1W02G

1W005G THRU 1W10G Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere Features UL Recognized File # E-96005 Glass passivated junction Surge overload ratings to 30 amperes peak Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension RB-15 Mechanical Data Case: Molded plastic Lead: Solder plated Polarity: As marked Weight: 1.07 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol 1W 1W Type Number 005G 01G Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC Maximum Average Forward Rectified Current @TA = 50℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range 1W 02G 1W 04G 1W 06G 1W 08G 1W Units 10G 200 140 200 400 280 400 1.0 30 1.0 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA ℃/W ℃ ℃ I(AV) IFSM VF IR RθJA RθJL TJ TSTG Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.2” x 0.2” (5mm x 5mm) Copper Pads. 10 500 36 13 -55 to +150 -55 to +150 - 696 - RATINGS AND CHARACTERISTIC CURVES (1W005G THRU 1W10G) 50 FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT AVERAGE FORWARD CURRENT. (A) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT. (A) 40 30 20 10 0 1 2 10 20 40 60 100 20 40 60 80 100 o 120 140 150 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C) FIG.3- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 20 10 0 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE Tj=125 0C 10 1 0.1 1 Tj=25 0C 0.01 0 0.2 0.4 0.6 0.8 1.0 FORWARD VOLTAGE. (V) 1.2 1.4 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 697 -