TS32GSSD10-M

TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Description The 1-inch Solid State Disk is small in size, has a huge capacity and low power consumption making it perfect for use as a mobile storage solution in devices such as, Mobile Phones, PDA and GPS systems. This guide is written to provide general installation and handling information, please use it in conjunction with the Owner’s Manual for your device or system. • • 1.0” Solid State Disk Features Features • RoHS compliant • Fully compatible with 1.0-inch hard drive form factor and interface (35-Pin FPC ZIF connector) Non-volatile Flash Memory for outstanding data retention Built-in 13/24 ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer Placement Placement • • • • • • Supports up to PIO Mode 4 and Ultra DMA Mode 5 Supports ATA Security Commands Support S.M.A.R.T function (self-definition) Lower Power Consumption Shock resistance Power Supply: 3.3V ± 5% Dimensions Dimensions Side A B C Millimeters 40.00 ± 0.30 30.00 ± 0.20 3.80 ± 0.50 Inches 1.575 ± 0.012 1.181 ± 0.008 0.149 ± 0.020 1 Transcend Information Inc. V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Specifications Specifications Physical Specification Form Factor Storage Capacities Length Dimensions (mm) Width Height Weight Connector 1-inch HDD 2 GB to 32 GB 30.0 0 ± 0.20 40.00 ± 0.30 3.80 ± 0.50 6g 1.0” Solid State Disk 0.3 mm pitch 35-Pin Zero Insertion Force (ZIF) connector (P-ATA) Environmental Specifications Humidity Operating Humidity (Non condensation) Storage Humidity (Non condensation) 5% to 95% 5% to 95% * Note: Reference to the IEC 60068-2-1 and IEC 60068-2-56 Testing procedures; 48-hours chamber test on ASUS M2N-MX, 1GB RAM, Windows XP Version 2002 SP2. ® Power Requirements Input Voltage Mode Power Consumption (DC 3.3V @25 ) Write Read Standby TYP (mA) 84.5 55.1 0.4 DC 3.3V ± 5% MAX (mA) 93.4 68.4 1.3 * Note: Base on TS16GSSD10-M 2 Transcend Information Inc. ℃ V1.6 ℃ Storage Temperature - 40 to 85 ℃ ℃ Operating Temperature 0 to 70 ℃ TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Reliability Data Reliability Data Retention Connector Durability MTBF 1.0” Solid State Disk 13bit/1KB BCH ECC(2k+64 / 4k+128 byte per page flash) 24bit/1KB BCH ECC(4k+208 byte per page flash) 10 years 10 times 4,400,000 hours Interface Specification Drivers No Device Driver Required ATA/ATAPI 7 ATA Compatibility PIO Modes 0 - 4 Multiword mode 0 - 2 UDMA Modes 0 - 5 Performance Model P/N TS2GSSD10-M TS4GSSD10-M TS8GSSD10-M TS16GSSD10-M TS32GSSD10-M Capacity 2GB 4GB 8GB 16GB 32GB Read 35213 35371 47805 45169 43686 Write 7867 12248 10586 12134 16756 Random Read 33952 33602 45816 40943 41457 Random Write 2151 2674 3431 3796 3567 UDMA4, Windows XP Version 2002 SP2, benchmark utility HDBENCH (version 3.4006), copied file 100MB Actual Capacity Model P/N TS2GSSD10-M TS4GSSD10-M TS8GSSD10-M TS16GSSD10-M TS32GSSD10-M * Note: FAT32 format Capacity 2GB 4GB 8GB 16GB 32GB Cylinder 3884 7769 15538 33149 66298 Head 16 16 16 15 15 Sector 63 63 63 63 63 Regulations Compliance CE, FCC and BSMI (T.B.D.) 3 Transcend Information Inc. ℃ * Note : 25 , according to 44 pin to 40 pin IDE transferring cable test on ASUS M2N-MX, 1GB RAM, IDE interface support ® V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Package Dimensions Below figure illustrates the Transcend 1” Solid State Disk. All dimensions are in mm. 1.0” Solid State Disk 4 Transcend Information Inc. V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Pin Assignments Pin No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 Pin Name GND DD9 DD8 -PDIAG -DASP -DMACK DMARQ IORDY -CSEL VCC -DIOW -CS1 DD15 DD14 DD13 DD12 DD11 GND Pin No. 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 1.0” Solid State Disk Pin Name DD10 DD2 DD1 DD0 DA0 DA1 DA2 -RESET VCC INTRQ -DIOR -CS0 DD7 DD6 DD5 DD4 DD3 Pin Pin Layout Pin out 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 5 Transcend Information Inc. GND DD10 DD9 DD2 DD8 DD1 -PDIAG DD0 -DASP DA0 -DMACK DA1 DMARQ DA2 IORDY -RESET -CSEL VCC VCC INTRQ -DIOW -DIOR -CS1 -CS0 DD15 DD7 DD14 DD6 DD13 DD5 DD12 DD4 DD11 DD3 GND V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Block Diagram 1.0” Solid State Disk Data bus D00 ~ D07 -CE0~CE7… Flash Memory D0 – D7 -CE0~CE3 -WE…-RE DC Characteristics Parameter Supply Voltage High level output voltage Low level output voltage High level input voltage Symbol VCC VOH VOL VIH 2.4 2.05 Low level input voltage Pull up resistance 2 Pull down resistance Note: 1. Include CS0#, CS1#, DMACK, HIOR#, HIOW# pins. 2. Include CS0#, CS1#, DMACK, HIOR#, HIOW#, CSEL#, PDIAG#, DASP# pins. 6 Transcend Information Inc. 35 PIN FPC Connector Control Signal Solid State Disk Others Power Controller D10 ~ D17 -CE0~CE7… Flash Memory D0 – D7 -CE0~CE3 -WE…-RE Min. 2.97 VCC – 0.8 Max. 3.63 Unit V V Remark 0.8 V V V Non-schmitt trigger Schmitt trigger 1 VIL 0.6 1.25 V V KOhm kOhm Non-schmitt trigger Schmitt trigger 1 RPU RPD 52.7 47.5 141 172 V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Command Set Command 1 2 3 4 5 6 7 8 9 10 Check Power Mode Execute Drive Diagnostic Erase Sector Flush Cache Format Track Identify Device Idle Idle Immediate Initialize Drive Parameters Key Management Structure Read Key Management Read Keying Material Key Management Change Key Management Value NOP Read Buffer Read DMA Read Long Sector Read Multiple Read Sector(s) Read Verify Sector(s) Recalibrate Request Sense Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Lock Security Set Password Security Unlock Code E5 or 98h 90h C0h E7h 50h ECh E3h or 97h E1h or 95h 91h B9 (Feature 0-127) B9 (Feature 80) B9 (Feature 81) 00h E4h C8h 22h or 23h C4h 20h or 21h 40h or 41h 1Xh 03h F6h F3h F4h F5h F1h F2h FR – – – – – – – – – Y SC – – Y – Y – Y – Y Y SN – – Y – – – – – – Y CY – – Y – Y – – – – Y DH Y Y Y Y Y Y Y Y Y Y LBA – – Y – Y – – – – – 1.0” Solid State Disk Status Support Support Support Support Support Support Support Support Support NOT Support Note #1 11 Y Y Y Y Y – NOT Support #1 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Y – – – – – – – – – – – – – – – Y – – Y Y – – Y Y Y – – Y Y Y Y Y – – – – – – – – Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y – – – – Y Y Y Y Y NOT Support NOT Support Support Support NOT Support Support Support Support Support #1 #2 Y Y Y – – – – – – – – Y Y Y – – – – – – – – – – – – – – – Support Support Support Support Support Support Support 7 Transcend Information Inc. V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Seek Set Feature Set Multiple Mode Set Sleep Mode Standby Standby Immediate Translate Sector W ear Level W rite Buffer W rite DMA W rite Long Sector W rite Multiple W rite Multiple w/o Erase W rite Sector(s) W rite Sector(s) w/o Erase W rite Verify 7Xh EFh C6h E6h or 99h E2 or 96h E0 or 94h 87h F5h E8h CAh 32h or 33h C5h CDh 30h or 31h 38h 3Ch – Y – – – – – – – – – – – – – – – – Y – – – Y – – Y – Y Y Y Y Y Y – – – – – Y – – Y Y Y Y Y Y Y Y – – – – – Y – – Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y – – – – – Y – – Y Y Y Y Y Y Y 1.0” Solid State Disk Support Support Support Support Support Support Support Support Support Support Not Support Support Support Support Support Support #2 #4 #1: This command is optional, depending on the key Management scheme in use. #2: Use of this command is not recommended. #3: If Security command 22~27 are supported, this command is not supported. Definitions FR = Features Register SC =Sector Count register (00H to FFH, 00H means 256 sectors) SN = Sector Number register CY = Cylinder Low/High register DH = Head No. (0 to 15) of Drive/Head register LBA = Logic Block Address Mode Support – = Not used for the command Y = Used for the command 8 Transcend Information Inc. V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M SMART Command Set SMART Command Set SMART Feature Register Values D0h D1h D2h D3h D4h Read Data Read Attribute Threshold Enable/Disable Autosave Save Attribute Values Execute OFF-LINE Immediate D5h D6h D8h D9h DAh Read Log Write Log 1.0” Solid State Disk Enable SMART Operations Disable SMART Operations Return Status * If reserved size is below the Threshold, the status can be read from Cylinder register by Return Status command (DAh). SMART Data Structure BYTE 0-1 2-361 362 363 364-365 366 367 368-369 F/V X X V X V X F F Revision code Vendor specific Off line data collection status Self-test execution status byte Total time in seconds to complete off-line data collection activity Vendor specific Off-line data collection capability SMART capability Error logging capability 370 F 7-1 Reserved 0 1=Device error logging supported 371 372 373 374 375-385 386-395 396-397 398-399 400 X F F F R F F V V Vendor specific Short self-test routine recommended polling time (in minutes) Extended self-test routine recommended polling time (in minutes) Conveyance self-test routine recommended polling time (in minutes) Reserved Date Code Number of initial invalid block (396 = MSB, 397 = LSB) Number of run time bad block (398 = MSB, 399 = LSB) Number of spare block Decription 9 Transcend Information Inc. V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M 511 V Data structure checksum 1.0” Solid State Disk F=the content of the byte is fixed and does not change. V=the content of the byte is variable and may change depending on the state of the device or the commands executed by the device. X=the content of the byte is vendor specific and may be fixed or variable. R=the content of the byte is reserved and shall be zero. * 4 Byte value : [MSB] [2] [1] [LSB] 01 Transcend Information Inc. V1.6 TS2GSSD10-M ~ TS32GSSD10-M TS2GSSD10-M ~ TS32GSSD10-M Ordering Information 1.0” Solid State Disk TS XG SSD XX Transcend Product Form Factor 10 = 1” (SLC) 10-M = 1” (MLC) 10-I = 1” Industrial (SLC) Solid State Disk Capacity: 2G-32G = 2 GB up to 32 GB The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. JAPAN E-mail: sales@transcend.co.jp www.transcend.jp CHINA E-mail: sales@transcendchina.com www.transcendchina.com TAIWAN No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales@transcend.com.tw www.transcend.com.tw GERMANY E-mail: vertrieb@transcend.de www.transcend.de HONG KONG E-mail: sales@transcend.com.hk www.transcendchina.com Korea USA Los Angeles: E-mail: sales@transcendusa.com Maryland: E-mail: sales_md@transcendusa.com www.transcendusa.com E-mail: sales@transcend.co.kr www.transcend.co.kr THE NETHERLANDS E-mail: sales@transcend.nl www.transcend.nl United Kingdom E-mail: sales@transcend-uk.com www.transcend-uk.com 11 Transcend Information Inc. V1.6