TMLM10105

Encapsulated Power Supply TMLM Series Features AC/DC Power Modules for PCB Mounting Highest Power Density Fully encapsulated Plastic Case Universal Input 90-264 VAC, 47 - 440 Hz High Efficiency EMI meets EN 55022, Class B Low Ripple and Noise Short Circuit and Overload Protection 3 Year Product Warranty 10 Watt The TMLM Series switching power supplies, offer highest power density in a fully encapsulated module. This feature makes these modules an ideal solution for all space critical applications in commercial and industrial electronic equipment. Full compliance to European low voltage and EMC directive, UL and cUL safety approval qualifies this product for worldwide markets. SMD-technology and a high efficiency guarantees a high reliability of these Power Supplies. Models Order code TMLM 10103 TMLM 10105 TMLM 10112 TMLM 10115 TMLM 10124 10 Watt Output power, max. Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC Output current, max. 2500 mA 2000 mA 830 mA 666 mA 420 mA http://www.tracopower.com Page 1 of 3 Encapsulated Power Supply TMLM Series 10 Watt Input Specifications Input voltage range Input frequency Input current full load External fuse (recommended) 90 – 264 VAC or 120 – 370 VDC 47 – 440 Hz 220 mA @ 115 VAC / 150 mA @ 230 VAC 1.5 A slow blow type Output Specifications Voltage set accuracy Regulation Minimum load Ripple and noise (20 MHz Bandwidth) Over voltage protection Current limitation Short circuit protection Maximum capacitive load – 3.3 & 5 VDC output models: – other models: – Input variation – Load variation (5– 100%) ±2% 0.3 % max. 0.5 % max. 0% < 1.5 % of Vout < 1.0 % of Vout Zener diode clamp > 120 % fold back hiccup mode, indefinite (automatic recovery) 10’000 µF General Specifications Temperature ranges – Operating – Power derating above 50°C – Storage (non operating) Temperature coefficient Efficiency Humidity (non condensing) Switching frequency Hold-up time Isolation voltage – Input/ Output – 25 °C…+71 °C 3.75 %/°C – 40 °C…+85 °C 0.02 % / °C 80 % (depending on model) 95 % rel max. 125 kHz typ. (Puls width modulation PWM) 15 ms min. 3‘000 VAC t.b.a. EN 55022, class B – Electrostatic discharge ESD – RF field susceptibility – Electrical fast transients / bursts on mainsline Safety Class ll Safety standards Safety approval Case material IEC / EN 61000-4-2 IEC / EN 61000-4-3 IEC / EN 61000-4-4 to IEC / EN 60536 UL 60950, IEC 60950, EN 60950 cUL / UL File E188913 Plastic resin + Fiberglass (UL 94V-0 - rated) 4 kV / 8 kV 3 V/m 1 kV Reliability /calculated MTBF (MIL-HDBK-217E) EMI / RFI conducted EMC compliance All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Encapsulated Power Supply TMLM Series 10 Watt Outline Dimensions mm (inches) (0.13) 3.4 10.16 ±0.3 20.32 ±0.3 (0.8 ±0.012) AC in Bottom view 27.2 (1.07) - Vout +Vout AC in (0.4 ±0.012) 45.72 ±0.3 (1.80 ±0.012) 52.4 (2.06) 3.4 (0.13) 23.0 (0.91) 10 (0.39) Pin diameter ø 1.0 mm Weight: 30 g (1.1 oz) ( ) = Inches Tolerances = 0.5mm (0.02) Specifications can be changed without notice Rev. 03/05 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41 43311 4511 • Fax +41 43311 4545 • info@traco.ch • www.tracopower.com Page 3 of 3