T7-2S1215N

T TRUMPower DC/DC CONVERTERS T7-2N Series 14-Pin DIP, Unregulated 2 Watt *MODEL NUMBER OUTPUT VOLTAGE 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC OUTPUT CURRENT 500 400 167 134 mA mA mA mA OUTPUT POWER 1.7W 2W 2W 2W 2W 2W 2W 5 VDC IN T7-2S053.3N T7-2S0505N T7-2S0512N T7-2S0515N T7-2D0505N T7-2D0512N T7-2D0515N 12 VDC IN T7-2S123.3N T7-2S1205N T7-2S1212N T7-2S1215N T7-2D1205N T7-2D1212N T7-2D1215N 24 VDC IN T7-2S243.3N T7-2S2405N T7-2S2412N T7-2S2415N T7-2D2405N T7-2D2412N T7-2D2415N ±200 mA ±84 mA ±67 mA * Add suffix "H" for 3K VDC isolation version. 48V input and other input/output combinations are also available. ELECTRICAL SPECIFICATIONS All Specifications Typical @+25°C, Nominal Line, and Full Load Unless Otherwise Noted. INPUT SPECIFICATIONS Input Voltage Range.................................................±10% Input Filter........................................................Capacitors OUTPUT SPECIFICATIONS Voltage Accuracy..............................................±5%, Max. Voltage Balance, Balance Load.......................±1%, Max. Line Regulation, FL...............................±1.2%/%Vin, Typ. Load Regulation, FL-20%FL.............................±8%, Typ. Ripple and Noise, 20MHz BW..................75 mVp-p, Max. Short Circuit Protection...................................Momentary GENERAL SPECIFICATIONS Efficiency.............................................................72- 85% Isolation Voltage, Input to Output........1K VDC, Standard 3K VDC, Suffix "H" Isolation Resistance...................................109 Ohms, Min. Isolation Capacitance.......................................60pF, Typ. Switching Frequency.....................................80 kHz, Typ. Operating Temperature, No Derating.......-25°C to +71°C Storage Temperature Range..................-40°C to +125°C Cooling...............................................Free Air Convection MTBF per MIL-HDBK-217F @25°C..........>2,000k Hours Weight....................................................0.1 oz. (3 grams) Case Material.....................Non-Conductive Black Plastic PIN CONNECTIONS STANDARD PIN 1 7 8 9 10 11 14 SINGLE -Vin *NC *NP +Vout *NP -Vout +Vin DUAL -Vin *NC Com. +Vout *NP -Vout +Vin 3K VDC ISOLATION SINGLE -Vin *NC +Vout *NP -Vout *NP +Vin DUAL -Vin *NC +Vout Com. -Vout *NP +Vin *NC: No Connection *NP: No Pin 0.10 (2.54) 0.80 (20.32) 0.10 (2.54) 14 1 BOTTOM VIEW 8 H 0.27 (6.85) 0.12 (3.05) 0.30 (7.62) 0.40 (10.16) 7 PIN SIZE: 0.02 X 0.01 INCH ALL DIMENSIONS IN INCHES (mm) -01/2008- Tumbler Technologies + TRUMPower • Santa Clara, CA • 408-988-6616 • sales@trumpower.com • www.TRUMPower.com