A 2.40A 2.40A 2.00A 2.00A 1.80A 1.80A 1.60A 1.60A 1.30A 1.30A 1.00A 1.00A 0.80A 0.80A 0.50A 0.50A 0.25A 0.25A FORMAT Wallmount/Desktop Wallmount Wallmount/Desktop Wallmount Wallmount/Desktop Wallmount Wallmount/Desktop Wallmount Wallmount/Desktop Wallmount Wallmount/Desktop Wallmount Wallmount/Desktop t Wallmount Wallmount/Desktop Wallmount Wallmount/Desktop Wallmount Wallmount/Desktop Wallmount MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 113g (4.0 Oz.)

下载 PDF

HES12-090130-1

1. 物料型号： - HES12系列：HES12-033240-1,3,8、HES12-050240-1,3,8、HES12-060200-1,3,8、HES12-065180-1,3,8、HES12-075160-1,3,8、HES12-090130-1,3,8、HES12-120100-1,3,8、HES12-150080-1,3,8、HES12-240050-1,3,8、HES12-480025-1,3,8。 - HES12B系列：HES12B-033240、HES12B-050240、HES12B-060200、HES12B-065180、HES12B-075160、HES12B-090130、HES12B-120100、HES12B-150080、HES12B-240050、HES12B-480025。

2. 器件简介： - 通用或美国输入范围交流转直流外部墙式适配器，单输出12瓦特开关电源供应器。

3. 引脚分配： - HES12系列：WM1（美国2刀）、WM3（欧式）、DT8（IEC320-2P）。 - HES12B系列：WM1（美国2刀）。

4. 参数特性： - 输入电压：HES12典型90-264Vac，额定100-240Vac；HES12B典型90-132Vac，额定120Vac。 - 输出电压和电流：详见等级表。 - 输出瓦特数：典型12瓦特。 - 线路调整率：典型0.1%。 - 输入频率：47-63Hz。 - 负载调整率：典型±2-3%。 - 浪涌电流：HES12典型28A@230Vac，通过增加热敏电阻；HES12B典型22.5A@115Vac。 - 过电压保护（OVP）：内置，通过齐纳二极管钳制。 - 输入电流：HES12典型0.15A@230Vac；HES12B典型0.24A@115Vac。 - 调整性：工厂设定。 - 过载保护（OLP）：完全保护输出过载或短路。

5. 功能详解： - 低成本墙式适配器，多种交流插头可用，满足多样的安全标准，EMI满足EN 55022或FCC Class B，CE标志合规。

6. 应用信息： - 一般规格包括效率（典型80.5%）、工作温度（0至+40°C）、存储温度（-20至+85°C）、开关频率（典型56-76kHz@全负载）、电路拓扑（自由运行反激电路）、温度系数（典型0.04%/°C）、瞬态响应（输出电压在负载变化25%后典型1mS内返回）、冷却（自由空气对流）、构造（抗冲击热塑性外壳）、安全标准（UL1950/EN60950.Class II）、功率密度（2.3瓦特/立方英寸）、墙式或桌面格式。

7. 封装信息： - 机械尺寸（毫米[英寸]）、重量：113克（4.0盎司）。

HES12-090130-1 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“HES12-090130-1”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

HES12-090130-1

相关技术文章