1.5SMC120

1.5SMC SERIES Pb RoHS COMPLIANCE 1500 Watts Surface Mount Transient Voltage Suppressor SMC/DO-214AC Features For surface mounted application in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min Typical IR less than 1uA above 10V High temperature soldering guaranteed: 260℃ / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 1500 watts peak pulse power capability with a 10 / 1000 us waveform Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Standard packaging: 16mm tape (EIA STD RS-481) Weight: 0.21 gram Dimensions in inches and (millimeters) Marking Diagram XXX G Y M = Specific Device Code = Green Compound = Year = Work Month Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified Type Number Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1) Power Dissipation on Intinite Heatsink, TA=50℃ Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)(Note 2) - Unidirectional Only Thermal Resistance Junction to Ambient Air Thermal Resistance Junction to Leads Operating and Storage Temperature Range Symbol PPK PD IFSM RθJA RθJL TJ, TSTG Value 1500 6.5 200 50 15 -55 to +150 Unit Watts Watts Amps ℃/W ℃/W ℃ Note 1: Non-repetitive Current Pulse, Per Fig. 3 and Derated above TA=25℃ Per Fig. 2 Note 2: Mounted on 8mm x 8mm copper pads to each terminal Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types 1.5SMC6.8 through Types 1.5SMC200A 2. Electrical Characterstics Apply in Both Directions Version:F11 RATINGS AND CHARACTERISTIC CURVES (1.5SMC SERIES) FIG. 1 PEAK PULSE POWER RATING CURVE 100 PPPM, PEAK PULSE POWER, KW NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA = 25℃ PEAK PULSE POWER(P PP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) FIG.2 PULSE DERATING CURVE 125 100 75 50 25 0 10 1 0.1 0.1 1 10 100 1000 10000 tp, PULSE WIDTH, (uS) 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (oC) FIG. 3 CLAMPING POWER PULSE WAVEFORM 140 PEAK PULSE CURRENT (%) 120 100 80 60 40 20 td 0 0 0.5 1 1.5 2 t, TIME ms 2.5 3 3.5 4 PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM 200 FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 8.3mS Single Half Sine Wave JEDEC Method IFSM, PEAK FORWARD SURGE A CURRENT (A) tr=10usec Peak Value IPPM 180 160 140 120 100 80 60 40 20 0 1 Half Value-IPPM/2 10/1000usec, WAVEFORM as DEFINED by R.E.A. 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 5 TYPICAL JUNCTION CAPACITANCE 10000 CJ, JUNCTION CAPACITANCE (pF) A UNIDIRECTIONAL BIDRECTIONA VR=0 1000 100 TA=25℃ f=1.0MHz Vsig=50mVp-p VR-RATED STAND-OFF VOLTAGE 10 1 10 V(BR), BREAKDOWN VOLTAGE (V) 100 Version:F11 ELECTRICAL CHARACTERISTICS (TA=25 ℃ unless otherwise noted) GENERAL PART NUMBER 1.5SMC6.8 1.5SMC6.8A 1.5SMC7.5 1.5SMC7.5A 1.5SMC8.2 1.5SMC8.2A 1.5SMC9.1 1.5SMC9.1A 1.5SMC10 1.5SMC10A 1.5SMC11 1.5SMC11A 1.5SMC12 1.5SMC12A 1.5SMC13 1.5SMC13A 1.5SMC15 1.5SMC15A 1.5SMC16 1.5SMC16A 1.5SMC18 1.5SMC18A 1.5SMC20 1.5SMC20A 1.5SMC22 1.5SMC22A 1.5SMC24 1.5SMC24A 1.5SMC27 1.5SMC27A 1.5SMC30 1.5SMC30A 1.5SMC33 1.5SMC33A 1.5SMC36 1.5SMC36A 1.5SMC39 1.5SMC39A 1.5SMC43 1.5SMC43A 1.5SMC47 1.5SMC47A 1.5SMC51 1.5SMC51A 1.5SMC56 1.5SMC56A 1.5SMC62 1.5SMC62A 1.5SMC68 1.5SMC68A 1.5SMC75 1.5SMC75A 1.5SMC82 1.5SMC82A 1.5SMC91 1.5SMC91A Device Marking Code DDJ DEJ DFJ DGJ DHJ DKJ DLJ DMJ DNJ DPJ DQJ DRJ DSJ DTJ DUJ DVJ DWJ DXJ DYJ DZJ EDJ EEJ EFJ EGJ EHJ EKJ ELJ EMJ ENJ EPJ EQJ ERJ ESJ ETJ EUJ EVJ EWJ EXJ EYJ EZJ FDJ FEJ FFJ FGJ FHJ FKJ FLJ FMJ FNJ FPJ FQJ FRJ FSJ FTJ FUJ FVJ Breakdown Voltage VBR (V) (Note 1) Min 6.12 6.46 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 Max 7.48 7.14 8.25 7.88 9.02 8.61 10.00 9.55 11.00 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 Test Current IT (mA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-Off Voltage VWM (V) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 Maximum Maximum Maximum Maximum Reverse Leakage Peak Pulse Clamping Voltage Temperature @ VWM Current IPPM @ IPPM Coefficient ID (uA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 (A) (Note 2) 145 150 134 139 126 130 114 117 105 108 97 100 91 94 82 86 71 74 67 70 59 60 54 56 49 51 45 47 40 42 36 38 33 34 30 31 27 29 25 26 23 24 21 22 19 20 17 18 16 17 14 15 13 13.9 12 12.6 Vc(V) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 of VBR(%/℃) 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 Version:F11 ELECTRICAL CHARACTERISTICS (TA=25 ℃ unless otherwise noted) GENERAL PART NUMBER 1.5SMC100 1.5SMC100A 1.5SMC110 1.5SMC110A 1.5SMC120 1.5SMC120A 1.5SMC130 1.5SMC130A 1.5SMC150 1.5SMC150A 1.5SMC160 1.5SMC160A 1.5SMC170 1.5SMC170A 1.5SMC180 1.5SMC180A 1.5SMC200 1.5SMC200A Device Marking Code FWJ FXJ FYJ FZJ GDJ GEJ GFJ GGJ GHJ GKJ GLJ GMJ GNJ GPJ GQJ GRJ GSJ GTJ Breakdown Voltage VBR (V) (Note 1) Min 90 95 99 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 Max 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 Test Current IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-Off Voltage VWM (V) 81.0 85.5 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 Maximum Maximum Maximum Maximum Reverse Leakage Peak Pulse Clamping Voltage Temperature @ VWM Current IPPM @ IPPM Coefficient ID (uA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 (A) (Note 2) 10.9 11.4 9.9 10.3 9.1 9.5 8.4 8.7 7.3 7.6 6.8 7.1 6.4 6.7 6.1 6.4 5.4 5.7 Vc(V) 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 of VBR(%/℃) 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 Notes: 1. VBR measure after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure. 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. For bidirectional use C or CA suffix for types 1.5SMC6.8 through 1.5SMC200A 5. All terms and symbols are consistent with ANSI/IEEE C62.35. Version:F11