VPL28-2000

P OWE R T RAN S FO R M E R Chassis Mount : International Series VPL28-2000 Electrical Specifications (@25C) 1. Maximum Power: 56.0VA 2. Input Voltage – Series: 230VAC @ 50/60Hz, Parallel: 115VAC @ 50/60Hz 3. Output Voltage – Series: 28.0V CT@ 2.00A, Parallel: 14.0V @ 4.00A 4. Voltage Regulation: 20% TYP @ full load to no load 5. Hipot: 3500VAC between primary to secondary and windings to core. Construction: Picture for illustration Purposes only Dual winding construction with an insulated shroud, both made of a high temperature material that exceeds UL flammability requirements. Shrouds are provided over the connections of the leads to the windings on both primary and secondary coils. Devices are designed with a minimum of 6mm creepage distance between the primary and secondary and are manufactured with a Class B (130°C) insulation system Agency Files: TUV: File R72182067, EN 61558-1:2005+A1, EN61558-2-6:2009. Double Insulated. Non-inherently Short-Circuit-Proof. V IO ORN GRY RED B LK W HT B RN RED/YEL B LU Dimensions: B Units: In inches A B C D E 3.062 2.562 2.625 2.00 2.250 Y EL D Weight: 2.7 lbs. Lead Length: 7” C VIO 1 Connections : BLK WHT ORN GRY A RED BRN RED/YEL BLU YEL Series – BLK to BLU, Jumper WHT to BRN Parallel – BLK to BLU, Jumper BLK to BRN and WHT to BLU Output: Series – VIO to YEL, Jumper GRY to RED Parallel – VIO to YEL, Jumper VIO to RED and GRY to YEL Input: E RoHS Compliance: As of manufacturing date February 2016, all standard products meet the requirements of 2015/863/EU, known as the RoHS 3 initiative. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. 1 Primary and secondary windings are designed to be connected in series or parallel. Windings are not intended to be used independently. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 Publish Date: August 30, 2021