VPS20-2200-B

POWE R TRANS FORME R CHASSIS MOUNT : QUICK-CONNECT WORLD SERIES ™ VPS20-2200 Electrical Specifications (@25C) 1. Maximum Power: 43VA 2. Primary - Series: 230VAC@50/60Hz; Parallel: 115VAC@50/60Hz 3. Secondary - Series1: 20.0V CT@ 2.2A; Parallel2: 10.0V @ 4.4A 4. Voltage Regulation: 25% TYP @ full load to no load 5. Temperature Rise: 30C TYP (45C MAX allowed) 6. Insulation Resistance: 100MΩ 7. Recommended Fuse3: Series: Littelfuse p/n 313 2.5HXP, 2.5A 250V, slow blow, ¼ x 1 ¼ or, Cooper Bussmann p/n BKMDL-2 ½, 2.5A 250V, ¼ x 1 ¼ Parallel: Littelfuse p/n 313 5.0HXP, 5A 250V, slow blow, ¼ x 1 ¼ or, Cooper Bussmann p/n BKMDL-5, 5A 250V, ¼ x 1 ¼ Picture for Illustration Purposes only D B Construction: Dual bobbin construction with an insulated shroud, both made of a high temperature material that exceeds UL flammability requirements. Safety: These units are designed with 4000VAC isolation between the primary and secondary, and also, between each winding and the core. Agency File: C UL: File E53148, UL 5085-1 and 2 (formerly UL 506), General Purpose. File E65390, UL 5085-1 and 3 (formerly UL1585), Class 2/3 CSA: File LR 221330. C22.2 NO. 66, General Purpose. TUV: File R72182067, EN 61558-1:2005+A1, EN61558-2-6:2009. Double Insulated. Non-inherently Short-Circuit-Proof. A 6 5 12 11 2 8 7 H A. Dimensions: Unit: In inches H W D A B C T MW ML 2-11/16 3-1/8 2 2-5/16 1-1/8 5/16 3/16 2-13/16 - 1 T B. Mounting Hole Size: 3/16” C. WT Lbs. : 1.6 D. Terminal Size: 0.187” x 0.020” Connections4: Series – 6 and 1, Jumper 5 to 2 Parallel – 6 and 1, Jumper 6 to 2 and 5 to 1 Output: Series – 12 and 7, Jumper 11 to 8 Parallel – 12 and 7, Jumper 12 to 8 and 11 to 7 Input: RoHS Compliance: As of manufacturing date February 2016, all standard products meet the requirements of 2015/863/EU, known as the RoHS 3 initiative. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. MW 6 W 6 12 5 2 11 8 1 7 1 Non-Inherently limited. Class 2 not wet, Class 3 wet. Non-Inherently limited. Class 2. 3 Fuse must be used on secondary as conditions of acceptability for UL Class2/3 operation. 4 Primary and secondary windings are designed to be connected in series or parallel. Windings are not intended to be used independently. 2 Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 SCHEMATIC Publish Date: August 26, 2021