TMR2-4813WI

DC/DC Converters TMR 2WI Series, 2 Watt Features ◆ Ultra-wide 4: Input Range ◆ SIP-9 Package ◆ Full SMD Design ◆ Temperature Range –40 to +75°C ◆ High Efficiency ◆ Excellent Load and Line Regulation ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 500 VDC ◆ Remote On/Off Control ◆ Fully RoHS compliant ◆ 3 Year Product Warranty compliant RoHS The TMR-2WI series is a new family of isolated 2W dc-dc converter modules with regulated output, featuring ultra-wide 4:1 input voltage ranges of 9-36 VDC or 18-75 VDC. The product comes in a ultra-compact SIP-9 plastic package. An excellent efficiency up to 84% allows –40°c to +75°C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. Typical applications for these ultra-compact converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where space on the PCB is critical. Models Ordercode TMR 2-240WI TMR 2-24WI TMR 2-242WI TMR 2-243WI TMR 2-242WI TMR 2-2422WI TMR 2-2423WI TMR 2-480WI TMR 2-48WI TMR 2-482WI TMR 2-483WI TMR 2-482WI TMR 2-4822WI TMR 2-4823WI 8 – 75 VDC (48 VDC nominal) 9 – 36 VDC (24 VDC nominal) Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ±12 VDC ±15 VDC Output current max. 500 mA 400 mA 165 mA 135 mA ±200 mA ±85 mA ±65 mA 500 mA 400 mA 165 mA 135 mA ±200 mA ±85 mA ±65 mA Efficiency typ. 75 % 80 % 83 % 84 % 77 % 81 % 83 % 75 % 80 % 83 % 84 % 77 % 81 % 83 % http://www.tracopower.com Page  of 3 DC/DC Converters TMR 2WI Series Input Specifications Input current at no load (nominal input) Input current at full load (nominal input) Surge voltage (100 msec. max.) Reverse voltage protection Input Filter Start up time 24 Vin models: 20 mA typ. 48 Vin models: 15 mA typ. 24 Vin models: 110 mA typ. 48 Vin models: 55 mA typ. 24 Vin models: 50 V max. 48 Vin models: 100 V max. 0.5 A max. capacitor type < 1ms ( at nominal input and resistive load) ±2% – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 10 – 100 % single output models: 0.75 % max. dual output models: 1.0% max. (balanced load) ± 0.1 %/°C 50 mVpk-pk max 300 µs typ. constant current ( automatic recovery) 3.3 VDC / 5 VDC 12 VDC / 15VDC ±5 VDC / ±12 VDC ±15 VDC – Operating – Case temperature – Storage models: models: models: models: 2’200 µF max. / 1’000 µF max. 170 µF max. / 110 µF max. 470 µF max. / 100 µF max. ( each output) 47 µF max. ( each output) – 40 °C ... + 75 °C (no derating) +100 °C max. – 55 °C ... + 105 °C 95 % rel. H max. > 1 Mio h @ 25°C 1’500 VDC 500 pF max. > 1‘000 M Ohm 100 to 650 kHz (PFM) – On: – Off: – Off stand by input current < 0.6 VDC or open 2.7...15 VDC 0.2 mA max. non-conductive plastic epoxy, UL94V-0 - rated 6.5g (0.23oz) – Input/Output – Input/Output – Input/Output (500 VDC) 2 Watt Output Specifications Voltage set accuracy Regulation Temperature coefficient Ripple and noise (20 MHz Bandwidth) Transient Response (25% load step change) Short circuit protection Capacitive load General Specifications Temperature ranges Humidity (non condensing) Reliability, calculated MTBF ( MIL-HDBK-217F ground benign) Isolation voltage (60 sec) Isolation capacitance Isolation resistance Switching frequency Remote On/Off control Case material Potting material Weight All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TMR 2WI Series Outline Dimensions Pin-Out Pin 12.5 (0.49) 2 Watt Single –Vin (GND) +Vin (Vcc) Remote On/Off +Vout No function No function –Vout Dual –Vin (GND) +Vin (Vcc) Remote On/Off +Vout Common No function –Vout  2 3 (0.16) 4.0 6 7 8 9 1.8 2 x 2.54 (0.07) (2 x 0.1) 7.62 (0.3) 3 x 2.54 (3 x 0.1) 26.0 (1.02) 1 2 3 6 7 8 9 9.3 (0.36) Bottom view 0.3 (0.012) 0.5 (0.02) Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (0.02) Pin pitch tolerances ±0.2 (0.008) Specifications can be changed any time without notice. Rev.01/08 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com 2.75 (0.11) Page 3 of 3