TS4GDOM44H

Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Description With an IDE interface and strong data retention ability, 44-Pin IDE Flash Modules are ideal for use in the harsh environments where Industrial PCs, Set-Top Boxes, etc. are used. • • Features • • RoHS compliant Fully compatible with devices and OS that support the IDE standard (44-Pin, pitch = 2.00 mm) Non-volatile Flash Memory for outstanding data retention Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer Supports up to Ultra DMA Mode 4 Supports PIO Mode 6 LED indicates status of usage (Data Access) Shock resistance • • • • Placement Dimensions Side A B C Millimeters 46.00 ± 0.40 28.00 ± 0.20 6.00 ± 0.50 Inches 1.81 ± 0.016 1.10 ± 0.008 0.24 ± 0.020 Transcend Information Inc. 1 Ver 1.0 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Specifications Physical Specifications Storage Capacities Length Dimensions (mm) Width Height Weight Connector 128 MB to 4 GB 46.0 0 ± 0.40 28.00 ± 0.20 5.87 ± 0.50 7 g (Max.) 44-Pin standard IDE/ATA connector (Pitch 2.0 mm) Environmental Specifications Operating Temperature Storage Temperature 0 ℃ to 70 ℃ - 40 ℃ to 85 ℃ Reliability Write/Erase Endurance Read Endurance Data Reliability Data Retention Connector Durability > 2,000,000 cycles Unlimited Built-in 4 symbol correction ECC (per 512 bytes Sector) 10 years 5,000 times Interface Specifications Jumper Settings Master/Slave Settings ATA/ATAPI 5 ATA Compatibility PIO Modes 0 – 6 UDMA Modes 0 – 4 Transcend Information Inc. 2 Ver 1.0 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Capacity Specifications Transcend P/N TS128MDOM44H TS256MDOM44H TS512MDOM44H TS1GDOM44H TS2GDOM44H TS4GDOM44H Capacity 128MB 256MB 512MB 1GB 2GB 4GB Cylinder (C) 978 978 993 1985 3954 7889 Head (H) 8 16 16 16 16 16 Sector (S) 32 32 63 63 63 63 Compliance and Warranty Compliance Warranty CE, FCC and BSMI 2 years Transcend Information Inc. 3 Ver 1.0 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Package Dimensions Below figure illustrates the Transcend 44-Pin IDE Flash Module (Horizontal). All dimensions are in mm. Transcend Information Inc. 4 Ver 1.2 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Pin Assignments Pin No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 Pin Name -RESET DD7 DD6 DD5 DD4 DD3 DD2 DD1 DD0 GND DMARQ -DIOW : STOP -DIOR : -HDMARDY : HSTROBE IORDY : DDMARDY : DSTROBE -DMACK INTRQ DA1 DA0 -CS0 -DASP VCC GND Pin No. 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 Pin Name GND DD8 DD9 DD10 DD11 DD12 DD13 DD14 DD15 KEY-PIN (OPEN) GND GND GND CSEL GND IOCS16B -PDIAG : -CBLID DA2 -CS1 GND VCC NC (No Connect) Pin Layout Pin1 Bulge Pin43 Pin2 Pin44 Transcend Information Inc. 5 Ver 1.2 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Pin Description Pin No. 01 17, 15, 13, 11, 09, 07, 05, 03, 04, 06, 08, 10, 12, 14, 16, 18 21 -RESET DD0 ~ DD15 (Device Data) I/O DMARQ (DMA Request) O 23 -DIOW (I/O Write) I STOP (Stop UDMA Burst) 25 -DIOR (I/O Read) -HDMARDY (UDMA ready) I HSTROBE (UDMA Strobe) 27 IORDY (I/O channel ready) Signal I/O* I Description Hardware reset signal from the host. 16-bit bi-direction Data Bus. DD(7:0) are used for 8-bit register transfers. For DMA data transfers. Device will assert DMARQ when the device is ready to transfer data to or from the host. This is the strobe signal used by the host to write to the device register or Data port. The host asserts this signal during an UDMA burst to stop the DMA burst. This is the strobe signal used by the host to read from the device register or the Data port. When UDMA mode DMA Read is ready, -HDMARDY should be asserted by the host to indicate that the host is ready to receive DMA data-in burst. HSTROBE receives the data-out strobe signal from the host for an UDMA burst. This signal is used to temporarily stop the host register access (read or write) when the device is not ready to respond to a data transfer request. O The device will assert this signal to indicate that the device is ready to receive UDMA data-out burst. When UDMA mode DMA Read is active, this signal is the data-in strobe generated by the device. I 29 31 32 -DMACK (DMA acknowledge) INTRQ (Interrupt) IOCS16B This pin is used to configure this device as Device 0 or Device 1. When this pin is grounded, this device is configured as Device 0. When this pin is High, this device is configured as Device 1. This signal is used by the host in response to DMARQ to initiate DMA transfer. When this device is selected, this signal is the active high Interrupt Request to the host. During PIO transfer mode 0, 1 or 2, this pin indicates to the host the 16-bit data port has been addressed and the device is prepared to send or receive a 16-bit data word. When transferring in PIO mode 3, 4, or above, this signal should not be used by the host, and all transfers will be 16-bit. When transferring in DMA mode, the host must use a 16-bit DMA channel and this signal will not be asserted. DDMARDY (UDMA ready) DSTROBE (UDMA data strobe) 28 CSEL (Cable select) I O O Transcend Information Inc. 6 Ver 1.2 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB 35, 33, 36 34 DA0 ~ DA2 (Device Address) -PDIAG (Passed diagnostics) -CBLID (Cable assembly type identifier) 37, 38 -CS0, -CS1 (Chip select) I 39 41, 42 2, 19, 22, 24, 26, 30, 40, 43 * Note: “I” “O” “I/O” “P” An input from the host system to the device. An output from the device to the host system. An input/output (bi-direction) common. Power supply. -DASP (Device active, Device 1 present) VCC GND These signals are used to select the Command Block and Control Block registers. When –DMACK is asserted, -CS0 and –CS1 shall be negated and transfers shall be 16-bit wide. During the reset protocol, -DASP shall be asserted by Device 1 to indicate that the device is present. Power supply. Ground. I This is the 3-bit binary coded Address Bus. This signal will be asserted by Device 1 to indicate to Device 0 that Device 1 has completed diagnostics. I/O I/O P - Block Diagram Data bus D00 ~ D07 -CE0, -CE2… Flash Memory D0 – D7 -CE0 -CE1 -WE…-RE Transcend Information Inc. 44 PIN IDE Connector Control Signal Others IDE Power Flash Disk Controller D10 ~ D17 -CE1, -CE3… Flash Memory D0 – D7 -CE0 -CE1 -WE…-RE 7 Ver 1.2 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Command Set The following table summarizes the command defined in the ATAPI-5 specification and lists the commands supported by the TS128M-4GDOM44H. Note 1: FR (Feature Register), SC (Sector Count Register), SN (Sector Number Register), CY (Cylinder Low/High Register), DR (Drive bit of Drive/Head Register), HD (Head No. bit0-bit3 of Drive/Head Register), LBA (Logical Block Address Mode supported). Y: Set up; －: Not set up; C: The register contains command specific data. Transcend Information Inc. 8 Ver 1.2 Transcend 44-Piin IIDE Fllash Modulle (Horiizontall) Transcend 44-P n DE F ash Modu e (Hor zonta ) 128M ~ 4GB 128M ~ 4GB Ordering Information TS XXXX DOM 44 H Transcend Product Capacity: 32M-512M = 32 MB up to 512 MB 1G-4G = 1 GB up to 4 GB IDE Flash Module (Disk On Module) Type: V = Vertical H = Horizontal Pin Count: 40 = 40 pin 44 = 44 pin The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. USA Los Angeles: E-mail: sales@transcendusa.com Maryland: E-mail: sales_md@transcendusa.com www.transcendusa.com CHINA E-mail: sales@transcendchina.com www.transcendchina.com TAIWAN No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales@transcend.com.tw www.transcend.com.tw GERMANY E-mail: vertrieb@transcend.de www.transcend.de HONG KONG E-mail: sales@transcend.com.hk www.transcendchina.com JAPAN E-mail: sales@transcend.co.jp www.transcend.jp THE NETHERLANDS E-mail: sales@transcend.nl www.transcend.nl United Kingdom E-mail: sales@transcend-uk.com www.transcend-uk.com Transcend Information Inc. 9 Ver 1.2