PD40-25

40 WATT DC TO DC CONVERTERS DESCRIPTION T he PD40 series of DC/DC converters provide up to 40 watts of continuous output power. Available in three standard input ranges of 10-30 VDC, 20-60 VDC and 30-90 VDC, they are ideal for a variety of applications including telecoms, process control, portable equipment and vehicle mounted instrumentation. All units are available in compact “open PCB” or “enclosed” mechanical formats. P D40 SERIES F E ATU R E S ‧ ‧ ‧ ‧ ‧ ‧ Low cost Small size, light weight 100﹪ burn-in Overvoltage protection Overcurrent protection Three wide input ranges: 1 0-30 VDC, 20-60 VDC and 30-90 VDC I N P U T S P E C I F I C ATI O N S Input voltage： 10 to 30 VDC（ PD40 “L” series） 20 to 60 VDC（ PD40 “M” series） 30 to 90 VDC（ PD40 “H” series） 2.5A（ rms） for 24 VDC 1.3A（ rms） for 48 VDC 0.84A（ rms） for 72 VDC E N V I R O N M E N TA L S P E C I F I C ATI O N S Operating temperature： St o r a g e t e m p e r a t u r e ： Relative humidity： Derating： 0℃ to +70℃ -40℃ to +85℃ 5﹪ to 95﹪ non-condensing Derate from 100﹪ at +50℃ linearly to 50﹪ at +70℃ Input current： O UTPUT SPECIFICATIONS O utput voltage/current ： Total output power ： R ipple and noise ： O vervoltage protection ： S ee rating chart 4 0 watts maximum 1 ﹪ peak to peak max. s et at 112 - 132 ﹪ of its nominal output voltage A ll outputs protected to short circuit conditions A ll outputs ±0.04 ﹪ / ℃ m aximum M aximum excursion of 4 ﹪ or b etter on all models, recovering to 1 ﹪ of final value within 500us after a 25 ﹪ step load change G ENERAL SPECIFICATIONS S witching frequency ： E fficiency ： L ine regulation ： W ithstand voltage ： 3 6KHz ±5KHz 7 0 ﹪ minimum at full load ± 0.5 ﹪ maximum at full load 1 000VDC from input to output 6 00,000 hours minimum at full load at 25 ℃ ambient, calculated per MIL-HDBK-217F O vercurrent protection ： M TBF ： Temperature coefficient ： Transient response ： Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● w ww.TRUMPower.com DC TO DC CONVERTERS OUTPUT VOLTAGE/CURRENT RATING CHART PD40 SERIES Maximum (1)(2) Output #1 Output #2 Output #3 Output Model Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Power(3) PD40-10 5V 0A 8.0A 2% (N/A) (N/A) 40W PD40-12 12V 0A 3.5A 1% (N/A) (N/A) 40W PD40-13 15V 0A 3.0A 1% (N/A) (N/A) 40W PD40-14 24V 0A 2.0A 1% (N/A) (N/A) 40W PD40-23 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% (N/A) 40W PD40-24 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% (N/A) 40W PD40-25 +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% (N/A) 40W PD40-30 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -5V 0A 0.8A 5% 40W PD40-31 +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -12V 0A 0.8A 5% 40W PD40-32 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -15V 0A 0.8A 5% 40W PD40-33 +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -12V 0A 0.8A 5% 40W PD40-39 +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% -12V 0A 0.8A 5% 40W Notes: (1) All multi-output units may be operated at no-load without damage. At no-load, output tolerance increases to 10%. (2) Suffix codes for mechanical format and input range are as follows. PD40-XXYZ; “XX” is the model code from the above table, “Y” is the input range (L=10-30 VDC, M=20-60 VDC, H=30-90 VDC) and “Z” is the mechanical format (A=open PCB, B=L-bracket, C=enclosed), e.g. PD40-31MC (20-60 VDC input range, enclosed). (3) “L” series is suitable only for 75% of the above stated maximum output power. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3041 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3061 and Molex 2878 series crimp terminal. 5. Weight: 220 grams approx. (PCB format) 6. See the mechanical details of L-bracket and enclosed formats in page 7-1. PIN CHART PIN MODEL PD40-10 PD40-13 PD40-23 PD40-25 PD40-30 PD40-32 PD40-39 PD40-12 PD40-14 PD40-24 PD40-31 PD40-33 1 2 3 4 5 6 OUTPUT #1 OUTPUT #2 OUTPUT #2 OUTPUT #1 OUTPUT #1 OUTPUT #1 OUTPUT #1 OUTPUT #1 OUTPUT #1 RETURN COMMON RETURN COMMON RETURN RETURN COMMON RETURN COMMON RETURN RETURN N.C. OUTPUT #3 Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● w ww.TRUMPower.com