1N4007GP

1N4001GP THRU 1N4007GP 1.0 AMP. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere Features a a a a a a a High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.0 ampere operation at TA=75oC and 55oC with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension DO-41 Mechanical Data a a a a Case: JEDEC DO-41 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.012 ounce, 0.3 gram a Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25+ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% 1N 1N 1N Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TA = 75+ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @1.0A Maximum DC Reverse Current @ TA=25+ at Rated DC Blocking Voltage @ TA=125+ Maximum Full Load Reverse Current , Full Cycle Average .375”(9.5mm) Lead Length @TA=75+ Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance R JA ( Note 2 ) Operating and Storage Temperature Range TJ ,TSTG 1N 1N 1N 1N 4001GP 4002GP 4003GP 4004GP 4005GP 4006GP 4007GP Units V V V A A V uA uA uA pF +/W + 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30 1.1 5.0 50 30 8.0 55 -65 to +175 600 420 600 800 560 800 1000 700 1000 Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4..0 Volts D.C. 2. Thermal Resistance from Junction to Ambient .375” (9.5mm) Lead Length. . RATINGS AND CHARACTERISTIC CURVES (1N4001GP THRU 1N4007GP) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT. (A) 1.0 30 FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT. (A) 0.8 25 0.6 20 Tj=Tj max 8.3ms Single Half Sine Wave JEDEC Method 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5m/m) LEAD LENGTH 15 0.2 10 0 5 0 20 40 60 80 100 120 o 140 160 180 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE. ( C) 10 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) Tj=125 0C 1 Tj=75 0C 1.0 0.1 0.1 Tj=25 0C 0.01 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0 0.01 .4 .6 .8 1.0 1.2 1.4 1.6 0.001 0 20 40 60 80 100 120 140 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 20 JUNCTION CAPACITANCE.(pF) 10 8 6 4 Tj=25 0C f=1.0MHz Vsig=50mVp-p 2 1 0.1 0.4 1.0 10 4.0 REVERSE VOLTAGE. (V) 40 100