2W10M

2W005M THRU 2W10M Single Phase 2.0 AMPS. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes Features UL Recognized File # E-96005 Surge overload ratings to 50 amperes peak Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension WOB Mechanical Data Case: Molded plastic Lead: Solder plated Polarity: As marked Weight: 1.10 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol 2W 2W Type Number 005M 01M Maximum Recurrent Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current @TA = 50℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range 2W 02M 2W 04M 2W 06M 2W 08M 2W Units 10M 200 140 200 400 280 400 2.0 50 1.1 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA ℃/W ℃ ℃ I(AV) IFSM VF IR RθJA RθJL TJ TSTG Note: Thermal Resistance from Junction to Ambient and from Junction to Lead at 0.375” (9.5mm) Lead Length for P.C.B. Mounting. 10 500 40 15 -55 to +125 -55 to +150 - 666 - RATINGS AND CHARACTERISTIC CURVES (2W005M THRU 2W10M) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT PEAK FORWARD SURGE CURRENT. (A) 50 8.3ms Single Half Sine Wave JEDEC Method 2.0 FIG.2- MAXIMUM CURRENT DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD CURRENT. (A) RESISTIVE INDUCTIVE LOAD 1.5 40 30 1.0 20 0.5 10 0 1 10 NUMBER OF CYCLES AT 60Hz 100 0 20 40 80 100 60 o AMBIENT TEMPERATURE. ( C) 120 140 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 20 10 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 10 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) TJ=100 0C 1 1 Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE 0 0.1 0.1 TJ=25 0C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. (V) 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 667 -