TOS06-05SM

DC/DC Converters TOS Series, Point-of-Load (POL) Converter Features ◆ Small Size, low Profile ◆ SMT package or SIP version ◆ Cost-efficient open Frame Design ◆ Wide Input Voltage Ranges ◆ Output Voltages trim from 0.75VDC to 5.0VDC compliant RoHS ◆ ◆ ◆ ◆ ◆ ◆ ◆ Delivers up to 16A with minimal derating Ultra high Efficiency to 96% Fast Transient Response Remote On/Off Control Wide Temperature Range( -40°C to 85°C) SMT Package fully DOSA compatible Lead free Design – RoHS compliant The TOS series is a range of high performance non-isolated dc-dc converters With very high efficiency that can supply up to 16A of output current. These modules provide precisely regulated output voltages which can be set via an external resistor to a value from 0.75 VDC to 5.0VDC. These converters work over a wide input voltage range of 2.4 to 5.5VDC or 8.3 to 14.0VDC.Further features include remote On/Off, under voltage lockout, over temperature and over current protection. These products have an open-frame construction with very small footprint and are available in an industry standard SIP or in a SMT package. The TOS series is fully RoHS compliant and can withstand industry standard handling, cleaning and the high temperatures of lead-free reflow solder processes. Models Order code SMT-version TOS 06-05SM TOS 10-05SM TOS 16-05SM TOS 06-12SM TOS 10-12SM TOS 16-12SM SIL-version TOS 06-05SIL TOS 10-05SIL TOS 16-05SIL TOS 06-12SIL TOS 10-12SIL TOS 16-12SIL 8.3 – 14 VDC 0.75 – 5.0 VDC 2.4 – 5.5 VDC 0.75 – 3.3 VDC* 6A 10 A 16 A 6A 10 A 16 A 94 % 93 % 95 % 89 % 93 % 92 % 8.3 – 14.0 VDC 0.75 – 5.0 VDC 2.4 – 5.5 VDC 0.75 – 3.3 VDC* Input voltage range Output voltage range Output current max. 6A 10 A 16 A 6A 10 A 16 A Efficiency typ. 94 % 93 % 95 % 89 % 93 % 92 % * Max output voltage to be adjusted min. 0.5 VDC below impressed input voltage http://www.tracopower.com Page 1 of 4 DC/DC Converters TOS Series, Input Specifications Input current no load – Vin 5 VDC (at Vout min./Vout max.) 6 10 16 – Vin 12 VDC (at Vout min./Vout max.) 6 10 16 A A A A A A models: models: models: models: models: models: 20 mA / 45 mA typ. 25 mA / 30 mA typ. 25 mA / 40 mA typ. 17 mA / 100 mA typ. 40 mA / 100 mA typ. 40 mA / 100 mA typ. POL Converter Stand by input current ( at remote Off) Max. input current – Vin 5 VDC 6 A models: 1 mA typ. 10 A/16 A models: 2 mA typ. 6 10 16 6 10 16 A A A A A A models: models: models: models: models: models: 6A 10 A 16 A 4.5 A 7A 10 A – Vin 12 VDC Start up voltage / under voltage lockout Start up time (power/remote On till Vout set) Reflected ripple current (with input filter) – Vin 5 VDC – Vin 12 VDC 5 Vin models: 2.2 VDC / 2.0 VDC typ. 12 Vin models: 7.9 VDC / 7.8 VDC typ. 8 mS typ. 6 10 A / 16 6 10 16 A A A A A models: models: models: models: models: 35 mA typ. 100 mA typ. 30 mA typ. 20 mA typ. 20 mA typ. 2 x 150 µF low ESR polymer capacitors and 2 x 47 µF ceramic capacitors ± 2 % max. (see page 3 for set up) ± 1 % max. ± 0.3 % max. ± 0.4 % max. Input filter external (recommended) Output Specifications Voltage set accuracy Voltage balance ( dual output models) Regulation – Input variation – Load variation 0 – 100 % Dynamic load response – 50% load change (upper half) with external 1 µF ceramic- and 10 µF tantalum capacitors max. peak variation / response time Vin 5 VDC, 6 A models: 130 mV / 60 µS typ. Vin 12 VDC, 6 A models: 200 mV / 35 µS typ. Vin 5 VDC, 10 A models: 200 mV / 25 µS typ. Vin 12 VDC, 10 A models: 200 mV / 25 µS typ. Vin 5 VDC, 16 A models: 300 mV / 25 µS typ. Vin 12 VDC, 16 A models: 200 mV / 25 µS typ. – 50% load change (upper half) with external 2 x 150 µF polymer capacitors Vin 5 VDC, 6 A models: 50 mV / 100 µS typ. Vin 12 VDC, 6 A models: 50 mV / 50 µS typ. Vin 5 VDC, 10 A models: 100 mV / 100 µS typ. Vin 12 VDC, 10 A models: 100 mV / 25 µS typ. Vin 5 VDC, 16 A models: 150 mV / 100 µS typ. Vin 12 VDC, 16 A models: 100 mV / 50 µS typ. Ripple and noise (20 MHz Bandwidth) Temperature coefficient Over current protection Short circuit protection Capacitive load – ESR < 1 mOhm – ESR < 10 mOhm 5 Vin models: 50 mV pk-pk max. 12 Vin models: 75 mV pk-pk max ±0.4% typ. at 200% of Iout max. typ. indefinite, automatic recovery 1000 µF max. 6 A models: 3000 µF max. 10 A / 16 A models: 5000 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TOS Series, General Specifications Temperature ranges Derating Over temperature protection Humidity (non condensing) Reliability, calculated MTBF ( Bellcore TR-NWT-000332) Switching frequency Remote On/Off (reference to GND) – Operating – Storage –40 °C ... +85 °C –55 °C ... +125 °C derating graphs will be published soon. For specific demand ask factory. @ 125°C typ. 95 % rel H max. 6 A models: >20 mio. h @ 40 °C 10 A / 16 A models: >14 mio. h @ 40 °C 300 kHz typ. (pulse width modulation - PWM) On: 1 VDC ... Vin max. or open circuit. Off: 0 ... 0.3 VDC 6 A models: 2.8 g 10 A / 16 A models: 6 g – SIL - Version – SMT - Version max. 265 °C / 10 sec. (wave soldering) peak temp. 245°C for 10 sec. max., 217°C for 90 sec. max. ( Convection reflow solder process is recommended) POL Converter Physical Specifications Weight Soldering profile Full instruction manual can be downloaded under: www.tracopower.com/products/tos_application.pdf Output Voltage Adjustment Vo (+Vout) Prog Rd GND 5 VDC input models: Load Rd [Ohm] = 21070 – 5110 Vo – 0.7525 10570 – 1000 Vo – 0.7525 12 VDC input models: Rd [Ohm] = All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TOS Series, Outline Dimensions mm (inches) Single-in-Line (SIL-Version) 6 A output Models (0.26) POL Converter 6.65 22.9 (0.90) 10.2 (0.40) On/Off GND Prog (0.13) 3.29 (0.02) (0.028) 0.51 (0.05) 1.28 Vout (0.025) Vin 2.54 (0.1) 15.24 (0.6) 17.78 (0.7) 20.32 (0.8) 0.64 0.70 10A & 16A output models (0.33) 8.28 50.8 (2.00) 12.7 (0.50) On/Off No Pin GND GND Prog Vout Vout (0.128) 3.24 (0.02) (0.046) 0.51 (0.05) 1.28 Sens Vin Vin Vout (0.025) 0.64 1.18 5 x 2.54 (5 x 0.10) 25.4 (1.0) 4 x 2.54 (4 x 0.10) Surface Mount (SMT-Version) 6 A output Models 4.06 4.06 4.57 (0.16) (0.16) (0.18) 8.9 (0.35) 8.64 (0.34) (0.05) Bottom View Vin On/Off (0.82) 1.57 (0.82) 1.57 (0.09) 2.29 1.3 17.52 (0.69) 20.3 (0.8) (0.24) 5.97 10A & 16A output models (0.19) 4.83 (0.19) 4.83 (0.19) 4.83 (0.19) 4.83 (0.06) 1.5 11.4 (0.45) (0.30) GND Prog Vout 7.54 No Pin GND Vout Prog Sens 10.92 (0.43) 10.29 (0.41) (0.05) Bottom View On/Off (0.82) 1.57 (0.82) 1.57 (0.112) 2.84 1.3 29.9 (1.18) 33.0 (1.3) (0.33) 8.28 Specifications can be changed without notice Rev. 10/05 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com 1.9 Vin (0.075) 13.5 (0.53) Page 4 of 4