TS4GUSDHC6-P3

TS4/8GUSDHC6-P3 Description Transcend High Capacity microSD Card series are specifically designed to meet the High Capacity, High Definition Audio and Video requirement for the latest Digital Cameras, DV Recorders, Mobile Phones, etc. The new defined Speed Class enables the host to support AV applications to perform real time recording to the microSD memory card. 4/8GB microSDHC Class 6 Card + Reader P3 Features • RoHS compliant product. • Operating Voltage: 2.7 ~ 3.6V • Operating Temperature: -25 ~ 85° C • Durability: 10,000 insertion/removal cycles • Compatible with SD Specification Ver. 2.0 • Comply with SD File System Specification Ver. 2.0 • Mechanical Write Protection Switch with microSD adapter • Supports Speed Class Specification Class 6 • Supports Copy Protection for Recorded Media (CPRM) for Front Pin Definition Pin No. Name 1 2 3 4 5 6 7 DAT2 CD/DAT3 CMD VDD CLK VSS DAT0 DAT1 Type I/O/PP I/O/PP PP S I S I/O/PP I/O/PP Description Data Line [Bit2] Card Detect / Data Line [Bit3] Command / Response Supply voltage Clock Supply voltage ground Data Line [Bit0] Data Line [Bit1] Name RSV CS DI VDD 8 1 Transcend Information Inc. 87654321 Placement SD-Audio • Seamless compatibility with SDMI-compliant digital audio devices • Form Factor: 11mm x 15mm x 1mm Back SD Mode Type SPI Mode Description Reserved I I S I S O/PP Chip Select Data In Supply voltage SCLK VSS Clock Supply voltage ground DO RSV Data out Reserved S: Power Supply; I:Input; O:Output; PP:Push-Pull TS4/8GUSDHC6-P3 Architecture 4/8GB microSDHC Class 6 Card + Reader P3 2 Transcend Information Inc. TS4/8GUSDHC6-P3 Bus Operating Conditions • General Parameter Peak voltage on all lines All Inputs Input Leakage Current All Outputs Output Leakage Current -10 -10 4/8GB microSDHC Class 6 Card + Reader P3 Symbol Min. -0.3 Max. VDD+0.3 10 10 Unit V µA µA Remark • Power Supply Voltage Parameter Supply voltage Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Power up time Symbol VDD VOH VOL VIH VIL Min. 2.7 0.75* VDD Max. 3.6 0.125* VDD Unit V V V V V ms Remark IOH=-100uA@VDD Min. IOL=100uA@VDD Min. 0.625* VDD VDD+0.3 VSS-0.3 0.25* VDD 250 From 0v to VDD Min. • Current Consumption The current consumption is measured by averaging over 1 second. Before first command: Maximum 15 mA • Bus Signal Line Load The total capacitance CL the CLK line of the SD Memory Card bus is the sum of the bus master capacitance CHOST, the bus capacitance CBUS itself and the capacitance CCARD of each card connected to this line: CL = CHOST + CBUS + Ν*CCARD W here N is the number of connected cards. 3 Transcend Information Inc. • • • • • During initialization: Maximum 100 mA Operation in Default Mode: Maximum 100 mA Operation in High Speed Mode: Maximum 200 mA Operation with other functions: Maximum 500 mA. Parameter Pull-up resistance Bus signal line capacitance Symbol RCMD RDAT CL Min. 10 Max. 100 40 Unit kΩ pF Remark To prevent bus floating 1 card CHOST+CBUS shall not exceed 30 pF TS4/8GUSDHC6-P3 Single card capacitance Maximum signal line inductance Pull-up resistance inside card (pin1) RDAT3 10 CCARD 4/8GB microSDHC Class 6 Card + Reader P3 10 16 90 pF nH kΩ fPP ≤ 20 MHz May be used for card detection Note that the total capacitance of CMD and DAT lines will be consist of CHOST, CBUS and one CCARD only because they are connected separately to the SD Memory Card host. Host should consider total bus capacitance for each signal as the sum of CHOST, CBUS, and CCARD, these parameters are defined by per signal. The host can determine CHOST and CBUS so that total bus capacitance is less than the card estimated capacitance load (CL=40 pF). The SD Memory Card guarantees its bus timing when total bus capacitance is less than maximum value of CL (40 pF). 4 Transcend Information Inc. TS4/8GUSDHC6-P3 • Bus Signal Levels 4/8GB microSDHC Class 6 Card + Reader P3 As the bus can be supplied with a variable supply voltage, all signal levels are related to the supply voltage. To meet the requirements of the JEDEC specification JESD8-1A and JESD8-7, the card input and output voltages shall be within the following specified ranges for any VDD of the allowed voltage range: Parameter Output HIGH voltage Output LOW voltage Input HIGH voltage Input LOW voltage Symbol VOH VOL VIH VIL Min. 0.75* VDD Max. 0.125* VDD Unit V V V V Remark IOH = -100 µA @VDD min IOL = -100 µA @VDD min 0.625* VDD VSS – 0.3 VDD + 0.3 0.25* VDD 5 Transcend Information Inc. TS4/8GUSDHC6-P3 • Bus Timing 4/8GB microSDHC Class 6 Card + Reader P3 Parameter Clock frequency Data Transfer Mode Clock frequency Identification Mode Clock low time Clock high time Clock rise time Clock fall time Inputs CMD, DAT (referenced to CLK) Input set-up time Input hold time Outputs CMD, DAT (referenced to CLK) Symbol fPP fOD tWL tWH tTLH tTHL tISU tIH Min 0 0(1)/100 10 10 Max. 25 400 Unit MHz KHz ns ns Remark CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) Clock CLK (All values are referred to min (VIH) and max (VIL) 10 10 5 5 ns ns ns ns 6 Transcend Information Inc. TS4/8GUSDHC6-P3 Output Delay time during Data Transfer Mode tODLY 4/8GB microSDHC Class 6 Card + Reader P3 0 14 ns CL ≤ 40 pF, (1 card) Output Delay time during Identification Mode tODLY 0 50 ns CL ≤ 40 pF, (1 card) (1) 0 Hz means to stop the clock. The given minimum frequency range is for cases were continues clock is required 7 Transcend Information Inc. TS4/8GUSDHC6-P3 • Bus Timing (High Speed Mode) 4/8GB microSDHC Class 6 Card + Reader P3 Parameter Clock frequency Data Transfer Mode Clock low time Clock high time Clock rise time Clock fall time Inputs CMD, DAT (referenced to CLK) Input set-up time Input hold time Outputs CMD, DAT (referenced to CLK) Symbol fPP tWL tWH tTLH tTHL tISU tIH Min 0 7 7 Max. 50 Unit MHz ns ns Remark CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) CCARD ≤ 10 pF, (1 card) Clock CLK (All values are referred to min (VIH) and max (VIL) 3 3 6 2 ns ns ns ns 8 Transcend Information Inc. TS4/8GUSDHC6-P3 Output Delay time during Data Transfer Mode Output Hold time 1 4/8GB microSDHC Class 6 Card + Reader P3 tODLY tOH 2.5 40 14 ns ns pF CL ≤ 40 pF, (1 card) CL ≤ 40 pF, (1 card) (1 card) Total System capacitance for each line CL 1) In order to satisfy severe timing, host shall drive only one card. 9 Transcend Information Inc. TS4/8GUSDHC6-P3 Reliability and Durability Temperature Moisture and corrosion 4/8GB microSDHC Class 6 Card + Reader P3 Operation: -25° / 85° (Target spec) C C Operation: 25° / 95% rel. humidity C Storage: 40° / 93% rel. hum./500h C Salt Water Spray: 3% NaCl/35C; 24h acc. MIL STD Method 1009 10.000 mating cycles; test procedure: tbd. 10N 0.15N.m or +/-2.5 deg 1.5m free fall UV: 254nm, 15Ws/cm² according to ISO 7816-1 0.1 Gy of medium-energy radiation (70 keV to 140 keV, cumulative dose per year) to both sides of the card, according to ISO7816-1. No warp page; no mold skin; complete form; no cavities surface smoothness